Vertical Forend Grip With Built-In Quick-Deploy Bipod
Vertical grip with quick-deploy bipod legs is an economical alternative for applications where the original GPS-02 Grip Pod’s function and benefits are desired, but the steel reinforcements in its legs are excess to requirements. The GPS-LE (Law Enforcement) locks to the bottom accessory rail of your tactical rifle’s forend, just like the GPS-02, to provide the same enhanced control during CQB and a stable bipod rest for precise long-range fire. The grip’s hand-filling contours and deep grooves provide a solid purchase even when your hands are wet. Hit the large, deeply grooved release button, and a powerful spring deploys the legs instantly. Conveniently placed for thumb activation, the button sits flush with the surrounding surface to prevent accidental deployment. Extended legs provide sufficient elevation for a standard 30-round magazine to clear the ground, and will not snag on brush, vehicle interior, or other gear when retracted. Legs and grip are made of tough, injection-molded polymer; steel cross-bolt with easy-grip thumbscrew locks directly to any MIL-STD 1913 Picatinny rail to ensure a rock-solid fit. Accepts GPRS1 and GPRS2 bolt-on accessory rails, available separately. May be used on many non-AR rifles and light machine guns with forend accessory rails.
SPECS: Reinforced polymer, black. 6¼” (15.9cm) long with legs retracted. 8½” (21.6cm) high with legs extended. 13⁄8" (3.5cm) diameter. 7 oz. (197g).
Mer...
Vertikalt Framstocksgrepp Med Inbyggd Snabb-Utskjutbar Bipod
Vertikalt grepp med snabbt utskjutbara bipodbens är ett ekonomiskt alternativ för situationer där den ursprungliga GPS-02 Grip Pod-funktionen och fördelarna önskas, men där stålförstärkningarna i benen inte är nödvändiga. GPS-LE (Law Enforcement) fäster på den undre tillbehörsrälsen på din taktiska gevärs framstock, precis som GPS-02, för att erbjuda samma förbättrade kontroll under CQB och en stabil bipodstöd för exakt skjutning på långt håll. Greppets handfyllande konturer och djupa spår ger ett säkert grepp även när händerna är våta. Tryck på den stora, djupt räfflade utlösningsknappen, och en kraftfull fjäder skjuter ut benen omedelbart. Knappen, som är placerad för aktivering med tummen, sitter i nivå med den omgivande ytan för att förhindra oavsiktlig utskjutning. Utskjutna ben ger tillräcklig höjd för att ett standard 30-rundors magasin ska kunna hållas ovanför marken, och kommer inte att fastna i buskage, fordonets interiör eller annan utrustning när de är indragna. Ben och grepp är tillverkade av tålig, formsprutad polymer; stålkorsbult med enkelt greppbar tumskruv låser direkt till alla MIL-STD 1913 Picatinny rälsar för att säkerställa en stenfast passform. Accepterar GPRS1 och GPRS2 påskruvbara tillbehörsrälsar, som säljs separat. Kan användas på många icke-AR gevär och lätta kulsprutor med framstocks tillbehörsrälsar.
SPECS: Förstärkt polymer, svart. 6¼” (15.9cm) lång med indragna ben. 8½” (21.6cm) hög med utsträckta ben. 13⁄8" (3.5cm) diameter. 7 oz. (197g).
Mer...
Kundernas betyg påG.P.S. LE MODEL GRIP POD PICATINNY MOUNT 6.25-8.5" BLACK
Antal betyg: 11
Från brownells.com: 11
Medelbetyg: 4,8
Great Product!(2010-09-09)
I love my Grip Pod. Very quick to deploy and the gun is very stable. I used a Harris bipod before getting the Grip Pod. The gun is just as easy to shoot off of the Grip Pod and it weighs much less than the Harris.
Plus, it looks cool, and that's also important!
quick, easy, and fun!(2010-09-17)
I was first issued the grip pod for a 2008 deployment to Iraq, and have now deployed twice with it. Having a single piece of gear that can fill 2 roles very well is a no brainer for most. The grip pod mounts very easily, requiring no tools, just a simple plastic wing nut that does not protrude to much. the front and back of the grip are ribbes for exrta gripping, while the sides are flat to accomodate pressure pads for light, lasers, ets. The release button for the bipods is idealy located in line with the barrel at the top of the grip, in perfect thumb position. A simple push and the two legs rapidly shoot out and spread (its great fun to "pop" the legs onto a sleeping Marine when boredon sets in!).
Now, be advised, the grip pod is rather large by other verticle for grip standards. I found the extra girth to be comforting on long patrols, and the extra length came in handy too after long hours.
I have never been a fan of bipods on patrol rifles, they always get in the way when deployed, they rattle, and if they are stowed they cannot be rapidly deployed. The grip pod solves all of these problems, as you can easily deploy with the push of a button while dropping to the prone.
As with all gear, the grip pod requires periodic dissasembly and cleaning, or the feet will not fully deploy when in a dusty environment.
All in all, an excellend piece of gear that I will gladly purchase again and would highly recomend to anyone.
It's a trade off(2009-11-09)
This is a very well made product that is durable and locks up tight.
It is a bit fat compared to most forward grips. The bipod is not adjustable. It is nice because you can set your rifle down without laying it on it's side.
While I like mine and have it on a heavv barreled AR I feel that it puts the shooter a bit high. This would create an undesirable silohette if used in a combat situation.
