Varukorgen är tom.

Varukorg

Hjälp och kontakt

Fri frakt på beställningar över 2.999 kr

100 dagars returrätt

Nyhetsbrev

REA

Över 300 000 kunder - vi säger tack!

4,93/5 "Mycket bra" (1400+ recensioner)

40 000+ produkter inom jakt och skytte

MAGPUL
QUICK DETACH AMBIDEXTROUS RECEIVER END PLATE

873750011844 100015153

Wide Pivot Range Allows Easy Transitions From Primary To Secondary Shoulders

Ambidextrous Sling Attachment Point for quick-detach swivels adds a centrally located socket at the rear of the receiver. More than 180° of sling movement enables both left- and right-handed shooters to quickly shift their weapon between shoulders, plus the mount cup is angled slightly downward for greater freedom of motion and to create a finished look. Low-profile design includes rounded edges that minimize snagging. Constructed from durable, case-hardened, precision-cast steel with a Melonite™ finish for extreme resistance to wear and corrosion. To install, remove the standard AR-15/M4 carbine stock receiver end plate and slide on the ASAP-QD. Works with one-point type slings with push-button QD connectors, like Magpul's MS4® Dual QD GEN 2 Sling, as well as the MS1® Multi-Mission Sling with a QD loop assembled on back. Slings sold separately.

SPECS: Steel, Melonite, matte black. Fits mil- and commercial-spec carbine receiver extensions (buffer tubes). Not compatible with A1/A2 fixed stocks or similarly mounted stock such as Magpul PRS, UBR, and MOE rifle stocks. Installation instructions included.

Mer...

Brett svängningsomfång möjliggör enkla övergångar från primär till sekundär axel

Ambidextert fästpunkt för snabbkopplingsbyglar lägger till en centralt placerad kontakt vid bakre delen av mottagaren. Mer än 180° rörelseomfång för bygeln möjliggör för både vänster- och högerskyttar att snabbt flytta sitt vapen mellan axlarna, plus att monteringskoppen är vinklad något nedåt för större rörelsefrihet och för att skapa en slutfinish. Lågprofil-designen inkluderar rundade kanter som minimerar risken för fasthakning. Tillverkad av hållbart, härdad, precisionsgjuten stål med en Melonite™-finish för extremt motstånd mot slitage och korrosion. För att installera, ta bort den standard AR-15/M4 karbinmottagarens slutplatta och sätt på ASAP-QD. Fungerar med enpunktsbyglar med tryckknapps-QD-kontakter, som Magpuls MS4® Dual QD GEN 2 Sling, samt MS1® Multi-Mission Sling med en QD-loop monterad på baksidan. Byglar säljs separat.

SPECS: Stål, Melonite, mattsvart. Passar både mil-spec och kommersiella karbinmottagarens förlängningar (buffer tubes). Inte kompatibel med A1/A2 fasta kolvfästen eller liknande monterade kolvtyper såsom Magpul PRS, UBR och MOE gevärskolvar. Monteringsinstruktioner ingår.

Mer...

Kundernas betyg påMAGPUL ASAP QD AMBIDEXTROUS SLING ATTACHMENT POINT BLACK

Antal betyg: 7
Från brownells.com: 7
Medelbetyg: 3,9

Needs more ergonomic refinement (2014-07-24)

The position of the QD mechanism and sling interferes with the grip. The sling gets in position that gets in the way of the web of the hand and the grip. It will be very difficult to establish a grip with a MOE or similar due to the angle of the grip. A K2 or similar works a lot better but still when the sling is under tension it presses downwards against the web of the hand. Also, when the sling tension relaxes it falls behind the grip and in a hurry its difficult to get out of the way. This needs to be located at the side. This experience was using an MS4 sling and both the MOE and K2 grips.

Works fine (2014-07-30)

Have a similar set up with a different brand. Saw Magpul's and threw it on another AR. Works fine. I do think the Magpuls look a bit nicer and the edges are more round. So, more ergonomic. This set up is one of many different single point sling options for your AR. For the one star reviewer, he's giving the product one star because he doesn't like the set up, not because the Magpul sling mount is bad. I have a box full of different mounts, furniture and various parts that have ended up there after 20 years of tweaking my AR's. Doesn't mean the things in the box are bad quality, just that I ended up not liking them on my AR's.

Magpul comes through again! (2014-08-06)

There are many end plate QD sling mounts out there lately, but Magpul raised the bar with the angled QD socket, rounded edges, and Melonite finish.

works but going back to Noveske (2014-12-14)

It is a nice looking product and works as advertised, however it is IMPOSSIBLE to stake since its made of such hard material, seriously I could not dent it! I ended up destroying my castle nut trying to stake the thing (my fault I know) So I'm removing it and putting the Noveske QD end plate on. If you don't plan on staking your end plate it will be fine and do everything you need it to. Not for me however kinda bummed I wasted $30 on the thing because I do really like magpul products this is the first thing I have disliked.

