Varukorgen är tom.

Varukorg

Hjälp och kontakt

Fri frakt på beställningar över 2.999 kr

100 dagars returrätt

Nyhetsbrev

REA

Över 300 000 kunder - vi säger tack!

4,93/5 "Mycket bra" (1400+ recensioner)

40 000+ produkter inom jakt och skytte

VOLQUARTSEN
RUGER® MARK II™/ MARK III™ VOLTHANE PISTOL GRIPS

810162011574 930000047

Hand-Filling Target Grips

Large, contoured, bottom-swell heelrest and wide, upswept thumb-rest straighten and extend the wrist for a relaxed, steadier hold and more reliable accuracy. Wedge-shaped grip area (wide in the rear, narrow in front) and evenly spaced finger grooves match the natural shape of the hand. Flexible, synthetic rubber construction with impressed checking ensures secure, no-slip one- or two-hand hold. Available for Ruger® Mark II™ (also fits Mark I with “A-100” frame) and Mark III™ pistols.

SPECS: Thermo-molded Volthane rubber, black. Approx. 3¼" (8.2cm) wide at base, 4¼" (10.7cm) high, 5.2 oz. (147 g). Right-hand (RH) and left-hand (LH). Includes Allen head screws and wrench. Mark II - One-piece design fits Ruger Mark II and Mark I with “A-100” marked frame. Mark III - Two-piece design fits Ruger Mark III only. Does not have silver medallion as shown in photo.

Mer...

Handfyllande Målgrepp

Stort, konturerat, svällande hälstöd och bred, uppåtsvept tumstöd rätar ut och förlänger handleden för ett avslappnat, stadigare grepp och mer tillförlitlig precision. Kilkonstruerat greppområde (brett bak, smalt fram) och jämnt fördelade fingerfårar matchar handens naturliga form. Flexibel, syntetisk gummi konstruktion med intryckt checkering säkerställer ett säkert, halkfritt grepp med en eller två händer. Finns tillgänglig för Ruger® Mark II™ (passar även Mark I med ramen “A-100”) och Mark III™ pistoler.

SPECIFIKATIONER: Termoformat Volthane-gummi, svart. Ungefärligt 3¼" (8.2cm) brett vid basen, 4¼" (10.7cm) högt, 5.2 oz. (147 g). Högerhand (RH) och vänsterhand (LH). Inkluderar Allen-skruvar och nyckel. Mark II - Enstyckskonstruktion passar Ruger Mark II och Mark I med ram märkt “A-100”. Mark III - Tvåstyckskonstruktion passar enbart Ruger Mark III. Har inte silvermedaljong som visas på bilden.

Mer...

Kundernas betyg påVOLQUARTSEN RH VOLTHANE GRIPS, MARK III

Antal betyg: 6
Från brownells.com: 6
Medelbetyg: 4

Great Grip Set (2012-03-16)

This is my third set. They fit my hand very well. The grip comes with the extended bolt release lever and has an extended magazine button on the grip. Just a good practical target grip.

A Bit Disappointed... (2012-06-04)

They feel great, no doubt, but I was disappointed to find that they really didn't fit my Mark III well. The center seams don't come together and I am left with a 1/16" gap under either my fingers or palm. You expect some amount of warping with a rubber/plastic piece and things my not align precisely, but not being able to fit around the frame is just unacceptable to me. Also, I would like to have had it stated up front that you will need to remove the hammer pin in order to install the (thankfully provided) larger slide lock lever.

Well worth the money (2012-06-29)

Very comfortable even in a long bullseye session. Makes the mkiii an easier to shoot pistol.

