Non-Marring Aluminum Gets The Tightest Bushings Loose
The perfect tool for every 1911 owner’s range bag or cleaning kit. Precision machined for a close fit to Government Model and Officers bushings. The extra thick, contoured handle fits comfortably in your hand; has plenty of heft for a good, solid grip. Turns the tightest bushings without slipping. Enhanced model has a handy flange that retains the recoil spring plug as you twist the bushing free. No more flying springs or plugs!
Icke-Märkande Aluminium Får Loss De Tätaste Bussningarna
Det perfekta verktyget för varje 1911-ägares skjutväska eller rengöringssats. Precisionstillverkad för en nära passform till Government Model och Officers bussningar. Det extra tjocka, konturerade handtaget passar bekvämt i din hand; har tillräckligt med tyngd för ett bra, stadigt grepp. Vrider de tätaste bussningarna utan att glida. Förbättrad modell har en praktisk fläns som håller kvar rekylfjäderpluggen när du vrider bussningen fri. Inga fler flygande fjädrar eller pluggar!
Kundernas betyg påBROWNELLS 1911 AUTO ANODIZED BUSHING WRENCH
Antal betyg: 9
Från brownells.com: 9
Medelbetyg: 4,8
valuable tool(2011-01-20)
great tool for field stripping /removing bushing, tab helps to keep spring from flying out for disassembly, must have for replacing the bushing. Good fit, tight tolerances.
I would recommend to a friend(2013-01-06)
bought the regular wrench works perfect going to get this enhanced one great idea
Great for a Les Baer(2014-04-27)
It's easy to develop a technique where the wrench is placed on a firm flat surface and the 1911 is pushed down on the wrench. A simple twist will insert of remove the plug very safely. Stop cursing your tight-fitting Les Baer. Instead, buy another.
Best bushing tool I have used(2014-09-18)
Don't waste your money on any other wrench. This is the best I have ever used. Tool is extremely well made.
Plastic wrench didn't last but one time, this one will probably last for life.
Get This One(2015-02-11)
Bought several plastic offset bushing wrenches for use on my 10mm pistols as the spring ratings on them are very high and controlling the recoil plug during disassembly and reassembly was exciting at times. The plastic ones are OK but they flex when applying the pressure necessary to control a high rated recoil spring. This one is tough enough to handle the job. Get this and it'll handle anything you can dish out.
Worth it(2016-06-29)
I am generally an extremely frugal person, and I admit I initially had some misgivings about paying this much for a bushing wrench. Those misgivings were erased the first time I used it. It should last a lifetime and the additional little notch really helps with Dan Wesson assembly. Buying this IS being frugal, it'll never need replacing and time is money.
The description doesn't lie(2010-12-10)
It really is all they say. The Kart bushing on my Rock River Arms 1911 is as tight as they get. I've destroyed several of the "Cant Mar" synthetic wrenches and another aluminum wrench trying to wrestle my bushing off before I purchased one of these. Worked like a charm and didn't leave a mark on my parkerized bushing. Great wrench....worth the extra cost.
A quality tool(2011-02-14)
This is the Cadillac of bushing wrenches, no doubt about it. It fits comfortably in the hand, with gently rounded edges. It allows a firm grip without cutting into your hand.
When you need one ... you need one(2015-01-03)
I had made it through life with a "synthetic" (plastic ... polymer ... whatever term you like) bushing wrench. Then I ran into a pistol with a tight - and I mean really tight - bushing. Not sure how the original gunsmith got it on.
That's when I got religion and bought 2 of these. Sure, they're pricier than the plastic versions, but when the plastic versions break, you'll appreciate this one.
Produktnr: 080045200 BROWNELLS 1911 AUTO ANODIZED BUSHING WRENCH050806102880 Det perfekta verktyget för varje 1911-ägares skjutväska eller rengöringssats. Precisionstillverkad för en nära passform till Government Model och Officers bussningar. Det extra tjocka, konturerade handtaget passar bekvämt i din hand; har tillräckligt med tyngd för ett bra, stadigt grepp. Vrider de tätaste bussningarna utan att glida. Förbättrad modell har en praktisk fläns som håller kvar rekylfjäderpluggen när du vrider bussningen fri. Inga fler flygande fjädrar eller pluggar!
389SEK0389,00 kr
*
Restorder. Skickas när den finns i lager. Leveranstid ca 4-12 veckor från centrallagret.
