Varukorgen är tom.

Varukorg

Hjälp och kontakt

Fri frakt på beställningar över 2.999 kr

100 dagars returrätt

Nyhetsbrev

REA

Över 300 000 kunder - vi säger tack!

4,93/5 "Mycket bra" (1400+ recensioner)

40 000+ produkter inom jakt och skytte

WILSON COMBAT
1911 SHOK-BUFFS®

874218000752 965002004

Softens The Blow Of Recoil; Helps Prevent Frame Damage

Prevents expensive frame damage when shooting high-pressure, major power factor loads. Replaceable, poly-fiber washer installs behind the recoil spring on any length guide rod. The shock absorbing action stops the slide from battering the frame. Injection molded for the optimum balance between shock absorption and longevity. Replace every 1,000 rounds.

SPECS: Poly-fiber, blue. 6 Shok-Buffs per pak. Not for use in Officer's ACP Models.

Mer...

Mildrar Rekylen; Hjälper Till Att Förhindra Stomskador

Förhindrar kostsamma skador på stommen vid skjutning med högtrycks, major power factor-laddningar. Utbytbar polyfiberbricka som installeras bakom rekylfjädern på valfri längd av guide rod. Den stötabsorberande funktionen stoppar sliden från att slå mot stommen. Formsprutad för optimal balans mellan stötabsorption och livslängd. Byt ut varje 1 000 skott.

SPECIFIKATIONER: Polyfiber, blå. 6 Shok-Buffs per förpackning. Ej för användning i Officer's ACP-modeller.

Mer...

Kundernas betyg påWILSON COMBAT SHOK-BUFFS® PAK

Antal betyg: 20
Från brownells.com: 20
Medelbetyg: 3,9

Seems good (2009-08-29)

It's hard for me to tell the difference but I think it helps with faster double taps. I have not compared it with and without side by side. It will put a cushion between the slide and frame and that has to be good. I am a fan of the buffer concept. There was no malfunctions as a result of installing it. It seems like it makes +P rounds less harsh on the kick. This was installed on a Kimber Warrior that is a 5" 1911 handgun with stock spring.

Quality (2009-09-11)

I have always used these on all my 1911 pistols. Great fit, easy install, does what it is designed to do.

Smoother Recoil (2009-10-31)

These Shok Buffs smooth out the slamming of the action. Less felt recoil, faster back on target.

I have them in both of my 1911s.

protect your .45 (2009-11-11)

I have used these buffers as well as others. They all do exactly what they are supposed to do. They keep the dust cover from coming into contact with the frame on your .45. This happens when a spring wears out or when an underpowered spring s put into the gun. It's a fine product that's cheap insurance.

These are tough! (2009-12-31)

Shot several hundred rounds on the same shock buffer, and have seen little change in the buffer. I can't say if they help, but it certainly hasn't hurt the function of my firearm, it doesn't get in the way, and it's cheap, so kind of like an aspirin a day, why not?

Very nice buffers! (2010-10-27)

Well, I purchase this buffers to make recoil softer and prevent damage on frame. I use them with 18.5 lb recoil spring because I shoot only factory loads 230 gr.Easy to install recoil is soft and double taps are fast!

Full length guide rod (2011-01-02)

I used this on my Taurus 1911..and I can say I have mixed feelings. First, they wear out after about 200 rounds max. I do have a full length guide rod in my 1911 so I'm not sure if that has something to do with their life span. They do reduce recoil for about the first 50-100 shots, then the gun starts to malfunction after that because they start to fall apart inside the gun. when they become distorted inside the gun, they keep the gun from cycling properly. They do indeed lower recoil....however I am not sure if they fail due to the full length guide rod or a Taurus design that may be slightly different than a standard 1911.

simple insurance (2011-05-04)

easy way to protect the frame and at just over a dollar apiece why not?

May not workwith a full size Kimber..... (2011-05-13)

I purchased these for my full size Kimber Stainless Raptor. Installation is a breeze and you can really feel the difference when you rack the slide: nice and soft at the end of travel instead of metal on metal. BUT: Because they decrease the distance the slide can travel rearward, the slide release will not move down on it's own when pulling the slide backwards. The only method of releasing the slide is to push the slide release down with your thumb.

