Precision-made sights for rifles, both with and without ramp bases. The blade is gracefully contoured, sloping toward the front. Made of steel and nicely blued to look good on any gun. GLOW SIGHTS: Two colors - Orange or Green .060" dia. optic rod. RAMP MOUNTED - .340 wide base.
SPECS: Steel, blue, polished finish. .620" (15mm) long. ORDERING: Select the sight height required using the Marbles and/or Williams charts and determine which Sight Style, Bead Type and Width is needed from the info above. Using the chart beside this copy, find the correct Marbles Sight and note the 9 digit Ordering No. For example: If you need a Contoured Ramp Front Sight, “MR” width, .290" (7.4mm) high, with a 1/16" (1.6mm) gold bead, follow the Height listing to the .290" figure, read across on the “MR” line to the 1/16" gold bead and note the number: 579-502-911. 1" = (2.54cm)
Mer...
Precisionstillverkade sikten för gevär, både med och utan rampbaser. Klingen är elegant konturerad och lutar mot framsidan. Tillverkad av stål och snyggt blånerad för att se bra ut på vilket vapen som helst. GLOW SIGHTS: Två färger - Orange eller Grön .060" dia. optisk stav. RAMP MOUNTED - .340 bred bas.
SPECS: Stål, blå, polerad yta. .620" (15mm) lång. BESTÄLLNING: Välj den önskade sikteshöjden genom att använda Marbles och/eller Williams diagram och bestäm vilken siktesstil, pärltyp och bredd som behövs från informationen ovan. Använd diagrammet bredvid denna text för att hitta rätt Marbles sikte och notera det 9-siffriga beställningsnumret. Till exempel: Om du behöver ett konturerat rampmonterat kornsikte, “MR” bredd, .290" (7.4mm) högt, med en 1/16" (1.6mm) guldpärla, följ höjdlistningen till .290" siffran, läs tvärs över på “MR”-linjen till 1/16" guldpärlan och notera numret: 579-502-911. 1" = (2.54cm)
Mer...
Kundernas betyg påMARBLE ARMS .410" FIBER OPTIC GLOW 41-W FRONT SIGHT STEEL GREEN
Antal betyg: 3
Från brownells.com: 3
Medelbetyg: 2
Requires too much work to install(2015-10-12)
Replaced a Williams fiber optic front post with one from Marble
and I should have stayed with Williams. Even after filing numerous times the marble F.O. front post was extremely hard to install - if you file too much off you're screwed, so you end up
trying to fit it over and over again, filing a bit more each time. the Williams fiber optic front posts fit perfectly the first time you try. Save yourself a lot of grief and just by the Williams product.
Fitting needed, remove fiber to install(2017-09-15)
Yes, this sight has a base that is wider than most slots--I think the base on mine measured around .392". Would be a real advantage in an older, well-used rifle if its dovetail was "relieved" at some point; however, it's a (small) hassle to fit on a new gun (Henry Big Boy for me). A grinding wheel--a small Dremel grinding wheel works--might speed up the process over a file, but go slow and check
Even when you've got the base tapered so you can get it started well, you'll still have to pound to get it centered; well, at least it won't come loose! Remove the fiber-optic pipe before doing so (the pipe has only two supports, and so is more easy to snap as you pound the sight), and replace it (presses in) when you're done.
Very pleased with the final result: handsome and very bright.
Trapper warning(2009-12-19)
If you have a Winchester 94 Trapper, these fiber optic sights will not fit. They don't clear the front barrel band. I tried one and, after a lot of filing and fitting, the little metal tubes holding the fiber optic piece broke off, indicating that the construction isn't strong enough for the application. They don't fit and they're too delicate. Brownell's needs better application info. I've had good luck with Marble's gold/white dot sights on this gun. Still had to do some filing though.
Produktnr: 579204136 MARBLE ARMS .410" FIBER OPTIC GLOW 41-W FRONT SIGHT STEEL GREEN Tillverkarens produktnummer: 204136871373002706 Precisionstillverkade sikten för gevär, både med och utan rampbaser. Klingen är elegant konturerad och lutar mot framsidan. Tillverkad av stål och snyggt blånerad för att se bra ut på vilket vapen som helst. GLOW SIGHTS: Två färger - Orange eller Grön .060" dia. optisk stav. RAMP MOUNTED - .340 bred bas.
349SEK4349,00 kr
*
Levernastid ca. 14-21 dagar. 4 st. i centrallagret.
