These machined aluminum split pliers are designed to loosen Redding dies when screwed into the press. These pliers fit the die body lock ring, which frequently is in a jammed fit with the die and the top of the reloading press. The smaller hole fits the smaller knurled lock nut on top of the reloading die that locks down the decapping assembly. The contoured fit of these pliers prevents the damage we routinely see on lock rings from handloaders using adjustable pliers.
Mer...
Dessa maskinbearbetade aluminiumsplittÄng Àr designade för att lossa Redding-matriser nÀr de Àr inskruvade i pressen. TÄngen passar lÄsringskroppen pÄ matrisen, som ofta sitter fastklÀmd mellan matrisen och toppen av omtryckningspressen. Det mindre hÄlet passar den mindre rÀfflade lÄsmuttern pÄ toppen av omtryckningsmatrisen som lÄser fast avstötarmontaget. Den konturerade passformen pÄ dessa tÄng förhindrar den skada vi rutinmÀssigt ser pÄ lÄsringar frÄn handladdare som anvÀnder justerbara tÀnger.
Mer...
Kundernas betyg pÄSINCLAIR INTERNATIONAL REDDING DIE LOCK RING PLIERS
Antal betyg: 8
FrÄn brownells.com: 8
Medelbetyg: 3,8
worth the cost(2013-07-25)
These are well worth the cost. I paid for premium Sinclair rings so I didn't want to mess them up. This easily releases a die from the press. And we all know how they can really tighten up during a long reloading session.
Better off with Channel Lock Pliers(2011-02-26)
I purchased these pliers a few years ago because I wanted something that would fit the lock ring on my Redding dies. They worked great for the first year or so but now I am unable to snug the lock ring because the point of contact has worn out. The aluminum alloy used to manufacture these pliers is too soft. That's why they wear out so fast. Save your money for channel lock pliers.
Was waiting for a tool just like this.(2011-03-10)
Work's perfict,would buy another. I wish they would make one for early RCBS die's.
works great with Redding dies(2011-03-27)
great with Redding dies, but not with RCBS
Why did I wait so long to buy this(2011-03-29)
I used it for the first time as I set my 375 H&H dies up for the first time . Finally I no longer need pliers or vise grips . If you don't purchase this item you'll be sorry . It really works .
TTOM768 Judging: Redding Die Tool(2012-02-14)
Pros:
ĂŻÂÂ Useful Design for Redding Only ĂŻÂÂ Right Equipment for Correctly Set-Up with Redding Dies ĂŻÂÂ Compact & not over bulky
Comments: It is correct tool; rather than, pliers. If you purchase it will extend the life of your equipment; as well as, make your reloading correct if you are using Redding products: be professional guys. I would recommend this to all Redding customers.
Concerns, Advice, & Cons:
ĂŻÂÂ Useful Design However, it boggles my mind the other Manufactures do not follow suit ĂŻÂÂ I Believe Sinclair should design a similar multi-purpose tool to handle Redding, RCBS, & Hornady: this would eliminate the Q&A for other die makers while making the only existing tool available. It could be a kit. This would sell !!!!!!!!
half good(2012-11-14)
Works great on the large bottom ring of the die, but doesn't work at all on the small top ring of die. The plier handles close against each other before the pliers can grip the top ring of the die. Should have made the top hole on the pliers a tad bit smaller. These are Redding dies I'm trying to tighten, no other brand.
Not Very Progressive (2017-08-22)
I watched the video and thought they would work for some reason. They don't fit after the first die is set up on a Dillon 650 using Redding comp dies. Of course I should have seen it but just loved the idea too much to look deeper into it. Well back to the small Channel Lock pliers. Maybe I can sell the two pair I bought to someone who uses a single die set up?
Produktnr: 749002629 SINCLAIR INTERNATIONAL REDDING DIE LOCK RING PLIERS Tillverkarens produktnummer: 52900 Dessa maskinbearbetade aluminiumsplittÄng Àr designade för att lossa Redding-matriser nÀr de Àr inskruvade i pressen. TÄngen passar lÄsringskroppen pÄ matrisen, som ofta sitter fastklÀmd mellan matrisen och toppen av omtryckningspressen. Det mindre hÄlet passar den mindre rÀfflade lÄsmuttern pÄ toppen av omtryckningsmatrisen som lÄser fast avstötarmontaget. Den konturerade passformen pÄ dessa tÄng förhindrar den skada vi rutinmÀssigt ser pÄ lÄsringar frÄn handladdare som anvÀnder justerbara tÀnger.
259SEK15259,00 kr
*
Levernastid ca. 14-21 dagar. Mer Àn 10 st. i centrallagret.
Maskinbearbetade aluminiumsplittÄng designade för att lossa Redding-matriser nÀr de Àr inskruvade i pressen.
Passar lÄsringskroppen och den mindre rÀfflade lÄsmuttern pÄ toppen av omtryckningsmatrisen.
Konturerad passform förhindrar skador pÄ lÄsringar vid anvÀndning av justerbara tÀnger.
Produktinformation
Stil:
Die Lock Rings/Wrenches
Leveransvikt: 0,068kgLeveranshöjd: 13mmLeveransbredd: 53mmLeveranslÀngd: 157mm
Produkt detaljer
Tillverkas i USA
Produktnr: 749009918 SINCLAIR INTERNATIONAL HORNADY/LEE PRECISION LOCK RING WRENCH Dessa maskinbearbetade aluminiumsplittÄng Àr designade för att lossa Redding-matriser nÀr de Àr inskruvade i pressen. TÄngen passar lÄsringskroppen pÄ matrisen, som ofta sitter fastklÀmd mellan matrisen och toppen av omtryckningspressen. Det mindre hÄlet passar den mindre rÀfflade lÄsmuttern pÄ toppen av omtryckningsmatrisen som lÄser fast avstötarmontaget. Den konturerade passformen pÄ dessa tÄng förhindrar den skada vi rutinmÀssigt ser pÄ lÄsringar frÄn handladdare som anvÀnder justerbara tÀnger.