Limit Slide Travel (2013-05-23)

I'll admit, this is a neat idea that is definitely worth considering with an aluminum frame pistol. That being said, these buffers limit the distance the slide can be retracted. As another reviewer mentioned, the slide stop cannot fully cam down with these installed. This requires the user to depress the slide stop to chamber the first round, which is the incorrect way to load a 1911.

If there was a recoil spring that was 1/16" shorter, these would be a perfect product.

Great Addition (2013-06-15)

Installed on my Ruger SR1911 in just a few seconds. I shot mine along with a friends that did not have one installed. The recoil reduction was small but noticeable. It's designed to also protect the frame from constant impact. I can't really comment on that, as it would take many thousands of rounds to see those effects. As a side note though, I would not use this on a carry/defensive weapon. It's one more thing that "could" go wrong, at the very wrong time. Mine is used solely for competition and target practice. I clean it after every range trip and inspect it at that time. Usually around the 1,000 round mark I notice it wearing down and replace it. They are very inexpensive insurance and the benefits completely outweigh the possible concerns for my application. I did not notice any shortened movement of the slide to the rear. The gun will return to battery whether I use the slide release or the "slingshot" method of reloading.

This is what they don't tell you (2014-02-07)

This is what they don't tell you. I am all for protecting you investment butt. When these are installed they do not allow the slide to move rearward far enough to release the slide stop. You have to release by pressing down on the slide stop. I called Wilson Combat and they admitted to the issue but that was it. If you are installing them on a range only gun that's fine. If you a installing them on a self-defense gun it's a different story.

100% functional in S&W 1911 E-Series (2014-10-09)

1) Shok buffs aren't meant to reduce felt recoil while firing. Instead, these are meant to (theoretically) increase the life of the 1911 frame against slide battering. For many veteran 1911 shooters, loss of ability to "sling shot" or "power stoke" a 1911 slide-locked gun equipped with a shok buff back to battery is already a known issue. The obvious solution is to simply press down on the slide stop to release the slide instead of using the slower sling shot or power stroke methods. Recommend using shok buffs only when practicing, plinking, and perhaps competing too (i.e., when of course the gun is most likely to be fired much). For SD/CCW, law enforcement, hunting, and tactical uses, simply don't install a shok buff (i.e., when the gun is not going to be fired much if at all). 2)I recently discovered that I could power stroke a slide-locked S&W 1911 E Series (SKU-108411 "Enhanced") that is equipped with a shok buff. The slide stop notch in the 1911 E Series slide is cut a little smaller than mil-spec allowing for this capability. In the context of the using shok buffs, I presume this is more by coincidence than by design.

f1

Shok-Buff = No Power Stroking (2014-10-15)

I wish I would have read the reviews closer. As many other shooters have stated, you can not power stroke the slide after loading because the shok-buff prevent the slide from going back far enough to release the slide stop. You must engage it by hand. So if you have small hands then you will have to learn to engage it with your left hand (or send them back to Brownell's like I'm about to do).

1911 shock absorber (2015-02-09)

great buffer and well made. Haven't worn out one yet, but had no issues on my Colt WWI & WWII Reproductions.

good idea BAD design (2015-04-20)

Pros is its affordable.

CONS are slide cycle wont lock on empty mag due to limited slide travel.

Would have been a great upgrade. So sad!

Great upgrade (2015-12-24)

Works great on my series 80 Colt. Still locks the slide back when empty, and I can still sling shot the slide. Maybe now I will not have to restake my front sight ever again.

Like um! (2016-04-03)

They work perfectly in all my 1911's. When I carry, no shock buff. When I shoot 100-200 rounds at the range, I run them. Never wore one out yet. I also use them in my Mini-14. Do you need them? Yeah, why not.

Great product (2017-01-09)

In several reviews people complained that the buffer limited travel of the slide and made releasing the slide into battery difficult. I installed one in my Kimber full size stainless, with a one piece full length guide rod, and experienced no such difficulty. The slide travels at least 1/16" beyond the point where the slide stop engages.This gun is about 12 years old and was a duty weapon for about 10 years (not by me) with the appropriate quantity of ammo through it for regular qualifications and practice. I am not sure if there are any changes to current production weapons would make a difference.

