The RCBS Uniflow Powder Measure will throw consistently accurate charges by volume with all types of smokeless powder. The straight forward measuring cylinder design helps eliminate powder hang ups which can lead to double charges or overcharges. The numbered measuring screw changes easily from charge to charge, and enables you to go back to a known charge at a later date. The precision ground cylinder is honed main casting produce a smooth and accurate powder dispensing system. Mount is a standard 7/8 to fourteen thread, comes with a bench or shelf bracket and two drop tubes for 22 caliber and up. Mounts on the RCBS Powder Measure or the Sinclair Powder Measure Stand (11-1200), accepts Sinclair Drop Tubes with a Sinclair Adapter. DO NOT USE WITH BLACK POWDER.
Mer...
RCBS Uniflow Powder Measure ger konsekvent exakta laddningar volymmässigt med alla typer av rökfritt krut. Den enkla konstruktionen av mätcylindern hjälper till att förhindra att krutet fastnar, vilket kan leda till dubbelladdningar eller överladdningar. Den numrerade mätskruven är enkel att ändra mellan olika laddningar och gör det möjligt att återgå till en känd laddning vid ett senare tillfälle. Den precisionsbearbetade cylindern är slipad i huvudgjutningen för att skapa ett smidigt och exakt system för krutdosering. Standardfästet är 7/8 till fjorton gängor, levereras med en bänk- eller hyllfäste och två dropprör för kaliber 22 och uppåt. Monteras på RCBS Powder Measure eller Sinclair Powder Measure Stand (11-1200), accepterar Sinclair Drop Tubes med en Sinclair-adapter. ANVÄND INTE MED SVARTKRUT.
Mer...
Kundernas betyg påRCBS UNIFLOW POWDER MEASURE DROP TUBE 17 TO 20 CAL
Antal betyg: 7
Från brownells.com: 7
Medelbetyg: 4,9
Helps a basic measure be more uniform.(2014-04-07)
I find this product a very inexpensive valuable upgrade.
The down side is you need to build or create a contraption to remove it for cleaning when changing powders. Or you could just unscrew the powder measure from its mount and dump it upside down and let it fall out.
It is kind of a mystery why this item is not included with the measure.
Solves powder flow issues(2015-10-27)
As a picky reloader, I try to exclude as many variables as possible from my reloading so that I am consistent across the board with my ammunition. By keeping the gravity feed pressure constant on the metering unit, the powder baffle allows more uniform powder charges. It also can help to keep powder (flake especially) from forming small clumps in humid weather.
The baffle has a hole in the center where the powder drains through. When you are done with that particular powder, or desire to remove the baffle for any reason, you can make an "L" shaped hook and lift the baffle out. As one reviewer pointed out, perhaps it should come with one, but a piece of 10 gauge copper wire solved the matter for me.
Great powder measure(2011-02-09)
I have had this measure for a long time. It does ball powder perfectly, not even a .05 grain variance. Extruded powders, and pistol flake powders are almost always within .1 grain up or down.
My Recommendation(2012-01-21)
I've been using one of these for years and swear by it. I've also used measures that cost twice as much, and this does the same job.
Excellent, but NOT for pistol as-sold(2012-09-24)
RCBS sells two versions of the Uniflow, one for rifle and one for pistol. HOWEVER, Brownells only sells the one with the rifle cylinder, and that is bad news for pistol reloaders, since charges down around 4 grains and less become increasingly variable. A charge setting for 3.5 grains will throw from 3 to 4 grains.
Size matters!(2012-02-01)
First, this item comes in two sizes, 0.500 and 0.685 diameter. This ad doesn't tell you which size you're getting. They both cost the same.
Second, the micrometer insert has been a great addition to my Uniflo Powder Measure. There has been a slight amount of trouble measuring very small powder charges, such as for a .380 Auto, a 9mm Luger, or a .38 Special. The Uniflo doesn't like such a small volume above the insert. There is also the standard problem of measuring flake powder by volume instead of by weight, but you'll get that problem in any volume powder dispenser.
I should have bought this baby much sooner!
wish i would have bought this long ago(2012-07-05)
Produktnr: 100010301 RCBS UNIFLOW POWDER MEASURE DROP TUBE 17 TO 20 CAL Tillverkarens produktnummer: 9028076683090287 RCBS Uniflow Powder Measure ger konsekvent exakta laddningar volymmässigt med alla typer av rökfritt krut. Den enkla konstruktionen av mätcylindern hjälper till att förhindra att krutet fastnar, vilket kan leda till dubbelladdningar eller överladdningar. Den numrerade mätskruven är enkel att ändra mellan olika laddningar och gör det möjligt att återgå till en känd laddning vid ett senare tillfälle. Den precisionsbearbetade cylindern är slipad i huvudgjutningen för att skapa ett smidigt och exakt system för krutdosering. Standardfästet är 7/8 till fjorton gängor, levereras med en bänk- eller hyllfäste och två dropprör för kaliber 22 och uppåt. Monteras på RCBS Powder Measure eller Sinclair Powder Measure Stand (11-1200), accepterar Sinclair Drop Tubes med en Sinclair-adapter. ANVÄND INTE MED SVARTKRUT.
229SEK5229,00 kr
*
Levernastid ca. 14-21 dagar. 5 st. i centrallagret.
RCBS Uniflow Powder Measure ger konsekvent exakta laddningar volymmässigt med alla typer av rökfritt krut.
Den numrerade mätskruven är enkel att ändra mellan olika laddningar och gör det möjligt att återgå till en känd laddning vid ett senare tillfälle.