Produktnr: 080045300 BROWNELLS 1911 AUTO ENHANCED ANODIZED BUSHING WRENCH050806109742 Det perfekta verktyget för varje 1911-ägares skjutväska eller rengöringssats. Precisionstillverkad för en nära passform till Government Model och Officers bussningar. Det extra tjocka, konturerade handtaget passar bekvämt i din hand; har tillräckligt med tyngd för ett bra, stadigt grepp. Vrider de tätaste bussningarna utan att glida. Förbättrad modell har en praktisk fläns som håller kvar rekylfjäderpluggen när du vrider bussningen fri. Inga fler flygande fjädrar eller pluggar!
479SEK0479,00 kr
*
Restorder. Skickas när den finns i lager. Leveranstid ca 4-12 veckor från centrallagret.
Non-Marring Aluminum Gets The Tightest Bushings Loose
The perfect tool for every 1911 owner’s range bag or cleaning kit. Precision machined for a close fit to Government Model and Officers bushings. The extra thick, contoured handle fits comfortably in your hand; has plenty of heft for a good, solid grip. Turns the tightest bushings without slipping. Enhanced model has a handy flange that retains the recoil spring plug as you twist the bushing free. No more flying springs or plugs!
Icke-Märkande Aluminium Får Loss De Tätaste Bussningarna
Det perfekta verktyget för varje 1911-ägares skjutväska eller rengöringssats. Precisionstillverkad för en nära passform till Government Model och Officers bussningar. Det extra tjocka, konturerade handtaget passar bekvämt i din hand; har tillräckligt med tyngd för ett bra, stadigt grepp. Vrider de tätaste bussningarna utan att glida. Förbättrad modell har en praktisk fläns som håller kvar rekylfjäderpluggen när du vrider bussningen fri. Inga fler flygande fjädrar eller pluggar!
Kundernas betyg påBROWNELLS 1911 AUTO ANODIZED BUSHING WRENCH
Antal betyg: 9
Från brownells.com: 9
Medelbetyg: 4,8
valuable tool(2011-01-20)
great tool for field stripping /removing bushing, tab helps to keep spring from flying out for disassembly, must have for replacing the bushing. Good fit, tight tolerances.
I would recommend to a friend(2013-01-06)
bought the regular wrench works perfect going to get this enhanced one great idea
Great for a Les Baer(2014-04-27)
It's easy to develop a technique where the wrench is placed on a firm flat surface and the 1911 is pushed down on the wrench. A simple twist will insert of remove the plug very safely. Stop cursing your tight-fitting Les Baer. Instead, buy another.
Best bushing tool I have used(2014-09-18)
Don't waste your money on any other wrench. This is the best I have ever used. Tool is extremely well made.
Plastic wrench didn't last but one time, this one will probably last for life.
Get This One(2015-02-11)
Bought several plastic offset bushing wrenches for use on my 10mm pistols as the spring ratings on them are very high and controlling the recoil plug during disassembly and reassembly was exciting at times. The plastic ones are OK but they flex when applying the pressure necessary to control a high rated recoil spring. This one is tough enough to handle the job. Get this and it'll handle anything you can dish out.
Worth it(2016-06-29)
I am generally an extremely frugal person, and I admit I initially had some misgivings about paying this much for a bushing wrench. Those misgivings were erased the first time I used it. It should last a lifetime and the additional little notch really helps with Dan Wesson assembly. Buying this IS being frugal, it'll never need replacing and time is money.
The description doesn't lie(2010-12-10)
It really is all they say. The Kart bushing on my Rock River Arms 1911 is as tight as they get. I've destroyed several of the "Cant Mar" synthetic wrenches and another aluminum wrench trying to wrestle my bushing off before I purchased one of these. Worked like a charm and didn't leave a mark on my parkerized bushing. Great wrench....worth the extra cost.
A quality tool(2011-02-14)
This is the Cadillac of bushing wrenches, no doubt about it. It fits comfortably in the hand, with gently rounded edges. It allows a firm grip without cutting into your hand.
When you need one ... you need one(2015-01-03)
I had made it through life with a "synthetic" (plastic ... polymer ... whatever term you like) bushing wrench. Then I ran into a pistol with a tight - and I mean really tight - bushing. Not sure how the original gunsmith got it on.
That's when I got religion and bought 2 of these. Sure, they're pricier than the plastic versions, but when the plastic versions break, you'll appreciate this one.