Can Cause Stoppages (2018-10-09)

Buyer beware. These buffers may hypothetically extend the life of [some of the components within] your 1911, however they will also cause repetitive stoppages due to the slide locking back prematurely. This is caused by the buffer not allowing the slide to stroke far enough back to move over the top of the slide stop and push it back down if it moves in to the up position from the impulse/vibration of the gun cycling. I've had this occur with multiple different brands of 1911s. All worked properly before installing the buffers and then resumed normal function once the buffer was removed. If they were slightly thinner, it might prevent this issue.

Läs 20 fler betyg på brownells.com

239 239 1 SEK

Produktnr: 965002004
WILSON COMBAT SHOK-BUFFS® PAK
Tillverkarens produktnummer: 2B 874218000752 Förhindrar kostsamma skador på stommen vid skjutning med högtrycks, major power factor-laddningar. Utbytbar polyfiberbricka som installeras bakom rekylfjädern på valfri längd av guide rod. Den stötabsorberande funktionen stoppar sliden från att slå mot stommen. Formsprutad för optimal balans mellan stötabsorption och livslängd. Byt ut varje 1 000 skott.

239 SEK 0 239,00 kr *

Restorder. Skickas när den finns i lager. Leveranstid ca 4-12 veckor från centrallagret.

Funktioner: Make: 1911 Modell: Government

Lägg till i inköpslista

Fråga om produkt

Information

Lägg till i inköpslista

Fråga om produkt

Top takeaways

Förhindrar kostsamma skador på stommen vid skjutning med högtrycks, major power factor-laddningar.
Utbytbar polyfiberbricka som installeras bakom rekylfjädern på valfri längd av guide rod.
Formsprutad för optimal balans mellan stötabsorption och livslängd, byt ut varje 1 000 skott.

Produktinformation

Make: 1911 Modell: Government Leveransvikt: 0,018kg Leveranshöjd: 38mm Leveransbredd: 83mm Leveranslängd: 140mm UPC : 874218000752

Produkt detaljer

Tillverkas i USA

Ansvarig ekonomisk aktör enligt EU-förordningen

Brownells Sverige AB
Box 99
793 22 Leksand
Sverige
info@brownells.se

Skydda din 1911 med WILSON COMBAT SHOK-BUFFS®! ✨ Stötabsorberande och hållbara, perfekta för högtrycksladdningar.

Softens The Blow Of Recoil; Helps Prevent Frame Damage

SPECS: Poly-fiber, blue. 6 Shok-Buffs per pak. Not for use in Officer's ACP Models.

Mer...

Mildrar Rekylen; Hjälper Till Att Förhindra Stomskador

SPECIFIKATIONER: Polyfiber, blå. 6 Shok-Buffs per förpackning. Ej för användning i Officer's ACP-modeller.

Mer...

Kundernas betyg påWILSON COMBAT SHOK-BUFFS® PAK

Antal betyg: 20
Från brownells.com: 20
Medelbetyg: 3,9

Seems good (2009-08-29)

Quality (2009-09-11)

I have always used these on all my 1911 pistols. Great fit, easy install, does what it is designed to do.

Smoother Recoil (2009-10-31)

These Shok Buffs smooth out the slamming of the action. Less felt recoil, faster back on target.

I have them in both of my 1911s.

protect your .45 (2009-11-11)

These are tough! (2009-12-31)

Very nice buffers! (2010-10-27)

Full length guide rod (2011-01-02)

simple insurance (2011-05-04)

easy way to protect the frame and at just over a dollar apiece why not?

May not workwith a full size Kimber..... (2011-05-13)

Limit Slide Travel (2013-05-23)

Great Addition (2013-06-15)

This is what they don't tell you (2014-02-07)

100% functional in S&W 1911 E-Series (2014-10-09)

Shok-Buff = No Power Stroking (2014-10-15)

1911 shock absorber (2015-02-09)

great buffer and well made. Haven't worn out one yet, but had no issues on my Colt WWI & WWII Reproductions.

good idea BAD design (2015-04-20)

Pros is its affordable.

CONS are slide cycle wont lock on empty mag due to limited slide travel.

Would have been a great upgrade. So sad!

Great upgrade (2015-12-24)

Works great on my series 80 Colt. Still locks the slide back when empty, and I can still sling shot the slide. Maybe now I will not have to restake my front sight ever again.

Like um! (2016-04-03)