Varukorgen är tom.

Varukorg

Hjälp och kontakt

Fri frakt på beställningar över 2.999 kr

100 dagars returrätt

Nyhetsbrev

REA

Över 300 000 kunder - vi säger tack!

4,93/5 "Mycket bra" (1400+ recensioner)

40 000+ produkter inom jakt och skytte

BROWNELLS
MAGNA-TIP® 1911 AUTO BUSHING DRIVER™ BITS

050806012653 080434045

Supports Bushing For Easiest Removal

Special bits that fit our Magna-Tip® and Clip-Tip handles to correctly center the blade and fully support 1911 grip bushings. Makes removal easier, faster and prevents tearing up the slot. Regular 1911 Bushing Driver Bit removes standard bushings. Slim 1911 Bushing Driver Bit removes the thin bushings used for slim grips.

SPECS: 1-9/16" (3.9cm) overall length, ¼" (6.35mm) O.D.

Mer...

Stöder bussning för enklaste borttagning

Specialbits som passar våra Magna-Tip® och Clip-Tip handtag för att korrekt centrera bladet och fullständigt stödja 1911 greppbussningar. Gör borttagning enklare, snabbare och förhindrar att skåran skadas. Vanlig 1911 Bushing Driver Bit tar bort standardbussningar. Slim 1911 Bushing Driver Bit tar bort de tunna bussningarna som används för smala grepp.

SPECS: 1-9/16" (3.9cm) total längd, ¼" (6.35mm) Y.D.

Mer...

Kundernas betyg påBROWNELLS REGULAR 1911 BUSHING BIT

Antal betyg: 8
Från brownells.com: 8
Medelbetyg: 4,1

not so good (2012-04-22)

the shoulder of this bit does not allow the blade to seat completely with ed brown bushings, resulting in a rounded off slot on the bushing - exactly what this driver is supposed to prevent. Better job with a perfect sized blade tip from a high quality driver set (I used one from [@]).

Slim Bushing Driver Bit Workd Fine (2014-04-14)

The driver works fine. Just remember that it is for a Slim Bushing so make sure the bit is on the bushing which itself which is fairly slim (i.e. thin and shallow) to start with. I think this bit works well with most regular 1911 grip bushings also.

Doesn't work (2015-12-09)

I bought this bit to have the right tool for the job and finally got to use it on a friend's 1911 that had slim grips and bushings he wanted to change out. The blade is recessed too far and doesn't fully reach the slot. I ended up choosing a suitable blade out of my Wheeler kit like I usually do. Might be able to modify with a file.

Excellent tool for the job (2011-11-17)

This tools ability to center the bushing and stay in the slot is wonderful. Before I bought the tool I used a screwdriver and schmucked the bushing.

Works Great (2012-07-07)

Works great when the bushings on my Series 70 Gold Cup or Series 80 Officers Model need tightening. I have also used it on a Norinco frame without problems.

Great tool (2012-12-08)

I'm glad I found this bushing bit. Makes 1911 grip bushing removal and installation a breeze. I don't know how many grip bushings I've ruined with a flat head screw driver. This tool makes it so easy to remove and install grip bushings!

Must Have - Great Tool (2014-01-02)

I messed up a screw and bushing attempting to install a Pachmayr Finger Groove grip on my Colt Government 38 Super. I ordered a set of the stainless bushings along with matching hex screws.

Taking the advise of one of the reviewers I also ordered one of these grip bushing tools, which made the removal and installation of the new bushings a snap. This tool made the job of removal & installation of the grip bushing a very simple and uneventful task. Just the way we wanted.

The bushings and hex screws looked and functioned so well I removed the three good bushings and used this complete set of bushings and screws. The end result a much better looking 1911 with that stainless steel showing up on the black grip.

I would highly recommend the stainless bushing & hex screws and certainly add one of those bushing tools to your order if you do not have one.

