LEE PRECISION
ULTIMATE RIFLE 4-DIE SETS

734307906931 100053454

Choose this die set for maximum versatility. The set features a full length-resizing die to return brass to factory new dimensions, perfect for reloading brass fired in other guns. The Collet Neck sizing die is used on your fire formed brass giving you best possible accuracy. No case lube required and cases last almost forever. The Easy Adjust Dead Length Bullet seating die foolproofs the bullet seating adjustment, and assures perfect seating depth every time. The Factory Crimp die provides a secure crimp on bullets with or without a crimp groove. In most cases it helps accuracy by providing a uniform higher start pressure and gives the finished cartridge Factory like accuracy and dependability. The set is complete, with shell holder, powder measure and famous Lee load data featuring all common brands of powder organized in a easy to read logical format. Includes a full length sizer, collet necksizer, Easy Adjust Dead Length Bullet Seating Die & Factory Crimp Die.

Mer...

Välj detta matrisset för maximal mångsidighet. Setet innehåller en hel längd-återställande matris för att återföra hylsor till fabriksnya dimensioner, perfekt för omladdning av hylsor som avfyrats i andra vapen. Collet Neck-storleksmatrisen används på dina eldformade hylsor och ger dig den bästa möjliga precisionen. Inget hylssmörjmedel krävs och hylsorna håller nästan för evigt. Easy Adjust Dead Length Bullet Seating-matrisen förenklar justering av kulisättningen och säkerställer perfekt sättdjup varje gång. Factory Crimp-matrisen ger en säker crimpare för kulor med eller utan crimp spår. I de flesta fall hjälper det precisionen genom att ge ett enhetligt högre starttryck och ger den färdiga patronen fabrikslik precision och pålitlighet. Setet är komplett, med hylshållare, krutmått och berömda Lee-laddningsdata som innehåller alla vanliga krutmärken organiserade i ett lättläst logiskt format. Inkluderar en full längd-sizer, collet necksizer, Easy Adjust Dead Length Bullet Seating Die & Factory Crimp Die.

Mer...

Kundernas betyg påLEE PRECISION 30-30 WINCHESTER ULTIMATE 4-DIE SET

Antal betyg: 5
Från brownells.com: 5
Medelbetyg: 4,2

Secure Package Better (2016-10-12)

The dies were out of their box and rolling around loose in the package. Lee is quality, but I was disappointed to find my brand new dies in a loose pile.

Okay (2016-05-17)

The dies are okay. My concern is that on the full resize die, the pin keeps sliding out of the collet no matter how tight it is, it falls apart. If it was a thread type, it would stay in position. The other dies seem to be operating as intended.

Lee Prcision 4-Die set advantages (2017-03-09)

Most of the Lee sets do not always include the Factory Crimp die. This is why I opted for the 4 die set. The included shell holder is not something you get with RCBS and other Die sets. Since I use a Universal De-priming die for almost every case, the pin in the full length re-sizing die is the first thing to go. I still need to use a Small base resizing die set for brass fired in other rifles. I reload for both an M1A and a DPMS Recon G2. For 7.62x51 and .308 this set is all you need for new brass . Once fired brass might need both the Lee set and an additional SB resizing die to cover all of your needs. I have Lee die sets for many rifle and pistol calibers... as well as Hornady and RCBS and others. Reliable and accurate for my needs.

Sub-Moa in a Savage model 10 (2017-09-11)

All of my brass has been once fired through my rifle only, so I primarily use the neck sizing die only and full length size only if the brass gets to tight to chamber. First reloads with these dies produced accurate and repeatable results, and all groups were between 1-2". After testing with different charge weights, powder, and seating depth groups dropped down to a consistent sub-moa groups. avg around 3/4.

Great Die Set, With Caveats. (2015-06-30)

I have all Lee die sets and these are right up there in quality. While the info is all there in the description I'd just like to reiterate a few points to the prospective buyer.

This set has two sizing die, full length and collet. When I saw the four die set I jumped to the "they finally included the die for all four holes in my turret press, including factory crimp and charging die!" conclusion. No. If you want to use the Auto-Disk you must still buy the charging die. I didn't remember that from my .300 BLK die set.

These are not carbide. The wording in the description is a little ambiguous but the "no lube required" claim is ONLY for the collet die. Still, that claim seems to be what sticks in the reader's mind. I have seen this mistake in reviews and even in talking with a Brownells product rep. I even called Lee to double check as the instructions talk about lubing the cases. Since others made this mistake, too, I don't feel so badly that I did.

All in all, this set is for the precision loader so if you do not have a bolt action .223 you should save the difference and get the three die set. I'll be keeping this set since I do have an FN .223 bolt action and might someday want to reload the brass that came out of it to a little higher spec than my AR loads.

Just be aware of your needs before buying this set. Great stuff, though, as always from Lee Precision.

Läs 5 fler betyg på brownells.com

895 1049 14 SEK

Produktnr: 100053454
LEE PRECISION 30-30 WINCHESTER ULTIMATE 4-DIE SET
Tillverkarens produktnummer: 90693 734307906931 Välj detta matrisset för maximal mångsidighet. Setet innehåller en hel längd-återställande matris för att återföra hylsor till fabriksnya dimensioner, perfekt för omladdning av hylsor som avfyrats i andra vapen. Collet Neck-storleksmatrisen används på dina eldformade hylsor och ger dig den bästa möjliga precisionen. Inget hylssmörjmedel krävs och hylsorna håller nästan för evigt. Easy Adjust Dead Length Bullet Seating-matrisen förenklar justering av kulisättningen och säkerställer perfekt sättdjup varje gång. Factory Crimp-matrisen ger en säker crimpare för kulor med eller utan crimp spår. I de flesta fall hjälper det precisionen genom att ge ett enhetligt högre starttryck och ger den färdiga patronen fabrikslik precision och pålitlighet. Setet är komplett, med hylshållare, krutmått och berömda Lee-laddningsdata som innehåller alla vanliga krutmärken organiserade i ett lättläst logiskt format. Inkluderar en full längd-sizer, collet necksizer, Easy Adjust Dead Length Bullet Seating Die & Factory Crimp Die.

1049 SEK 2 1 049,00 kr *

Levernastid ca. 14-21 dagar.
2 st. i centrallagret.

Funktioner: Laddverktyg: Laddverktyg (Komplett) Patron: 30-30 Winchester

LEE PRECISION ULTIMATE RIFLE 4-DIE SETS

Kundernas betyg påLEE PRECISION 30-30 WINCHESTER ULTIMATE 4-DIE SET

Top takeaways

Produktinformation

Produkt detaljer

Kundernas betyg påLEE PRECISION 30-30 WINCHESTER ULTIMATE 4-DIE SET

Anslut

Säkra betalningsmetoder

Branschorganisationer

Välkommen till oss!

LEE PRECISION
ULTIMATE RIFLE 4-DIE SETS