Tough, Combat-Tested Grips With Built-In Utility Features
Quick-release, dual locking bars provide a rock-solid mounting interface to Mil-Std 1913 rails. Large diameter, ribbed grip helps prevent hand fatigue and cramping during long periods in the ready position. Oversized storage compartment is large enough for spare batteries or parts, including a complete M4/M16 bolt assembly. O-ring on cap forms a waterproof seal down to 66 ft. deep. Remove side filler panel to mount a light/laser remote pressure switch in the integral switch pocket.
SPECS: Resin polymer, black or dark earth. 4¾" (12.1cm) long.
Mer...
TÄliga, stridstestade grepp med inbyggda anvÀndbara funktioner
SnabbkopplingsfÀstet med dubbla lÄsbara stag ger en stensÀker monteringsyta till Mil-Std 1913 rÀls. Greppet med stort diameter och ribbor hjÀlper till att förhindra trötthet och kramp i handen under lÄnga perioder i beredskapsposition. Det överdimensionerade förvaringsutrymmet Àr tillrÀckligt stort för reservbatterier eller delar, inklusive en komplett M4/M16 bultsamling. O-ringen pÄ locket skapar en vattentÀt försegling ner till 20 meter djup. Ta bort sidopanelen för att montera en fjÀrrströmbrytare för ljus/laser i det integrerade switchfacket.
SPECS: Hartsplastpolymer, svart eller mörk jord. 4¾" (12.1cm) lĂ„ng.
Mer...
Kundernas betyg pÄTANGODOWN PICATINNY STANDARD VERTICAL GRIP POLYMER DARK EARTH
Antal betyg: 6
FrÄn brownells.com: 6
Medelbetyg: 3,7
"Too much whiz and not enough bang"(2010-01-16)
Def. not a bang for my [$], doesnt benefit from spring locks and when I called the company they said might be my rail, "not really" I mount all different kinds of forend grips no prob, I think the spring lock design is the problem. Def gonna use my 30 dollar polymer grip over this one, rock solid with that one.
Good product, but tough to put on(2010-01-25)
I recently purchased the BGV-MK46 battle grip and put it on my patrol rifle. So far it has been great other than the fact it was quite difficult to install, but once I got it in place there is absolutely no movement. It is in fact rock solid. Might have gone with the quick release model instead for ease of installing / removal and its ability to adjust to different sized rails if you're not sure if your rails are Mil-Std 1913 or not.
awesome grip(2010-02-02)
This grip is solid, very nicely made. It is somewhat difficult to get on but definitely doable by yourself, and to get it off by yourself is really difficult in all honesty. Flimsy? No freaking way!!!!!!!!! If you're looking to mount it and leave it, this is great. If for some odd reason you want to take it on and off, get the qd model.
Solid but bulky(2010-08-18)
This grip can be tough to install unless you use the zipties to hold down the locking bars. Once on, it is very sturdy and could take a beating. It is however one of the larger grips on the market and hangs down quite low. The switch pocket will only fit older style surefire switches so make sure your switch will fit. Overall feels nice, but may be a little overkill for an AR15, and the limited switch fitment is frustrating.
dont like it(2012-08-02)
thing is huge and very wobbly once mounted. oh its solid and rugged but it has a ton of play on the rail. do not like the mounting system at all
Rock solid grip; worth every penny(2016-01-20)
After reading some of the mixed reviews,I was questioning whether or not I wanted to buy this grip. I took a chance and can't be happier with the grip. Well made and was able to install by myself onto a 4" section of Samson Evolution Rail. Tango Down also now provides "grip chips" to help in pulling down the tabs while installing the grip. Once mounted, the locking tabs popped into the rail grooves and I had ZERO movement or wiggle on my rail. Anyone that has Samson rails and was curious about this grip; it has a very snug fit.
Produktnr: 071000038 TANGODOWN PICATINNY STANDARD VERTICAL GRIP POLYMER DARK EARTH Tillverkarens produktnummer: BGV-MK46 FDE855727000303 SnabbkopplingsfÀstet med dubbla lÄsbara stag ger en stensÀker monteringsyta till Mil-Std 1913 rÀls. Greppet med stort diameter och ribbor hjÀlper till att förhindra trötthet och kramp i handen under lÄnga perioder i beredskapsposition. Det överdimensionerade förvaringsutrymmet Àr tillrÀckligt stort för reservbatterier eller delar, inklusive en komplett M4/M16 bultsamling. O-ringen pÄ locket skapar en vattentÀt försegling ner till 20 meter djup. Ta bort sidopanelen för att montera en fjÀrrströmbrytare för ljus/laser i det integrerade switchfacket.
1699SEK91 699,00 kr
*
Levernastid ca. 14-21 dagar. 9 st. i centrallagret.
SnabbkopplingsfÀste med dubbla lÄsbara stag ger en sÀker montering pÄ Mil-Std 1913 rÀls.
Ăverdimensionerat förvaringsutrymme för reservbatterier eller delar, inklusive en komplett M4/M16 bultsamling, med vattentĂ€t försegling ner till 20 meter.
Integrerat switchfack för montering av fjÀrrströmbrytare för ljus/laser.
