Drop-On Recoil & Muzzle Control; Fits Domestic & Chinese M14/M1A's
Lets you spend more time practicing with your favorite high-power, match rifle without the recoil. Absolutely no gunsmithing required for amazing muzzle control and greatly reduced felt recoil even on select-fire rifles. Changes the sharp recoil that most shooters experience with the military stock into a soft push. Easily replaces the issue flash hider without alterations and includes the front sight dovetail and castle nut set screw.
Note: Will NOT fit Norinco/Polytech (M305) with M15x.75 thread.
SPECS: Machined steel, manganese phosphate finish. 3" (7.6cm) long, .862" (21mm) diameter, 4.3 oz. (123 g.) wt.
Låter dig spendera mer tid på att öva med ditt favorit högkrafts, matchgevär utan rekyl. Absolut inget vapensmedsarbete krävs för fantastisk mynningskontroll och kraftigt reducerad kännbar rekyl även på automateldgevär. Ändrar den skarpa rekylen som de flesta skyttar upplever med militärt standardmunstycke till en mjuk tryckning. Ersätter enkelt den standard monterade ljuddämparen utan modifieringar och inkluderar främre siktfästet och slottmutterns ställskruv.
Obs: Passar INTE Norinco/Polytech (M305) med M15x.75 gänga.
Antal betyg: 7
Från brownells.com: 7
Medelbetyg: 3,9
Great Product(2010-12-22)
Easy to intsall. Intsalled it on my Chicom M14. Recoil feels like a 5.56 mm.
Great Product(2011-03-08)
Installed in minutes. Installed using only castle nut pliers, No allignment tool needed. Works as described, reducing recoil and muzzle flip.
Best Brake I've ever seen(2011-10-19)
Reduces muzzle climb to Nil. A felt reduction in recoil.
I noticed an improvement in accuracy immediately. This is the best brake for the m14/m1a I have seen.
Smooth recoil(2014-04-11)
I originally bought this product to give my M1A a different look. I had it installed at my local gun range by a professional gunsmith, shot a few rounds down range just to try this muzzle break, and I can say that it took away the edge of the recoil and made it smoother.I would highly recommend it for all M1A/M14 owners
Disappointing(2015-08-08)
Unlike the Good Iron Muzzle Break for the M1 Garand this is a two piece unit ⦠that is not clear from the description, or pictures, on the web site.
The unit I received had already begun to rust at the point where the rear mount and the break connect. The finish was scratched, dented, and overall the finish was poor.
Perhaps worse than the rust and the finish was that the rear mount and the break were not properly aligned. I didn't break out the protractor to figure out exactly how far, but looking at it from the rear, the break was rotated clockwise 1 to 2 degrees. The interesting thing is that there are alignment marks on both pieces that were apparently not used during assembly. I may have been able to correct the alignment; but with the rust and the poor finish, including burrs and incomplete machining of several of the ports, I returned it.
VERY DISAPPOINTED (2016-11-03)
Highly disappointed!! The muzzle brake I recieved had large amounts of rust on one side, enough that the bag it came in was stained orange. Also there are some scratches. Much like one of the other reviews on this brake mine is also a 2 piece design, both pieces have alignment marks and they are not properly aligned. My biggest issue is the large amount of rust, like it sat in water. Will exchange this one and see how the second one looks.
Fits on my rifle just fine, turned that recoil down to 3 from a 7, and it looks good.
The timing with the set screw was off a bit so I can't get it in the recess of the castle nut however the set screw it like extra insurance tighten the castlenut to proper and it'll be fine.
Other reviews stated that it was rusty and rusts quickly, my experience with the piece was it came with one small spot with rust. I cleaned and protected it with CLP end of my rusty woes. That was 8 months ago. Also congrats on owning an M1A. I haven't cleaned mine since I put this on it still runs no problems at all!
Produktnr: 851100014 SMITH ENTERPRISE MUZZLE BRAKE 30 CALIBER .595-32 SS PHOSPHATE Tillverkarens produktnummer: 2001 Låter dig spendera mer tid på att öva med ditt favorit högkrafts, matchgevär utan rekyl. Absolut inget vapensmedsarbete krävs för fantastisk mynningskontroll och kraftigt reducerad kännbar rekyl även på automateldgevär. Ändrar den skarpa rekylen som de flesta skyttar upplever med militärt standardmunstycke till en mjuk tryckning. Ersätter enkelt den standard monterade ljuddämparen utan modifieringar och inkluderar främre siktfästet och slottmutterns ställskruv.
