A full-length sizing die is designed to resize the entire length of the cartridge case, not just the neck. Unlike neck-sizing dies, which only resize the neck portion, full-length sizing dies are versatile and suitable for any rifle chambered in the same cartridge. When you fire a cartridge, the brass case expands to fit the chamber of your rifle. After firing, the case contracts slightly, but it may not return to its original dimensions. The full-length sizing die restores the case to the correct dimensions by resizing both the neck and body. It also removes any bulges or irregularities caused during firing. Setting up a full-length sizing die involves several steps: Clean the outside of the fired cases with alcohol and a cloth. Zero out the calipers using a headspace comparator and a fired case. Install the full-length sizing die and adjust it gradually until the case shoulder is bumped back by 0.001 inch. Lock the die and lubricate the cases before sizing them. Check the shoulder bump every 10 cases or so and adjust the die if needed. Avoid overworking the brass to prevent case head separation.
Mer...
35936920SEK
Produktnr: 430109157 LEE PRECISION 7MM REMINGTON MAGNUM FULL LENGTH SIZING DIE ONLY Tillverkarens produktnummer: 91064734307910648
359SEK4359,00 kr
*
Levernastid ca. 14-21 dagar. 4 st. i centrallagret.
Funktioner:Laddverktyg: Full Length Sizing DiePatron: 7 mm Remington Magnum
Laddverktygstyp:
Full Length Sizing Die
Patron:
7 mm Remington Magnum
Leveransvikt: 0,193kgLeveranshöjd: 38mmLeveransbredd: 41mmLeveranslängd: 124mm
UPC
: 734307910648
Produkt detaljer
Tillverkas i USA
Produktnr: 430109138 LEE PRECISION .223 REMINGTON FULL LENGTH SIZING DIE ONLY Tillverkarens produktnummer: 91035734307910358
359SEK1359,00 kr
*
Levernastid ca. 14-21 dagar. 1 st. i centrallagret.
Funktioner:Laddverktyg: Full Length Sizing DiePatron: 223 Remington
A full-length sizing die is designed to resize the entire length of the cartridge case, not just the neck. Unlike neck-sizing dies, which only resize the neck portion, full-length sizing dies are versatile and suitable for any rifle chambered in the same cartridge. When you fire a cartridge, the brass case expands to fit the chamber of your rifle. After firing, the case contracts slightly, but it may not return to its original dimensions. The full-length sizing die restores the case to the correct dimensions by resizing both the neck and body. It also removes any bulges or irregularities caused during firing. Setting up a full-length sizing die involves several steps: Clean the outside of the fired cases with alcohol and a cloth. Zero out the calipers using a headspace comparator and a fired case. Install the full-length sizing die and adjust it gradually until the case shoulder is bumped back by 0.001 inch. Lock the die and lubricate the cases before sizing them. Check the shoulder bump every 10 cases or so and adjust the die if needed. Avoid overworking the brass to prevent case head separation.