389SEK2389,00 kr
*
Levernastid ca. 14-21 dagar. 2 st. i centrallagret.
Dessa aluminiumsplittÄng Àr designade för att lossa Redding-matriser nÀr de Àr inskruvade i pressen.
Passar lÄsringskroppen pÄ matrisen och den mindre rÀfflade lÄsmuttern pÄ toppen av omtryckningsmatrisen.
Förhindrar skada pÄ lÄsringar som ofta uppstÄr nÀr justerbara tÀnger anvÀnds.
Produktinformation
Stil:
Die Lock Rings/Wrenches
Leveransvikt: 0,045kgLeveranshöjd: 8mmLeveransbredd: 66mmLeveranslÀngd: 157mm
Produkt detaljer
Tillverkas i USA
Produktnr: 749011546 SINCLAIR INTERNATIONAL SINCLAIR LOCK RING PLIERS Dessa maskinbearbetade aluminiumsplittÄng Àr designade för att lossa Redding-matriser nÀr de Àr inskruvade i pressen. TÄngen passar lÄsringskroppen pÄ matrisen, som ofta sitter fastklÀmd mellan matrisen och toppen av omtryckningspressen. Det mindre hÄlet passar den mindre rÀfflade lÄsmuttern pÄ toppen av omtryckningsmatrisen som lÄser fast avstötarmontaget. Den konturerade passformen pÄ dessa tÄng förhindrar den skada vi rutinmÀssigt ser pÄ lÄsringar frÄn handladdare som anvÀnder justerbara tÀnger.
649SEK2649,00 kr
*
Levernastid ca. 14-21 dagar. 2 st. i centrallagret.
These machined aluminum split pliers are designed to loosen Redding dies when screwed into the press. These pliers fit the die body lock ring, which frequently is in a jammed fit with the die and the top of the reloading press. The smaller hole fits the smaller knurled lock nut on top of the reloading die that locks down the decapping assembly. The contoured fit of these pliers prevents the damage we routinely see on lock rings from handloaders using adjustable pliers.
Mer...
Dessa maskinbearbetade aluminiumsplittÄng Àr designade för att lossa Redding-matriser nÀr de Àr inskruvade i pressen. TÄngen passar lÄsringskroppen pÄ matrisen, som ofta sitter fastklÀmd mellan matrisen och toppen av omtryckningspressen. Det mindre hÄlet passar den mindre rÀfflade lÄsmuttern pÄ toppen av omtryckningsmatrisen som lÄser fast avstötarmontaget. Den konturerade passformen pÄ dessa tÄng förhindrar den skada vi rutinmÀssigt ser pÄ lÄsringar frÄn handladdare som anvÀnder justerbara tÀnger.
Mer...
Kundernas betyg pÄSINCLAIR INTERNATIONAL REDDING DIE LOCK RING PLIERS
Antal betyg: 8
FrÄn brownells.com: 8
Medelbetyg: 3,8
worth the cost(2013-07-25)
These are well worth the cost. I paid for premium Sinclair rings so I didn't want to mess them up. This easily releases a die from the press. And we all know how they can really tighten up during a long reloading session.
Better off with Channel Lock Pliers(2011-02-26)
I purchased these pliers a few years ago because I wanted something that would fit the lock ring on my Redding dies. They worked great for the first year or so but now I am unable to snug the lock ring because the point of contact has worn out. The aluminum alloy used to manufacture these pliers is too soft. That's why they wear out so fast. Save your money for channel lock pliers.
Was waiting for a tool just like this.(2011-03-10)
Work's perfict,would buy another. I wish they would make one for early RCBS die's.
works great with Redding dies(2011-03-27)
great with Redding dies, but not with RCBS
Why did I wait so long to buy this(2011-03-29)
I used it for the first time as I set my 375 H&H dies up for the first time . Finally I no longer need pliers or vise grips . If you don't purchase this item you'll be sorry . It really works .
TTOM768 Judging: Redding Die Tool(2012-02-14)
Pros:
ĂŻÂÂ Useful Design for Redding Only ĂŻÂÂ Right Equipment for Correctly Set-Up with Redding Dies ĂŻÂÂ Compact & not over bulky
Comments: It is correct tool; rather than, pliers. If you purchase it will extend the life of your equipment; as well as, make your reloading correct if you are using Redding products: be professional guys. I would recommend this to all Redding customers.
Concerns, Advice, & Cons:
ĂŻÂÂ Useful Design However, it boggles my mind the other Manufactures do not follow suit ĂŻÂÂ I Believe Sinclair should design a similar multi-purpose tool to handle Redding, RCBS, & Hornady: this would eliminate the Q&A for other die makers while making the only existing tool available. It could be a kit. This would sell !!!!!!!!
half good(2012-11-14)
Works great on the large bottom ring of the die, but doesn't work at all on the small top ring of die. The plier handles close against each other before the pliers can grip the top ring of the die. Should have made the top hole on the pliers a tad bit smaller. These are Redding dies I'm trying to tighten, no other brand.
Not Very Progressive (2017-08-22)
I watched the video and thought they would work for some reason. They don't fit after the first die is set up on a Dillon 650 using Redding comp dies. Of course I should have seen it but just loved the idea too much to look deeper into it. Well back to the small Channel Lock pliers. Maybe I can sell the two pair I bought to someone who uses a single die set up?