Low profile mount clamps directly to the barrel for added stability. Positioned below the line of sight - no need to use a raised cheekpiece for proper hold. MIL STD 1913 Picatinny rail. No gunsmithing, drop-in installation.
SPECS: 7075-T6 aluminum, Mil-Spec hardcoat anodized, matte black finish. Includes mounting screws and illustrated instructions. Mini-14 - 103⁄8" (26.4cm) long. Fits Standard and Ranch rifles. Fits rifles with pre-580 serial number prefix. Mini Thirty - Fits all Mini Thirty rifles manufactured before 2008 with factory original barrel. M4S model - must be used with tip-on optic/rings. Fits Mini-14’s made since circa 2008. Also fits Mini-30’s, from early production to present. Will not fit models with target barrels.
Mer...
Använd Järnsikte & Optiskt Sikte Utan Omkonfiguration
Lågprofilsfäste som kläms fast direkt på pipan för ökad stabilitet. Positionerad under siktlingslinjen - inget behov av att använda en förhöjd kindstöd för korrekt grepp. MIL STD 1913 Picatinny-skena. Ingen borsmithjälp, installationen är enkel.
SPECIFIKATIONER: 7075-T6 aluminium, Mil-Spec hårdanodiserad, mattsvart finish. Inkluderar monteringsskruvar och illustrerade instruktioner. Mini-14 - 103⁄8" (26.4cm) lång. Passar Standard och Ranch gevär. Passar gevär med serienummerprefix före 580. Mini Thirty - Passar alla Mini Thirty gevär tillverkade före 2008 med fabriksoriginal pipa. M4S-modellen - måste användas med tip-on optik/ringar. Passar Mini-14:or tillverkade sedan cirka 2008. Passar också Mini-30:or, från tidig produktion till nutid. Passar inte modeller med tävlingspipor.
Mer...
Kundernas betyg påULTIMAK MINI-30® SCOUT MOUNT
Antal betyg: 5
Från brownells.com: 5
Medelbetyg: 5
Nice rail(2016-12-12)
I purchased one of these about a year ago for my series 583. The M4S fits Ruger mini 14s with the newer tapered barrel. Makes the rifle look slick. I mounted a UTG slim riser on top of it and added a vortex strikefire 2 red dot. With this setup I can still use the iron sights and the red dot at the same time. Installation takes a little time. You have to remove the factory gas block Allen key screws that are a bear to get loose. Just take your time with these. If you strip one then you are out of luck. The M4S rail clamps around the bottom of the barrel also. The screws are fairly small that go into the barrel clamp. Don't forget to add a drop of blue thread lock when you re-install all the screws. Overall this rail looks awesome and is functional. No complaints here. Well worth the money.
The mount fit the rifle perfectly, and allowed a red dot optic to be mounted close to the barrel. Well worth buying for the Ruger Mini series of rifles.
excellent quality product(2010-02-21)
very well made product. excellent for optics mounting. Looks like a part of the rifle, not a part on the rifle! Only negative to me is the ultimak name engraved on one side but thats just my taste.
Does not fit late model Mini-14s(2011-11-17)
Bought this to mount on my Mini-14 that I purchased in 2009. The handguard does not fit around the thicker tapered barrel found on newer Minis. Other than that, installation would have been pretty simple, and the quality of the machining is outstanding.
Great buy(2012-07-18)
183 series dropped straight in, snug fit, IMMEDIATE improovement in accuracy, combined with the hogue stock I went from 5 inch groupings to consistant 2-3 inch groupings at 100 metres. NOT MOA but greatly improoved . Will now consider using the mini 14 for hunting.
Produktnr: 100002790 ULTIMAK MINI-30® SCOUT MOUNT Tillverkarens produktnummer: M5-B Lågprofilsfäste som kläms fast direkt på pipan för ökad stabilitet. Positionerad under siktlingslinjen - inget behov av att använda en förhöjd kindstöd för korrekt grepp. MIL STD 1913 Picatinny-skena. Ingen borsmithjälp, installationen är enkel.
Produktnr: 100000960 ULTIMAK MINI-14® SCOUT MOUNT Tillverkarens produktnummer: M4-B Lågprofilsfäste som kläms fast direkt på pipan för ökad stabilitet. Positionerad under siktlingslinjen - inget behov av att använda en förhöjd kindstöd för korrekt grepp. MIL STD 1913 Picatinny-skena. Ingen borsmithjälp, installationen är enkel.