Improve my bullseye score, however... (2013-04-05)

I have been shooting Rugers for over 30 years, but because of the factory grips that never agreed with my hand, I never used them for competition. I put the volthane grips, along with the Volquartsen accurzing trigger kit, on a Mark III, and I have now found my new competition gun. Love them. However, as someone else mentioned you will have to pull the hammer pin to install the extended slide release. There are plenty of youtube videos out there to show you how to remove and replace all these parts if you don't know how, so not too big of an issue. My big complaints â the mounting screws are too long and counter sunk into the rubber grips too deap. There is very little rubber left to tighten the screws, and they will/do interfere with the clip.(requires modifying) The worst thing: The sear pin sits in a void cut in the grip. If this pin wiggles out the thickness of the frame, the sear will shift and make the gun a paper weight until corrected (requires modifying or take your chances). Nothing I would care to do at the range. The factory frames actually have a raised area to prevent this pin from moving. I personally like the grips enough to make the modifications, but a bit surprised/disappointed coming from Volquartsen.

Improved handling and groups (2010-12-26)

I first saw these grips on a MKII at local gunshow. The fit and feel was so nice I asked dealer where he got the $100 grips. He told me Brownells had em at under $50.00. I bought a set and installed on MKII, these grips shrunk my groups by 30%+ right off the bat, one or two hand shooting. The fit and feel really made a big difference improving steady/solid handling of my Ruger. If your buying for right handed MKIII better to order 930-000-047 so you get the mag release extenstion.
Thanks to VOLQUARTSEN and BROWNELLS.

Great grip wit fit for Bullseye Shooting (2012-01-26)

The grip made a great improvement in my Timed & Rapid fire scores. Grip fits well in my hand and the extended mag release button works perfect. Grip was a little smooth so I added gritty tread pad tape to the fingers, thumb, and heal area of the grip to give it an abrasive feel. The grip now gives me much more control and doesn't slide in my hand.

Läs 6 fler betyg på brownells.com

1099 1099 1 SEK

Produktnr: 930000047
VOLQUARTSEN RH VOLTHANE GRIPS, MARK III
Tillverkarens produktnummer: VCRG-3 810162011574 Stort, konturerat, svällande hälstöd och bred, uppåtsvept tumstöd rätar ut och förlänger handleden för ett avslappnat, stadigare grepp och mer tillförlitlig precision. Kilkonstruerat greppområde (brett bak, smalt fram) och jämnt fördelade fingerfårar matchar handens naturliga form. Flexibel, syntetisk gummi konstruktion med intryckt checkering säkerställer ett säkert, halkfritt grepp med en eller två händer. Finns tillgänglig för Ruger® Mark II™ (passar även Mark I med ramen “A-100”) och Mark III™ pistoler.

1099 SEK 0 1 099,00 kr *

Restorder. Skickas när den finns i lager. Leveranstid ca 4-12 veckor från centrallagret.

Funktioner: Färg: Svart Make: Ruger Material: Rubber Modell: Mark III Stil: Finger Groove Ytskikt: Checkered

Lägg till i inköpslista

Fråga om produkt

Information

Lägg till i inköpslista

Fråga om produkt

Top takeaways

Ergonomiskt utformade grepp med konturerat hälstöd och tumstöd för bättre precision och komfort.
Flexibelt Volthane-gummi med intryckt checkering för ett säkert, halkfritt grepp.
Passar Ruger® Mark II™ (inklusive Mark I med "A-100" ram) och Mark III™ pistoler, med specifika konstruktioner för varje modell.

Produktinformation

Färg: Svart Make: Ruger Material: Rubber Modell: Mark III Stil: Finger Groove Ytskikt: Checkered Leveransvikt: 0,204kg Leveranshöjd: 58mm Leveransbredd: 117mm Leveranslängd: 183mm UPC : 810162011574

Produkt detaljer

Tillverkas i USA
USA: s exportklassificering: 0A501.y.1

Uppgradera din Ruger® Mark II™/III™ med VOLQUARTSEN Volthane grips! 💪 Flexibelt grepp för bättre precision och komfort. Beställ nu!

Hand-Filling Target Grips

Mer...

Handfyllande Målgrepp

Mer...

Kundernas betyg påVOLQUARTSEN RH VOLTHANE GRIPS, MARK III

Antal betyg: 6
Från brownells.com: 6
Medelbetyg: 4

Great Grip Set (2012-03-16)

This is my third set. They fit my hand very well. The grip comes with the extended bolt release lever and has an extended magazine button on the grip. Just a good practical target grip.

A Bit Disappointed... (2012-06-04)