Över 300 000 kunder - vi sĂ€ger tack!

40 000+ produkter inom jakt och skytte

EGW
LPA-LOW LEUPOLD DELTAPONT PRO SIGHT MOUNT

841370115662 296000678
EGW red dot sights are meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install. Simply remove the rear sight on your gun and replace it with EGW mount in order to mount your Leupold DeltaPoint Pro, JPoint, Redfield Accelerator, or Optima red-dot sight. You can take the mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mountwill make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs Modification of your firearm may nullify the manufacturer's warranty. This product should be installed and checked by a qualified gunsmith. No liability is expressed or implied for damage or injury which may result from improper installation or use of this product. This mount does not fit: Rock Island 1911s EAA / Tanfoglio Witness' with LPA/Bomar style rear sights (EAA Super Sight)
949 949 1 SEK
Produktnr: 296000678
EGW LPA-LOW LEUPOLD DELTAPOINT PRO SIGHT MOUNT
Tillverkarens produktnummer: 49403 841370115662 EGW rödpunktssikten Àr avsedda att installeras frÄn vÀnster till höger (med pistolen riktad framÄt). Svansen har en progressiv avsmalning för att underlÀtta installationen. Ta helt enkelt bort det bakre siktet pÄ ditt vapen och ersÀtt det med EGW-fÀstet för att kunna montera ditt Leupold DeltaPoint Pro, JPoint, Redfield Accelerator eller Optima rödpunktssikte. Du kan nÀr som helst ta bort fÀstet och Ätermontera ditt bakre sikte. Monteringsmaterial ingÄr. Installationsinstruktioner Ta bort det bakre siktet* Installera EGW Sight Mount i svansen Dra Ät stÀllskruven (om tillÀmpligt) Placera rödpunktssiktet pÄ EGW Sight Mount (att placera en liten bit papper mellan rödpunktssiktet och siktesfÀstet kommer att göra det lÀttare att ta bort och kommer att hÄlla Loctite borta frÄn rödpunktssiktet.) Applicera blÄ Loctite pÄ de medföljande monteringsskruvarna Dra Ät monteringsskruvarna till 15in/lbs Modifiering av ditt vapen kan upphÀva tillverkarens garanti. Denna produkt bör installeras och kontrolleras av en kvalificerad vapensmed. Inget ansvar uttrycks eller antyds för skada eller skada som kan uppstÄ pÄ grund av felaktig installation eller anvÀndning av denna produkt. Detta fÀste passar inte: Rock Island 1911s EAA / Tanfoglio Witness med LPA/Bomar-stil bakre sikten (EAA Super Sight)
949 SEK 0 949,00 kr *
Meddela om tillgÀnglighet
Ej tillgÀnglig.
Funktioner: Basantal: 1-Piece FĂ€rg: Svart Make: Magnum Research, IWI, EAA Material: Aluminum Modell: SAR K2P, Baby Desert Eagle, Witness Elite Match, Jericho 941 Stil: Tactical

Top takeaways

  1. EGW:s fÀste möjliggör enkel installation av Leupold DeltaPoint Pro och andra rödpunktssikten pÄ din pistol genom att ersÀtta det bakre siktet.
  2. Monteringsmaterial och detaljerade installationsinstruktioner medföljer, inklusive anvÀndning av blÄ Loctite för sÀker montering.
  3. Produkten passar inte Rock Island 1911s eller EAA/Tanfoglio Witness med LPA/Bomar-stil bakre sikten och bör installeras av en kvalificerad vapensmed.

Produktinformation

Antal Baser: 1-Piece FÀrg: Svart Make: EAA,IWI,Magnum Research Material: Aluminum Modell: Witness Elite Match,Baby Desert Eagle,SAR K2P,Jericho 941 Stil: Tactical Leveransvikt: 0,045kg Leveranshöjd: 25mm Leveransbredd: 76mm LeveranslÀngd: 140mm UPC : 841370115662

Produkt detaljer

Tillverkas i USA



Montera ditt Leupold DeltaPoint Pro med EGW LPA-Low Sight Mount. Enkel installation och hĂ„llbar aluminiumdesign. 🔧 Passar flera modeller!

EGW red dot sights are meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install. Simply remove the rear sight on your gun and replace it with EGW mount in order to mount your Leupold DeltaPoint Pro, JPoint, Redfield Accelerator, or Optima red-dot sight. You can take the mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mountwill make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs Modification of your firearm may nullify the manufacturer's warranty. This product should be installed and checked by a qualified gunsmith. No liability is expressed or implied for damage or injury which may result from improper installation or use of this product. This mount does not fit: Rock Island 1911s EAA / Tanfoglio Witness' with LPA/Bomar style rear sights (EAA Super Sight)
Tillbaka till toppen