Dial Caliper Body for your Modular Headspace Comparator assembly. Now available with 2 mounting configurations: “Centered” for normal use, “Offset” for use with Hornady COAL Tools. ***Body is required to use Bullet and Headspace Inserts*** This is the body only for the Modular Headspace Comparator tool. You must purchase the body for the Modular Headspace Comparator inserts to work. Available in two configurations. Standard: The longest of the two configurations, works with loaded ammunition up to 338 Lapua Magnum with solid turned bullets. Short: The shortest body of the two configurations. More compact when the customer wants to dedicate a body for measuring fired brass or bullets only. Made from 6061 Aluminum made in the U.S.A. these bodies clamp onto your dial calibers allowing the Headspace and Bullet inserts to be changed quickly with the use of any tools. Both Standard and Short Modular Headspace Comparator Bodies have two clamping configurations when mounting to your dial calipers. Configuration “C”: Centered With the 10/32 Thumb Screw mounted on the bottom side with a “C” means that the Modular Headspace Comparator Body will be centered on the dial calipers. This is standard for all normal uses. Configuration “O”: Offset With the 10/32 Thumb Screw mounted on the bottom side with a “O” means that the Modular Headspace Comparator Body will be offset on the dial calipers. When using the Hornady COAL measuring tools, the Modular Headspace Comparator body must be offset on the dial calipers in order for the Hornady tool to be properly aligned with the Modular Headspace Comparator assembly.
Dial Caliper Body för din modulära headspace comparator-uppsättning. Nu tillgänglig med 2 monteringskonfigurationer: "Centered" för normal användning, "Offset" för användning med Hornady COAL-verktyg. ***Kroppen krävs för att använda bullet- och headspace-insatser*** Detta är endast kroppen för det modulära headspace comparator-verktyget. Du måste köpa kroppen för att insatserna för den modulära headspace comparator ska fungera. Finns i två konfigurationer. Standard: Den längsta av de två konfigurationerna, fungerar med laddad ammunition upp till 338 Lapua Magnum med solida svängda kulor. Kort: Den kortaste kroppen av de två konfigurationerna. Mer kompakt när kunden vill dedikera en kropp för att mäta avfyrad mässing eller endast kulor. Tillverkad av 6061 aluminium tillverkat i USA, dessa kroppar kläms fast på dina dial calipers vilket möjliggör att headspace- och bullet-insatser kan bytas snabbt utan behov av verktyg. Både standard- och korta modulära headspace comparator-kroppar har två klämskonfigurationer när de monteras på dina dial calipers. Konfiguration "C": Centrerad Med 10/32 tumskruven monterad på undersidan med ett "C" betyder att den modulära headspace comparator-kroppen kommer att vara centrerad på dial calipers. Detta är standard för all normal användning. Konfiguration "O": Offset Med 10/32 tumskruven monterad på undersidan med ett "O" betyder att den modulära headspace comparator-kroppen kommer att vara offset på dial calipers. När du använder Hornady COAL-mätningsverktyg måste den modulära headspace comparator-kroppen vara offset på dial calipers för att Hornady-verktyget ska vara korrekt justerat med den modulära headspace comparator-uppsättningen.