Varukorgen är tom.

Varukorg

Hjälp och kontakt

Fri frakt på beställningar över 2.999 kr

100 dagars returrätt

Nyhetsbrev

REA

Över 300 000 kunder - vi säger tack!

4,93/5 "Mycket bra" (1400+ recensioner)

40 000+ produkter inom jakt och skytte

SINCLAIR INTERNATIONAL
SINCLAIR CASE MOUTH DEBURRING TOOL HOLDER

749002628

Remove burrs from your cases efficiently with the Sinclair Deburring Tool Holder and your case mouth deburring tool. Use in a drill or power screwdriver to quickly debur your case mouths. The stainless steel holder will work with L.E. Wilson deburring tools, current Forster deburring tools. The Sinclair Deburring Tool Holder and the L.E. Wilson Case Mouth Deburring Tool are available together in a package that saves you 15 percent versus purchasing them seperately (05-150).

Mer...

Avlägsna graderna från dina hylsor effektivt med Sinclair Deburring Tool Holder och ditt verktyg för avgradning av hylsmynningar. Använd i en borrmaskin eller kraftskruvdragare för att snabbt avgradera dina hylsmynningar. Detta rostfria stålverktyg är kompatibelt med avgradningsverktyg från L.E. Wilson, samt nuvarande avgradningsverktyg från Forster. Sinclair Deburring Tool Holder och L.E. Wilson Case Mouth Deburring Tool finns tillgängliga tillsammans i ett paket som sparar dig 15 procent jämfört med att köpa dem separat (05-150).

Mer...

Kundernas betyg påSINCLAIR INTERNATIONAL SINCLAIR CASE MOUTH DEBURRING TOOL HOLDER

Antal betyg: 8
Från brownells.com: 8
Medelbetyg: 4

Works great with Sinclair power center (2013-02-19)

Nice tool. Chucking it up in the Sinclair power center made for the nicest deburring session I've ever had. Darn near effortless.

Do need to keep an eye on how long you hold the case in there with it under power.

Wrong dimensions (2015-05-05)

Holder will only accept chamfer end of L.E. Wilson tool which measures .621. The deburring end of the Wilson tool measures

.6235 and will not enter the holder.

Excellent tool (2016-03-11)

This is great combo. The Wilson deburr tool is very nicely made and sharp. The holder is also really nicely made, with unusually good attention to detail.

Thanks, Sinclair, for offering a unique product.

needed some fitting (2011-12-19)

The description says that the RCBS tool will fit, but my RCBS case mouth chamfer/deburr tool didn't quite fit in this adapter. I chucked the RCBS tool in my drill by the pin on the outside deburring end and spun it while using sandpaper on the tool. This got me pretty close, but it was still a little too tight and required pliers to switch tool ends. I ended up using a fine grit sanding drum on my rotary tool inside the Sinclair adapter to smooth the inside out just a little bit and now it's easy to remove the RCBS tool to switch ends, but still has a snug fit. If it had've fit this good out of the box, it would've gotten 5 stars, but the fitting was a bit annoying. I'd probably still buy again.

AN UNBIASED TOOL REVIEW (2014-01-07)

SUPER NICE & WELL MADE TOOL TO HOLD YOUR DEBURRING TOOL FOR SPINNING WITH A DRILL. HOWEVER, IT WILL NOT EASILY FIT THE "RCBS" DEBURRING TOOL. THE "ID" OF THE HOLDER WILL HAVE TO BE ENLARGED OR THE "OD" OF THE DEBURRING TOOL REDUCED A FEW THOUSANDTHS TO ACHIEVE A PROPER FIT. ANOTHER OPTION WOULD BE TO SIMPLY ORDER A "WILSON" DEBURRING TOOL IF YOU DO NOT ALREADY OWN ONE.

Perfect!! (2015-08-19)

Not sure why some people give it 2 stars when they're trying to use the wrong deburring tool inside... It's made for the Wilson deburring tool, and fits 100% perfectly, and works GREAT!!!

One of the best tools I've ever bought (2016-12-03)

Deburring and chamfering were my least favorite operations of case prep. Now they're a breeze. Just make sure you follow the recommendation an use a Wilson chamfering tool, which I already had. I used to get the worst hand cramps when I would twist the chamfering tool by hand. This holder eliminates that and is much faster to boot! I have mine inserted into my B&D cordless screwdriver, but a drill works too. I just wish I had purchased one of these years ago.

Just what I was looking for! (2018-07-14)

I purchased this item to use with my L.E. Wilson inside/outside 45 degree chamfer tool. It works like it was made for it, which of course it was! There are chamfer tools with a round shaft that will work in a drill press, but the gun sites don't seem to carry them any more. This adapter allows you to do that with the combo tool.

