Uppgradera din Savage Accuttrigger med Timneys justerbara avtryckare! ⚙️ Precision och kvalitet för bättre skytte. Justerbar dragvikt 1,5-4 pund.
TIMNEYSAVAGE ACCUTRIGGER TRIGGER - TIMNEY SAVAGE ACCUTRIGGER TRIGGER
081950006380883000046
Top takeaways
Timney Featherweight Triggers för Savage Accutriggers erbjuder en skarp och helt justerbar avtryckare med justerbar dragvikt från 1,5 till 4 pund.
Avtryckaren har ett lättviktschassi i legering med maskinbearbetade och härdade stålytor.
Passar Savage Accutrigger-gevär men fungerar inte på Savage A17-gevär och Accutrigger.
Produktinformation
Modell:Universal Gevär
Stil:Adjustable
Vapentyp:Savage Arms
Leveransvikt:0,068kg
Leveranshöjd:14mm
Leveransbredd:80mm
Leveranslängd:108mm
UPC:081950006380
Produkt detaljer
Tillverkas i USA
USA: s exportklassificering: 0A501.c
Specifikationer:
Make: Savage Arms
Modell: Universal Gevär
Stil: Adjustable
314931491SEK
3149SEK3 149 kr
Priser inkl. moms, exkl. frakt
Produktnr: 883000046
Tillv.nr.: 638
081950006380 Timney Featherweight avtryckare för Savage Accutriggers är precisionsbearbetade och handjusterade för att ge ett klart avtryck. De har ett lättviktslegeringshus med bearbetade och härdade stålytor. Avtryckaren är helt justerbar. Avtryckarens dragvikt är justerbar från 1.5 till 4lbs och kan justeras för krängning och överresning. Justerbar dragvikt 1.5-4lbs. Mindre anpassning kan krävas.
Order kan placeras
Restorder. Skickas när den finns i lager. Leveranstid ca 4-12 veckor från centrallagret.
Restorder. Skickas när den finns i lager. Leveranstid ca 4-12 veckor från centrallagret.
The Timney Featherweight Triggers for Savage Accutriggers are precision machined and hand-fitted to provide a crisp trigger pull. They feature a lightweight alloy housing with machined and hardened steel working surfaces. The trigger is fully adjustable. The trigger pull weight is adjustable from 1.5 to 4lbs. and is adjustable for creep and overtravel. Adjustable Pull weight 1.5-4lbs. Minor fitting may be required
SPECS: Fits Savage Accutrigger rifles. Will not work on the Savage A17 rifle and Accutrigger. Adjustable from 1.5-4lbs.
Timney Featherweight avtryckare för Savage Accutriggers är precisionsbearbetade och handjusterade för att ge ett klart avtryck. De har ett lättviktslegeringshus med bearbetade och härdade stålytor. Avtryckaren är helt justerbar. Avtryckarens dragvikt är justerbar från 1.5 till 4lbs och kan justeras för krängning och överresning. Justerbar dragvikt 1.5-4lbs. Mindre anpassning kan krävas.
SPECIFIKATIONER: Passar Savage Accutrigger gevär. Fungerar inte på Savage A17 gevär och Accutrigger. Justerbar från 1.5-4lbs.
Top takeaways
Timney Featherweight Triggers för Savage Accutriggers erbjuder en skarp och helt justerbar avtryckare med justerbar dragvikt från 1,5 till 4 pund.
Avtryckaren har ett lättviktschassi i legering med maskinbearbetade och härdade stålytor.
Passar Savage Accutrigger-gevär men fungerar inte på Savage A17-gevär och Accutrigger.
Produktinformation
Modell:Universal Gevär
Stil:Adjustable
Vapentyp:Savage Arms
Leveransvikt:0,068kg
Leveranshöjd:14mm
Leveransbredd:80mm
Leveranslängd:108mm
UPC:081950006380
Produkt detaljer
Tillverkas i USA
USA: s exportklassificering: 0A501.c
Kundrecensioner
Kundbetyg (4)
4 / 5
Rekommenderar
FITTING REQUIRED 2018-08-26
Plan to do some Dremel work on the stock for clearance. Otherwise easy to install and better than factory. See other reviews.
Rekommenderar med reservationer
Read before you start 2018-05-15
I wish I had read Tom's review before I started. I wound up doing all the same things to get around obstacles in the stock, but I sure could have saved some time if didn't have to figure out the problems for myself. I rated the trigger accordingly. I think Timney could have done a little research and prevented the problems. Shorter adjustment screws, angle the front of the trigger on the trigger guard side to avoid the bolt release, etc.
Rekommenderar
Better than Factory 2018-02-05
I had trouble adjusting my Timney Trigger 638 in my Savage 16 LWH (with Accutrigger). The firing pin would release when I closed the bolt. I fixed it by screwing the sear screw out to a half turn from firing-pin-release instead of the 1/6 turn as instructed. Also, I screwed the safety setscrew in until I felt resistance, then I backed it out by 1/4 turns until the safety started working correctly.
I also modified the rear trigger guard screw mounting boss molded into the Savageâs stock to allow adjustment of the trigger pull force with the barrel and trigger mounted to the stock. I took about 1/8â off the top of the boss to clear the trigger pull force adjustment screw.
There was interference between the Timney trigger and the top of the Savage trigger guard, keeping the pull force from being consistent. I removed the Timney trigger and ground clearance on the bottom front corner of the Timney trigger and shortened the sear screw by 0.050â allowing it to be a little below flush (and not interfere) when correctly adjusted, and polished the business end of the setscrew. All now works well, including a consistent pull force of 1.2 pounds. Much better than the factory trigger.
Rekommenderar varmt
Don't wait buy one! 2013-02-08
Installed this trigger in a Savage Lightweight Hunter. It required a little dremel work inside the stock to allow full trigger travel. This was done were the rear of the trigger sits. The difference between this trigger and the factory trigger was night and day. Make sure you follow the directions on the adjustment of this trigger to prevent an unsafe condition. Be sure to test it many times before loading. It's more than worth the money and pretty easy to install. I would definitely buy another if I had another accutrigger rifle.
Uppgradera din Savage Accuttrigger med Timneys justerbara avtryckare! ⚙️ Precision och kvalitet för bättre skytte. Justerbar dragvikt 1,5-4 pund.
Destination Control Statement: Dessa poster styrs av USA: s regering och godkänns endast för export till det land där den slutliga destinationen används av den slutliga mottagaren eller slutanvändaren som identifierats här. De får inte vidareförsäljas, överföras eller på annat sätt kasseras till något annat land eller någon annan än den godkända slutliga mottagaren eller slutanvändaren, antingen i sin ursprungliga form eller efter att ha monterats i andra föremål utan att först få godkännande från den amerikanska regeringen eller som annars är tillåten enligt amerikansk lag och förordningar.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Destination Control Statement: Dessa poster styrs av USA: s regering och godkänns endast för export till det land där den slutliga destinationen används av den slutliga mottagaren eller slutanvändaren som identifierats här. De får inte vidareförsäljas, överföras eller på annat sätt kasseras till något annat land eller någon annan än den godkända slutliga mottagaren eller slutanvändaren, antingen i sin ursprungliga form eller efter att ha monterats i andra föremål utan att först få godkännande från den amerikanska regeringen eller som annars är tillåten enligt amerikansk lag och förordningar.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.