TALLEY
MAGNUM CROSSBOLT

876430004983 874005000

Strength At Point Of Greatest Stress

Distributes recoil on heavy magnums. Heavy-walled tube goes inside the stock, secures between two bolts with specially designed heads. With sharp, squared edges for clean inletting. Finish to match stock contours.

SPECS: Tube ¼" (6.3mm) dia., 1-3⁄8" (3.5cm) long. Heads 7⁄16" (11.1mm) dia., 1⁄8" (3.2mm) thick. Machined steel, in-the-white.

Mer...

Styrka Vid Största Påfrestningspunkten

Fördelar rekyl på kraftiga magnumvapen. Tjockväggigt rör som placeras inuti kolven, säkras mellan två bultar med speciellt designade huvuden. Med skarpa, kvadratiska kanter för ren inpassning. Avsluta för att matcha konturerna på kolven.

SPECS: Rör ¼" (6,3mm) diam., 1-3⁄8" (3,5cm) långt. Huvuden 7⁄16" (11,1mm) diam., 1⁄8" (3,2mm) tjocka. Maskinbearbetat stål, i grundfärg.

Mer...

Kundernas betyg påTALLEY MAGNUM CROSSBOLT

Antal betyg: 5
Från brownells.com: 5
Medelbetyg: 4

A Little Disappointed (2009-12-28)

I was unable to use the product. I was attempting a stock repair using techniques that I was unfamiliar with, and I thought this product would fill the bill.

The product itself looks to be a pretty good one.

My problem was that I also bought the MAUSER Cross Bolt Wrench, thinking that it would work for this product. I found nothing in the catalogue that explained that this product requires a different tool.

Lesson learned. I recommend adding a comment in the catalog indicating what the correct tool would be for tightening it down, and that the MAUSER Cross Bolt Wrench is intended for MAUSER Cross Bolts ONLY.

Great Value (2010-02-26)

I was pleased with the quality and low cost.
You will need a 1/4" drill, a 7/16" counterbore with 1/4" pilot to machine the stock.
Strongly recommend doing this work in a milling machine.
Did not see a spanner wrench to fit this crossbolt, so I made a simple T-handle spanner out of 7/16" round stock. Drilled the spanner pins at 9/32" (.2812) and made the pins out of .075 pin stock.

Just what I needed! (2010-10-14)

I purchased this product to repace a missing rear crossbolt on a Russian SKS rifle. It's a perfect fit, though I might need to thin the head a little.

As for the proper tool to use, I was able to a the cheap SKS crossbolt tool. They're typically sold by a number of folks, but not Brownells.

great to use (2010-11-24)

Very good product. I have fitted these in cliets stocks. Works just as well as the K98 cross bolts.
Its just a shame they don't do them in stainless steel aswell.
If you havent got the right tool to fit them, then "C" clip pliers work well.

Dandy (2017-06-26)

Several comments regarding lack of a wrench available. This does not use the Mauser wrench. However stop by the auto parts store with a cross bolt and you will find a pair of snap ring pliers work quite well.

Läs 5 fler betyg på brownells.com

199 199 1 SEK

Produktnr: 874005000
TALLEY MAGNUM CROSSBOLT
Tillverkarens produktnummer: CB 876430004983 Fördelar rekyl på kraftiga magnumvapen. Tjockväggigt rör som placeras inuti kolven, säkras mellan två bultar med speciellt designade huvuden. Med skarpa, kvadratiska kanter för ren inpassning. Avsluta för att matcha konturerna på kolven.

199 SEK 53 199,00 kr *