Produktinformation
- Laddverktygstyp: Bullet Seating Die
- Patron: 284 Shehane
- Leveransvikt: 0,585kg
- Leveranshöjd: 32mm
- Leveransbredd: 32mm
- Leveranslängd: 159mm
- UPC: 757253990014
Produktnr: 430107331
Tillv.nr.: U00091
757253990014 Forster Reloading Dies är av utmärkt kvalitet och ger omladdaren möjlighet att producera koncentriska patroner gång på gång. Varje die tillverkas av stål av högsta kvalitet som noggrant bearbetas till mycket snäva toleranser. Dies poleras för hand både före och efter härdningsprocessen för att garantera en extra fin finish. Alla Forster omladdningsdies har deras Forster Cross Bolt Die Locking Ring som stramar åt de två ändarna av den delade ringen istället för att strama åt en skruv direkt i gängorna på dies. Forster Ultra Seater inkluderar alla funktioner från Forster Bench Rest Seater Die ovan, plus en ultranoggrann mikrometerjustering. Denna mikrometerjustering gör att du kan justera kulans seatingdjup i steg om .0005 tum till .001 tum, och gör det enkelt att byta kulor - bara ställ tillbaka till din tidigare inspelade inställning. Forster Ultra Seaters gör det enkelt att finjustera dina kulor till landsen i din räffling.Good die but not for VLD bullets 2018-05-12
I have several of these Forster Ultra Micrometer Seating Dies in various calibers. All have worked very well with standard weight for caliber bullets of conventional shape. I bought this die to seat heavy for caliber bullets in a .223 bolt gun. Although the 80 grain Sierra Match King bullet is not technically a VLD design the seating stem of this die would not engage the bullet consistently. Seating depths would vary by a much as 10 thousandths of an inch. Sometimes the bullet tip would bottom out inside the cup of the seating stem. After diagnosing the problem I discovered Forster does not have a VLD stem available. I returned this die to Brownells and purchased another manufacturer's die that has a VLD stem. This is a very good seating die but perhaps not appropriate for long profile bullets.
Good but needed some work 2017-05-04
I use this to load for my AR, a Ruger Ranch Rifle and a TC Encore. It works fine but when I first received it some work was needed. I noticed that the sliding sleeve would catch partway up and found that the roll marking on the bottom of the sleeve was raised sufficiently to drag on the outer housing. It was significant and I have no doubt it would have caused issues. Also, the seater plug had a ridge around the bottom where the bullet entered that cause significant drag in the sleeve. A bit of careful stoning made things better although the seater still feels a bit rough in the sleeve. Roll marking after precision machining on the sleeve seems like a real bad idea.
Vi stötte på ett fel när vi laddade innehållet. Vänligen uppdatera sidan för att fortsätta. Om problemet kvarstår, kontakta vår kundtjänst.