2949SEK02 949,00 kr
*
Restorder. Skickas när den finns i lager. Leveranstid ca 4-12 veckor från centrallagret.
Produktnr: 100009314 ULTIMAK M4S® FORWARD OPTIC MOUNT FOR 2008 OR LATER Tillverkarens produktnummer: M4-S Lågprofilsfäste som kläms fast direkt på pipan för ökad stabilitet. Positionerad under siktlingslinjen - inget behov av att använda en förhöjd kindstöd för korrekt grepp. MIL STD 1913 Picatinny-skena. Ingen borsmithjälp, installationen är enkel.
2949SEK02 949,00 kr
*
Restorder. Skickas när den finns i lager. Leveranstid ca 4-12 veckor från centrallagret.
Low profile mount clamps directly to the barrel for added stability. Positioned below the line of sight - no need to use a raised cheekpiece for proper hold. MIL STD 1913 Picatinny rail. No gunsmithing, drop-in installation.
SPECS: 7075-T6 aluminum, Mil-Spec hardcoat anodized, matte black finish. Includes mounting screws and illustrated instructions. Mini-14 - 103⁄8" (26.4cm) long. Fits Standard and Ranch rifles. Fits rifles with pre-580 serial number prefix. Mini Thirty - Fits all Mini Thirty rifles manufactured before 2008 with factory original barrel. M4S model - must be used with tip-on optic/rings. Fits Mini-14’s made since circa 2008. Also fits Mini-30’s, from early production to present. Will not fit models with target barrels.
Mer...
Använd Järnsikte & Optiskt Sikte Utan Omkonfiguration
Lågprofilsfäste som kläms fast direkt på pipan för ökad stabilitet. Positionerad under siktlingslinjen - inget behov av att använda en förhöjd kindstöd för korrekt grepp. MIL STD 1913 Picatinny-skena. Ingen borsmithjälp, installationen är enkel.
SPECIFIKATIONER: 7075-T6 aluminium, Mil-Spec hårdanodiserad, mattsvart finish. Inkluderar monteringsskruvar och illustrerade instruktioner. Mini-14 - 103⁄8" (26.4cm) lång. Passar Standard och Ranch gevär. Passar gevär med serienummerprefix före 580. Mini Thirty - Passar alla Mini Thirty gevär tillverkade före 2008 med fabriksoriginal pipa. M4S-modellen - måste användas med tip-on optik/ringar. Passar Mini-14:or tillverkade sedan cirka 2008. Passar också Mini-30:or, från tidig produktion till nutid. Passar inte modeller med tävlingspipor.
Mer...
Kundernas betyg påULTIMAK MINI-30® SCOUT MOUNT
Antal betyg: 5
Från brownells.com: 5
Medelbetyg: 5
Nice rail(2016-12-12)
I purchased one of these about a year ago for my series 583. The M4S fits Ruger mini 14s with the newer tapered barrel. Makes the rifle look slick. I mounted a UTG slim riser on top of it and added a vortex strikefire 2 red dot. With this setup I can still use the iron sights and the red dot at the same time. Installation takes a little time. You have to remove the factory gas block Allen key screws that are a bear to get loose. Just take your time with these. If you strip one then you are out of luck. The M4S rail clamps around the bottom of the barrel also. The screws are fairly small that go into the barrel clamp. Don't forget to add a drop of blue thread lock when you re-install all the screws. Overall this rail looks awesome and is functional. No complaints here. Well worth the money.
The mount fit the rifle perfectly, and allowed a red dot optic to be mounted close to the barrel. Well worth buying for the Ruger Mini series of rifles.
excellent quality product(2010-02-21)
very well made product. excellent for optics mounting. Looks like a part of the rifle, not a part on the rifle! Only negative to me is the ultimak name engraved on one side but thats just my taste.
Does not fit late model Mini-14s(2011-11-17)
Bought this to mount on my Mini-14 that I purchased in 2009. The handguard does not fit around the thicker tapered barrel found on newer Minis. Other than that, installation would have been pretty simple, and the quality of the machining is outstanding.
Great buy(2012-07-18)
183 series dropped straight in, snug fit, IMMEDIATE improovement in accuracy, combined with the hogue stock I went from 5 inch groupings to consistant 2-3 inch groupings at 100 metres. NOT MOA but greatly improoved . Will now consider using the mini 14 for hunting.