Brownells Sverige AB
Box 99
793 22 Leksand
Sverige
info@brownells.se
Produktnr: 579204135 MARBLE ARMS .410" FIBER OPTIC GLOW 41-W FRONT SIGHT STEEL ORANGE Tillverkarens produktnummer: 204135871373002690 Precisionstillverkade sikten för gevär, både med och utan rampbaser. Klingen är elegant konturerad och lutar mot framsidan. Tillverkad av stål och snyggt blånerad för att se bra ut på vilket vapen som helst. GLOW SIGHTS: Två färger - Orange eller Grön .060" dia. optisk stav. RAMP MOUNTED - .340 bred bas.
459SEK5459,00 kr
*
Levernastid ca. 14-21 dagar. 5 st. i centrallagret.
Precision-made sights for rifles, both with and without ramp bases. The blade is gracefully contoured, sloping toward the front. Made of steel and nicely blued to look good on any gun. GLOW SIGHTS: Two colors - Orange or Green .060" dia. optic rod. RAMP MOUNTED - .340 wide base.
SPECS: Steel, blue, polished finish. .620" (15mm) long. ORDERING: Select the sight height required using the Marbles and/or Williams charts and determine which Sight Style, Bead Type and Width is needed from the info above. Using the chart beside this copy, find the correct Marbles Sight and note the 9 digit Ordering No. For example: If you need a Contoured Ramp Front Sight, “MR” width, .290" (7.4mm) high, with a 1/16" (1.6mm) gold bead, follow the Height listing to the .290" figure, read across on the “MR” line to the 1/16" gold bead and note the number: 579-502-911. 1" = (2.54cm)
Mer...
Precisionstillverkade sikten för gevär, både med och utan rampbaser. Klingen är elegant konturerad och lutar mot framsidan. Tillverkad av stål och snyggt blånerad för att se bra ut på vilket vapen som helst. GLOW SIGHTS: Två färger - Orange eller Grön .060" dia. optisk stav. RAMP MOUNTED - .340 bred bas.
SPECS: Stål, blå, polerad yta. .620" (15mm) lång. BESTÄLLNING: Välj den önskade sikteshöjden genom att använda Marbles och/eller Williams diagram och bestäm vilken siktesstil, pärltyp och bredd som behövs från informationen ovan. Använd diagrammet bredvid denna text för att hitta rätt Marbles sikte och notera det 9-siffriga beställningsnumret. Till exempel: Om du behöver ett konturerat rampmonterat kornsikte, “MR” bredd, .290" (7.4mm) högt, med en 1/16" (1.6mm) guldpärla, följ höjdlistningen till .290" siffran, läs tvärs över på “MR”-linjen till 1/16" guldpärlan och notera numret: 579-502-911. 1" = (2.54cm)
Mer...
Kundernas betyg påMARBLE ARMS .410" FIBER OPTIC GLOW 41-W FRONT SIGHT STEEL GREEN
Antal betyg: 3
Från brownells.com: 3
Medelbetyg: 2
Requires too much work to install(2015-10-12)
Replaced a Williams fiber optic front post with one from Marble
and I should have stayed with Williams. Even after filing numerous times the marble F.O. front post was extremely hard to install - if you file too much off you're screwed, so you end up
trying to fit it over and over again, filing a bit more each time. the Williams fiber optic front posts fit perfectly the first time you try. Save yourself a lot of grief and just by the Williams product.
Fitting needed, remove fiber to install(2017-09-15)
Yes, this sight has a base that is wider than most slots--I think the base on mine measured around .392". Would be a real advantage in an older, well-used rifle if its dovetail was "relieved" at some point; however, it's a (small) hassle to fit on a new gun (Henry Big Boy for me). A grinding wheel--a small Dremel grinding wheel works--might speed up the process over a file, but go slow and check
Even when you've got the base tapered so you can get it started well, you'll still have to pound to get it centered; well, at least it won't come loose! Remove the fiber-optic pipe before doing so (the pipe has only two supports, and so is more easy to snap as you pound the sight), and replace it (presses in) when you're done.
Very pleased with the final result: handsome and very bright.
Trapper warning(2009-12-19)
If you have a Winchester 94 Trapper, these fiber optic sights will not fit. They don't clear the front barrel band. I tried one and, after a lot of filing and fitting, the little metal tubes holding the fiber optic piece broke off, indicating that the construction isn't strong enough for the application. They don't fit and they're too delicate. Brownell's needs better application info. I've had good luck with Marble's gold/white dot sights on this gun. Still had to do some filing though.