3149SEK273 149,00 kr
*
Levernastid ca. 14-21 dagar. Mer än 10 st. i centrallagret.
SPRINGFIELD M14 Muzzle Brake minskar kraftigt den kännbar rekyl och förbättrar mynningskontroll, vilket gör det lättare att öva med ditt högkraftsgevär.
Enkel installation utan behov av vapensmedsarbete, ersätter standard ljuddämparen och inkluderar främre siktfästet och slottmutterns ställskruv.
Tillverkad av rostfritt stål med manganfosfat finish, och är kompatibel med Springfield M14 och M1A modeller.
Drop-On Recoil & Muzzle Control; Fits Domestic & Chinese M14/M1A's
Lets you spend more time practicing with your favorite high-power, match rifle without the recoil. Absolutely no gunsmithing required for amazing muzzle control and greatly reduced felt recoil even on select-fire rifles. Changes the sharp recoil that most shooters experience with the military stock into a soft push. Easily replaces the issue flash hider without alterations and includes the front sight dovetail and castle nut set screw.
Note: Will NOT fit Norinco/Polytech (M305) with M15x.75 thread.
SPECS: Machined steel, manganese phosphate finish. 3" (7.6cm) long, .862" (21mm) diameter, 4.3 oz. (123 g.) wt.
Låter dig spendera mer tid på att öva med ditt favorit högkrafts, matchgevär utan rekyl. Absolut inget vapensmedsarbete krävs för fantastisk mynningskontroll och kraftigt reducerad kännbar rekyl även på automateldgevär. Ändrar den skarpa rekylen som de flesta skyttar upplever med militärt standardmunstycke till en mjuk tryckning. Ersätter enkelt den standard monterade ljuddämparen utan modifieringar och inkluderar främre siktfästet och slottmutterns ställskruv.
Obs: Passar INTE Norinco/Polytech (M305) med M15x.75 gänga.
Antal betyg: 7
Från brownells.com: 7
Medelbetyg: 3,9
Great Product(2010-12-22)
Easy to intsall. Intsalled it on my Chicom M14. Recoil feels like a 5.56 mm.
Great Product(2011-03-08)
Installed in minutes. Installed using only castle nut pliers, No allignment tool needed. Works as described, reducing recoil and muzzle flip.
Best Brake I've ever seen(2011-10-19)
Reduces muzzle climb to Nil. A felt reduction in recoil.
I noticed an improvement in accuracy immediately. This is the best brake for the m14/m1a I have seen.
Smooth recoil(2014-04-11)
I originally bought this product to give my M1A a different look. I had it installed at my local gun range by a professional gunsmith, shot a few rounds down range just to try this muzzle break, and I can say that it took away the edge of the recoil and made it smoother.I would highly recommend it for all M1A/M14 owners
Disappointing(2015-08-08)
Unlike the Good Iron Muzzle Break for the M1 Garand this is a two piece unit ⦠that is not clear from the description, or pictures, on the web site.
The unit I received had already begun to rust at the point where the rear mount and the break connect. The finish was scratched, dented, and overall the finish was poor.
Perhaps worse than the rust and the finish was that the rear mount and the break were not properly aligned. I didn't break out the protractor to figure out exactly how far, but looking at it from the rear, the break was rotated clockwise 1 to 2 degrees. The interesting thing is that there are alignment marks on both pieces that were apparently not used during assembly. I may have been able to correct the alignment; but with the rust and the poor finish, including burrs and incomplete machining of several of the ports, I returned it.
VERY DISAPPOINTED (2016-11-03)
Highly disappointed!! The muzzle brake I recieved had large amounts of rust on one side, enough that the bag it came in was stained orange. Also there are some scratches. Much like one of the other reviews on this brake mine is also a 2 piece design, both pieces have alignment marks and they are not properly aligned. My biggest issue is the large amount of rust, like it sat in water. Will exchange this one and see how the second one looks.
Fits on my rifle just fine, turned that recoil down to 3 from a 7, and it looks good.
The timing with the set screw was off a bit so I can't get it in the recess of the castle nut however the set screw it like extra insurance tighten the castlenut to proper and it'll be fine.
Other reviews stated that it was rusty and rusts quickly, my experience with the piece was it came with one small spot with rust. I cleaned and protected it with CLP end of my rusty woes. That was 8 months ago. Also congrats on owning an M1A. I haven't cleaned mine since I put this on it still runs no problems at all!