Excellent QD Plate, 1 Minor Flaw (2015-04-23)

I will start by admitting that I am a Magpul Fanboy. If Magpul made a silverware set, I'd buy 3 of them. I really do like this QD End Plate, but it is slightly flawed (In My Opinion, more on that in a minute).

Quick bit of info: I am building a custom lower and I am using a Spike's 6 position buffer tube, Magpul CTR Mil-Spec Stock, and the Magpul MS4 QD Sling. I added the Magpul ASAP-QD in place of my original Noveske QD Endplate.

With the Noveske Plate (which is as minimalist as you can get) will allow the CTR stock to close on the 1st buffer tube position (stock totally collapsed). It pushes all the way against the push button QD, but it will close and lock into place (it closes and locks the QD against the stock, will not come loose *See Attached Picture, picked from Google not my Image*).

The new Magpul ASAP-QD will NOT allow the CTR stock to collapse completely (position 1). It gets very close, but with the angle of the QD Socket has in addition to the added depth of the unit (for strength I assume?) the stock will not collapse totally.

I emailed Magpul with this information, and I was informed this is a "Side Effect" of using the CTR with the ASAP-QD and nothing can really be done about it. A bit of an oversight by them in my opinion.

Now, all that being said, it is not an issue for me. I do not shoot my gun with the stock totally collapsed. I think the ASAP-QD is a very nice addition to your gun. Just be aware of your stock choices, as it might not close entirely.

The finish on the ASAP-QD is flawless, its super hard steel as another reviewer has noted (though I don't believe it was 2 star worthy). I would not hesitate to buy another, I would just go with a different stock next time.

Hope this helped someone,

<img width="500" src='/userdocs/reviewimages/ed8193d1-c43d-493a-907d-9e6569dc20bb.jpg' alt=''>

Works great (2016-06-30)

Works as advertised, rock solid. Used on a DDI stamped ak-47, with a rifle dynamics m4 stock adapter, a voltor buffer tube, and a DMPS castle nut

Nice QD Sling Mount (2018-08-27)

Install was quick & easy - If you don't have AR tools consider castle nut removal before purchasing. Works well for sling connection point, may not have purchased this if my adjustable stock had a QD mount integrated. Part is solid, QD connects easily and zero issues when in use. Would purchase again.

Läs 7 fler betyg på brownells.com

499 499 1 SEK

Produktnr: 100015153
MAGPUL ASAP QD AMBIDEXTROUS SLING ATTACHMENT POINT BLACK
Tillverkarens produktnummer: MAG529-BLK 873750011844 Ambidextert fästpunkt för snabbkopplingsbyglar lägger till en centralt placerad kontakt vid bakre delen av mottagaren. Mer än 180° rörelseomfång för bygeln möjliggör för både vänster- och högerskyttar att snabbt flytta sitt vapen mellan axlarna, plus att monteringskoppen är vinklad något nedåt för större rörelsefrihet och för att skapa en slutfinish. Lågprofil-designen inkluderar rundade kanter som minimerar risken för fasthakning. Tillverkad av hållbart, härdad, precisionsgjuten stål med en Melonite™-finish för extremt motstånd mot slitage och korrosion. För att installera, ta bort den standard AR-15/M4 karbinmottagarens slutplatta och sätt på ASAP-QD. Fungerar med enpunktsbyglar med tryckknapps-QD-kontakter, som Magpuls MS4® Dual QD GEN 2 Sling, samt MS1® Multi-Mission Sling med en QD-loop monterad på baksidan. Byglar säljs separat.

499 SEK 446 499,00 kr *

Leveranstid ca. 4-10 dagar.
Mer än 10 st. i lager i Europa.

Funktioner: Färg: Svart Material: Stål Stil: Rifle Sling Adapter

Lägg till i inköpslista

Fråga om produkt

Information

Lägg till i inköpslista

Fråga om produkt

Top takeaways

Ambidexter fästpunkt med 180° rörelseomfång för snabbkopplingsbyglar, kompatibel med både vänster- och högerskyttar.
Tillverkad av hållbart, härdat stål med Melonite™-finish för extremt motstånd mot slitage och korrosion.
Passar mil-spec och kommersiella karbinmottagarens förlängningar, ej kompatibel med A1/A2 fasta kolvfästen eller liknande.

Produktinformation

Färg: Svart Material: Stål Stil: Rifle Sling Adapter Leveransvikt: 0,023kg Leveranshöjd: 25mm Leveransbredd: 102mm Leveranslängd: 171mm UPC : 873750011844