Tillverkas i USA
USA: s exportklassificering: 0A501.y.1
Destination Control Statement: Dessa poster styrs av USA: s regering och godkÀnns endast för export till det land dÀr den slutliga destinationen anvÀnds av den slutliga mottagaren eller slutanvÀndaren som identifierats hÀr. De fÄr inte vidareförsÀljas, överföras eller pÄ annat sÀtt kasseras till nÄgot annat land eller nÄgon annan Àn den godkÀnda slutliga mottagaren eller slutanvÀndaren, antingen i sin ursprungliga form eller efter att ha monterats i andra föremÄl utan att först fÄ godkÀnnande frÄn den amerikanska regeringen eller som annars Àr tillÄten enligt amerikansk lag och förordningar.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Produktnr: 071000034 TANGODOWN PICATINNY STANDARD VERTICAL GRIP POLYMER BLACK Tillverkarens produktnummer: BGV-MK46 BLK855727000129 SnabbkopplingsfÀstet med dubbla lÄsbara stag ger en stensÀker monteringsyta till Mil-Std 1913 rÀls. Greppet med stort diameter och ribbor hjÀlper till att förhindra trötthet och kramp i handen under lÄnga perioder i beredskapsposition. Det överdimensionerade förvaringsutrymmet Àr tillrÀckligt stort för reservbatterier eller delar, inklusive en komplett M4/M16 bultsamling. O-ringen pÄ locket skapar en vattentÀt försegling ner till 20 meter djup. Ta bort sidopanelen för att montera en fjÀrrströmbrytare för ljus/laser i det integrerade switchfacket.
1649SEK81 649,00 kr
*
Levernastid ca. 14-21 dagar. 8 st. i centrallagret.
Tough, Combat-Tested Grips With Built-In Utility Features
Quick-release, dual locking bars provide a rock-solid mounting interface to Mil-Std 1913 rails. Large diameter, ribbed grip helps prevent hand fatigue and cramping during long periods in the ready position. Oversized storage compartment is large enough for spare batteries or parts, including a complete M4/M16 bolt assembly. O-ring on cap forms a waterproof seal down to 66 ft. deep. Remove side filler panel to mount a light/laser remote pressure switch in the integral switch pocket.
SPECS: Resin polymer, black or dark earth. 4¾" (12.1cm) long.
Mer...
TÄliga, stridstestade grepp med inbyggda anvÀndbara funktioner
SnabbkopplingsfÀstet med dubbla lÄsbara stag ger en stensÀker monteringsyta till Mil-Std 1913 rÀls. Greppet med stort diameter och ribbor hjÀlper till att förhindra trötthet och kramp i handen under lÄnga perioder i beredskapsposition. Det överdimensionerade förvaringsutrymmet Àr tillrÀckligt stort för reservbatterier eller delar, inklusive en komplett M4/M16 bultsamling. O-ringen pÄ locket skapar en vattentÀt försegling ner till 20 meter djup. Ta bort sidopanelen för att montera en fjÀrrströmbrytare för ljus/laser i det integrerade switchfacket.
SPECS: Hartsplastpolymer, svart eller mörk jord. 4¾" (12.1cm) lĂ„ng.
Mer...
Kundernas betyg pÄTANGODOWN PICATINNY STANDARD VERTICAL GRIP POLYMER DARK EARTH
Antal betyg: 6
FrÄn brownells.com: 6
Medelbetyg: 3,7
"Too much whiz and not enough bang"(2010-01-16)
Def. not a bang for my [$], doesnt benefit from spring locks and when I called the company they said might be my rail, "not really" I mount all different kinds of forend grips no prob, I think the spring lock design is the problem. Def gonna use my 30 dollar polymer grip over this one, rock solid with that one.
Good product, but tough to put on(2010-01-25)
I recently purchased the BGV-MK46 battle grip and put it on my patrol rifle. So far it has been great other than the fact it was quite difficult to install, but once I got it in place there is absolutely no movement. It is in fact rock solid. Might have gone with the quick release model instead for ease of installing / removal and its ability to adjust to different sized rails if you're not sure if your rails are Mil-Std 1913 or not.
awesome grip(2010-02-02)
This grip is solid, very nicely made. It is somewhat difficult to get on but definitely doable by yourself, and to get it off by yourself is really difficult in all honesty. Flimsy? No freaking way!!!!!!!!! If you're looking to mount it and leave it, this is great. If for some odd reason you want to take it on and off, get the qd model.
Solid but bulky(2010-08-18)
This grip can be tough to install unless you use the zipties to hold down the locking bars. Once on, it is very sturdy and could take a beating. It is however one of the larger grips on the market and hangs down quite low. The switch pocket will only fit older style surefire switches so make sure your switch will fit. Overall feels nice, but may be a little overkill for an AR15, and the limited switch fitment is frustrating.
dont like it(2012-08-02)
thing is huge and very wobbly once mounted. oh its solid and rugged but it has a ton of play on the rail. do not like the mounting system at all
Rock solid grip; worth every penny(2016-01-20)
After reading some of the mixed reviews,I was questioning whether or not I wanted to buy this grip. I took a chance and can't be happier with the grip. Well made and was able to install by myself onto a 4" section of Samson Evolution Rail. Tango Down also now provides "grip chips" to help in pulling down the tabs while installing the grip. Once mounted, the locking tabs popped into the rail grooves and I had ZERO movement or wiggle on my rail. Anyone that has Samson rails and was curious about this grip; it has a very snug fit.