If you can swing it, buy both (2017-09-09)

Though I have used a near perfect fitting screwdriver in the past as the gangster says in "Casino": "Why take a chance"? Have six 1911 frames so I bought both, only finding one that needed the slim bit. Works perfectly with the magna tip driver and engages high enough off the frame so you won't damage it. Well built and probably one of the least expensive specialty tools I've ever purchased.

Läs 8 fler betyg på brownells.com

299 359 2 SEK

Produktnr: 080434045
BROWNELLS REGULAR 1911 BUSHING BIT 050806012653 Specialbits som passar våra Magna-Tip® och Clip-Tip handtag för att korrekt centrera bladet och fullständigt stödja 1911 greppbussningar. Gör borttagning enklare, snabbare och förhindrar att skåran skadas. Vanlig 1911 Bushing Driver Bit tar bort standardbussningar. Slim 1911 Bushing Driver Bit tar bort de tunna bussningarna som används för smala grepp.

359 SEK 49 359,00 kr *

Levernastid ca. 14-21 dagar.
Mer än 10 st. i centrallagret.

Funktioner: Bladdiameter: .315 Bladtjocklek: .040 Stil: Bussning

Lägg till i inköpslista

Fråga om produkt

Information

Lägg till i inköpslista

Fråga om produkt

Top takeaways

Specialbits för Magna-Tip® och Clip-Tip handtag, designade för att korrekt centrera bladet och stödja 1911 greppbussningar.
Vanlig 1911 Bushing Driver Bit tar bort standardbussningar, medan Slim 1911 Bushing Driver Bit tar bort tunna bussningar för smala grepp.
Specifikationer: 1-9/16" (3.9cm) total längd, ¼" (6.35mm) Y.D., bladdiameter .315 och bladtjocklek .040.

Produktinformation

Bladdiameter: .315 Bladtjocklek: .040 Stil: Bussning Leveransvikt: 0,018kg Leveranshöjd: 15mm Leveransbredd: 76mm Leveranslängd: 137mm UPC : 050806012653

Produkt detaljer

Tillverkas i USA

Produktnr: 080134001
BROWNELLS 1911 MAGNA-TIP SLIM BUSHING DRIVER BIT 050806010918 Specialbits som passar våra Magna-Tip® och Clip-Tip handtag för att korrekt centrera bladet och fullständigt stödja 1911 greppbussningar. Gör borttagning enklare, snabbare och förhindrar att skåran skadas. Vanlig 1911 Bushing Driver Bit tar bort standardbussningar. Slim 1911 Bushing Driver Bit tar bort de tunna bussningarna som används för smala grepp.

299 SEK 20 299,00 kr *

Levernastid ca. 14-21 dagar.
Mer än 10 st. i centrallagret.

Funktioner: Bladdiameter: .312 Bladtjocklek: .045 Stil: Bussning

Lägg till i inköpslista

Fråga om produkt

Information

Lägg till i inköpslista

Fråga om produkt

Upptäck MAGNA-TIP® 1911 AUTO BUSHING DRIVER™ BITS! 🛠️ Perfekt för att enkelt ta bort 1911 greppbussningar utan skador.

Supports Bushing For Easiest Removal

SPECS: 1-9/16" (3.9cm) overall length, ¼" (6.35mm) O.D.

Mer...

Stöder bussning för enklaste borttagning

SPECS: 1-9/16" (3.9cm) total längd, ¼" (6.35mm) Y.D.

Mer...

Kundernas betyg påBROWNELLS REGULAR 1911 BUSHING BIT

Antal betyg: 8
Från brownells.com: 8
Medelbetyg: 4,1

not so good (2012-04-22)

Slim Bushing Driver Bit Workd Fine (2014-04-14)

Doesn't work (2015-12-09)

Excellent tool for the job (2011-11-17)

This tools ability to center the bushing and stay in the slot is wonderful. Before I bought the tool I used a screwdriver and schmucked the bushing.

Works Great (2012-07-07)

Works great when the bushings on my Series 70 Gold Cup or Series 80 Officers Model need tightening. I have also used it on a Norinco frame without problems.

Great tool (2012-12-08)