I use it to chamfer the throat of the chamber on black powder reproduction/replica guns cylinders. Makes for easy starting the round balls, and less lead shaving. Brownells also sells a 45 degree brass lapping tool that does have the drill press stem. Use this with their lapping compound to get a smooth finish. See picture.

<img width="500" src='/userdocs/reviewimages/d73f62e7-53a2-4082-a17c-3a19a8e9823b.jpg' alt=''>

<img width="500" src='/userdocs/reviewimages/abadad29-5295-4b2d-b9cd-b014cd0478a6.jpg' alt=''>

<img width="500" src='/userdocs/reviewimages/8d0d7a87-0f01-448c-a5db-857db700ff9e.jpg' alt=''>

<img width="500" src='/userdocs/reviewimages/cd9f8a9c-221c-463b-b2d8-9de3bd132a99.jpg' alt=''>

<img width="500" src='/userdocs/reviewimages/374ff11e-4de2-4e47-a8b5-9ed2f2992c65.jpg' alt=''>

Läs 8 fler betyg på brownells.com

329 849 2 SEK

Produktnr: 749002628
SINCLAIR INTERNATIONAL SINCLAIR CASE MOUTH DEBURRING TOOL HOLDER Avlägsna graderna från dina hylsor effektivt med Sinclair Deburring Tool Holder och ditt verktyg för avgradning av hylsmynningar. Använd i en borrmaskin eller kraftskruvdragare för att snabbt avgradera dina hylsmynningar. Detta rostfria stålverktyg är kompatibelt med avgradningsverktyg från L.E. Wilson, samt nuvarande avgradningsverktyg från Forster. Sinclair Deburring Tool Holder och L.E. Wilson Case Mouth Deburring Tool finns tillgängliga tillsammans i ett paket som sparar dig 15 procent jämfört med att köpa dem separat (05-150).

329 SEK 5 329,00 kr *

Levernastid ca. 14-21 dagar.
5 st. i centrallagret.

Lägg till i inköpslista

Fråga om produkt

Information

Lägg till i inköpslista

Fråga om produkt

Top takeaways

Sinclair Deburring Tool Holder används för att effektivt avlägsna grader från hylsor med hjälp av en borrmaskin eller kraftskruvdragare.
Verktyget är tillverkat av rostfritt stål och är kompatibelt med avgradningsverktyg från L.E. Wilson och Forster.
Sinclair Deburring Tool Holder och L.E. Wilson Case Mouth Deburring Tool kan köpas tillsammans i ett paket som sparar 15 procent jämfört med att köpa dem separat.

Produktinformation

Leveransvikt: 0,086kg Leveranshöjd: 25mm Leveransbredd: 102mm Leveranslängd: 152mm

Produkt detaljer

Tillverkas i USA

Produktnr: 749004354
SINCLAIR INTERNATIONAL L.E. WILSON DEBURRING TOOL WITH HOLDER Avlägsna graderna från dina hylsor effektivt med Sinclair Deburring Tool Holder och ditt verktyg för avgradning av hylsmynningar. Använd i en borrmaskin eller kraftskruvdragare för att snabbt avgradera dina hylsmynningar. Detta rostfria stålverktyg är kompatibelt med avgradningsverktyg från L.E. Wilson, samt nuvarande avgradningsverktyg från Forster. Sinclair Deburring Tool Holder och L.E. Wilson Case Mouth Deburring Tool finns tillgängliga tillsammans i ett paket som sparar dig 15 procent jämfört med att köpa dem separat (05-150).

849 SEK 3 849,00 kr *

Levernastid ca. 14-21 dagar.
3 st. i centrallagret.

Lägg till i inköpslista

Fråga om produkt

Information

Lägg till i inköpslista

Fråga om produkt

Effektivisera avgradningen av hylsmynningar med Sinclair Deburring Tool Holder. 🛠️ Kompatibel med L.E. Wilson och Forster verktyg.

Mer...

Kundernas betyg påSINCLAIR INTERNATIONAL SINCLAIR CASE MOUTH DEBURRING TOOL HOLDER

Antal betyg: 8
Från brownells.com: 8
Medelbetyg: 4

Works great with Sinclair power center (2013-02-19)

Wrong dimensions (2015-05-05)

Holder will only accept chamfer end of L.E. Wilson tool which measures .621. The deburring end of the Wilson tool measures

.6235 and will not enter the holder.

Excellent tool (2016-03-11)

needed some fitting (2011-12-19)

AN UNBIASED TOOL REVIEW (2014-01-07)

Perfect!! (2015-08-19)

Not sure why some people give it 2 stars when they're trying to use the wrong deburring tool inside... It's made for the Wilson deburring tool, and fits 100% perfectly, and works GREAT!!!

One of the best tools I've ever bought (2016-12-03)