Levereras med en bänk- eller hyllfäste och två dropprör för kaliber 22 och uppåt, och monteras på RCBS Powder Measure eller Sinclair Powder Measure Stand.
Produktnr: 100010300 RCBS UNIFLOW POWDER MEASURE POWDER BAFFLE Tillverkarens produktnummer: 90225076683902252 RCBS Uniflow Powder Measure ger konsekvent exakta laddningar volymmässigt med alla typer av rökfritt krut. Den enkla konstruktionen av mätcylindern hjälper till att förhindra att krutet fastnar, vilket kan leda till dubbelladdningar eller överladdningar. Den numrerade mätskruven är enkel att ändra mellan olika laddningar och gör det möjligt att återgå till en känd laddning vid ett senare tillfälle. Den precisionsbearbetade cylindern är slipad i huvudgjutningen för att skapa ett smidigt och exakt system för krutdosering. Standardfästet är 7/8 till fjorton gängor, levereras med en bänk- eller hyllfäste och två dropprör för kaliber 22 och uppåt. Monteras på RCBS Powder Measure eller Sinclair Powder Measure Stand (11-1200), accepterar Sinclair Drop Tubes med en Sinclair-adapter. ANVÄND INTE MED SVARTKRUT.
199SEK3199,00 kr
*
Levernastid ca. 14-21 dagar. 3 st. i centrallagret.
The RCBS Uniflow Powder Measure will throw consistently accurate charges by volume with all types of smokeless powder. The straight forward measuring cylinder design helps eliminate powder hang ups which can lead to double charges or overcharges. The numbered measuring screw changes easily from charge to charge, and enables you to go back to a known charge at a later date. The precision ground cylinder is honed main casting produce a smooth and accurate powder dispensing system. Mount is a standard 7/8 to fourteen thread, comes with a bench or shelf bracket and two drop tubes for 22 caliber and up. Mounts on the RCBS Powder Measure or the Sinclair Powder Measure Stand (11-1200), accepts Sinclair Drop Tubes with a Sinclair Adapter. DO NOT USE WITH BLACK POWDER.
Mer...
RCBS Uniflow Powder Measure ger konsekvent exakta laddningar volymmässigt med alla typer av rökfritt krut. Den enkla konstruktionen av mätcylindern hjälper till att förhindra att krutet fastnar, vilket kan leda till dubbelladdningar eller överladdningar. Den numrerade mätskruven är enkel att ändra mellan olika laddningar och gör det möjligt att återgå till en känd laddning vid ett senare tillfälle. Den precisionsbearbetade cylindern är slipad i huvudgjutningen för att skapa ett smidigt och exakt system för krutdosering. Standardfästet är 7/8 till fjorton gängor, levereras med en bänk- eller hyllfäste och två dropprör för kaliber 22 och uppåt. Monteras på RCBS Powder Measure eller Sinclair Powder Measure Stand (11-1200), accepterar Sinclair Drop Tubes med en Sinclair-adapter. ANVÄND INTE MED SVARTKRUT.
Mer...
Kundernas betyg påRCBS UNIFLOW POWDER MEASURE DROP TUBE 17 TO 20 CAL
Antal betyg: 7
Från brownells.com: 7
Medelbetyg: 4,9
Helps a basic measure be more uniform.(2014-04-07)
I find this product a very inexpensive valuable upgrade.
The down side is you need to build or create a contraption to remove it for cleaning when changing powders. Or you could just unscrew the powder measure from its mount and dump it upside down and let it fall out.
It is kind of a mystery why this item is not included with the measure.
Solves powder flow issues(2015-10-27)
As a picky reloader, I try to exclude as many variables as possible from my reloading so that I am consistent across the board with my ammunition. By keeping the gravity feed pressure constant on the metering unit, the powder baffle allows more uniform powder charges. It also can help to keep powder (flake especially) from forming small clumps in humid weather.
The baffle has a hole in the center where the powder drains through. When you are done with that particular powder, or desire to remove the baffle for any reason, you can make an "L" shaped hook and lift the baffle out. As one reviewer pointed out, perhaps it should come with one, but a piece of 10 gauge copper wire solved the matter for me.
Great powder measure(2011-02-09)
I have had this measure for a long time. It does ball powder perfectly, not even a .05 grain variance. Extruded powders, and pistol flake powders are almost always within .1 grain up or down.
My Recommendation(2012-01-21)
I've been using one of these for years and swear by it. I've also used measures that cost twice as much, and this does the same job.
Excellent, but NOT for pistol as-sold(2012-09-24)
RCBS sells two versions of the Uniflow, one for rifle and one for pistol. HOWEVER, Brownells only sells the one with the rifle cylinder, and that is bad news for pistol reloaders, since charges down around 4 grains and less become increasingly variable. A charge setting for 3.5 grains will throw from 3 to 4 grains.
Size matters!(2012-02-01)
First, this item comes in two sizes, 0.500 and 0.685 diameter. This ad doesn't tell you which size you're getting. They both cost the same.
Second, the micrometer insert has been a great addition to my Uniflo Powder Measure. There has been a slight amount of trouble measuring very small powder charges, such as for a .380 Auto, a 9mm Luger, or a .38 Special. The Uniflo doesn't like such a small volume above the insert. There is also the standard problem of measuring flake powder by volume instead of by weight, but you'll get that problem in any volume powder dispenser.
I should have bought this baby much sooner!
wish i would have bought this long ago(2012-07-05)