Bottom line it has it's purpose but it's not a real bipod and sort of a clumsy grip
Fantastic Bi-Pod(2010-03-24)
Made Like No Other! First Quality Auto Bi Pod. Very Stable and well made. Love the versatility of this product. Use it with all AR's . Would recommend over folding spring bi pod.
Great Product!(2010-06-18)
This is a well designed and sturdily constructed product. The legs deploy with a push of a button and retract simply by pushing them up into the grip. They lock automatically once they are in place. The bipod legs are steel lined and the hinge is also steel. The legs are stable when deployed, and are the correct height when shooting from the bench. The feet are wide enough to resist sinking into the ground when shooting prone. I like this product.
Combat Proven(2010-07-17)
Unlike the cheaper Knock-Offs this works. The US Army just ordered 250,000. For Police and Military, this provides an excellent shooting platform for rapid engagement from car hoods, or short walls. Not meant to compete with fold down benchrest bipods, so they shouldn't be compared to them. Durable, and sturdy.
Sturdy forward grip/ bipod(2011-11-06)
great for rapid deployment of a bipop, and to rest your rifle on the shooting bemch. it just feels sturdy in your hand, instead of some others that you can tell are just cheap.
love it(2012-02-09)
i have a grip pod on my ruger 1022 with a ATI folding stock it make the gun look and feel tuff
There is nothing like this(2012-05-02)
Only a serious Goof would give this 3 stars! This is an absulte must on a Ar 15 platform. Eliminates the need for both a BiPod and a Grip on the same weapon. Built tough and solid, quick release of BiPod is perfect. abilty to shoot while holding on to the BiPod lends itself more accurate shot, if you ever need it in a standing position this is much more comfortable intsead of grabbing barrel assembly.
A must have for AR-15 Optics(2012-08-26)
If your AR-15 has optics, then you need the Grip Pod. Your have vertical grip for quick movement and muzzle control and you have a bi-pod that allows for excellent mid to long range accuracy. This may be the moderate duty version but it is heavy, well made and very durable. I would not hesitate to take into action.
Very convenient on a tactical(2013-04-12)
This is my second grip pod. They are very ergonomic for a standing shot and work well from a bench rest. The quality is very good with the metal reinforcement.
Produktnr: 100003633 G.P.S. LE MODEL GRIP POD PICATINNY MOUNT 6.25-8.5" BLACK Tillverkarens produktnummer: GPS-LE793573782915 Vertikalt grepp med snabbt utskjutbara bipodbens är ett ekonomiskt alternativ för situationer där den ursprungliga GPS-02 Grip Pod-funktionen och fördelarna önskas, men där stålförstärkningarna i benen inte är nödvändiga. GPS-LE (Law Enforcement) fäster på den undre tillbehörsrälsen på din taktiska gevärs framstock, precis som GPS-02, för att erbjuda samma förbättrade kontroll under CQB och en stabil bipodstöd för exakt skjutning på långt håll. Greppets handfyllande konturer och djupa spår ger ett säkert grepp även när händerna är våta. Tryck på den stora, djupt räfflade utlösningsknappen, och en kraftfull fjäder skjuter ut benen omedelbart. Knappen, som är placerad för aktivering med tummen, sitter i nivå med den omgivande ytan för att förhindra oavsiktlig utskjutning. Utskjutna ben ger tillräcklig höjd för att ett standard 30-rundors magasin ska kunna hållas ovanför marken, och kommer inte att fastna i buskage, fordonets interiör eller annan utrustning när de är indragna. Ben och grepp är tillverkade av tålig, formsprutad polymer; stålkorsbult med enkelt greppbar tumskruv låser direkt till alla MIL-STD 1913 Picatinny rälsar för att säkerställa en stenfast passform. Accepterar GPRS1 och GPRS2 påskruvbara tillbehörsrälsar, som säljs separat. Kan användas på många icke-AR gevär och lätta kulsprutor med framstocks tillbehörsrälsar.
2099SEK02 099,00 kr
*
Restorder. Skickas när den finns i lager. Leveranstid ca 4-12 veckor från centrallagret.
Vertical Forend Grip With Built-In Quick-Deploy Bipod
Vertical grip with quick-deploy bipod legs is an economical alternative for applications where the original GPS-02 Grip Pod’s function and benefits are desired, but the steel reinforcements in its legs are excess to requirements. The GPS-LE (Law Enforcement) locks to the bottom accessory rail of your tactical rifle’s forend, just like the GPS-02, to provide the same enhanced control during CQB and a stable bipod rest for precise long-range fire. The grip’s hand-filling contours and deep grooves provide a solid purchase even when your hands are wet. Hit the large, deeply grooved release button, and a powerful spring deploys the legs instantly. Conveniently placed for thumb activation, the button sits flush with the surrounding surface to prevent accidental deployment. Extended legs provide sufficient elevation for a standard 30-round magazine to clear the ground, and will not snag on brush, vehicle interior, or other gear when retracted. Legs and grip are made of tough, injection-molded polymer; steel cross-bolt with easy-grip thumbscrew locks directly to any MIL-STD 1913 Picatinny rail to ensure a rock-solid fit. Accepts GPRS1 and GPRS2 bolt-on accessory rails, available separately. May be used on many non-AR rifles and light machine guns with forend accessory rails.
SPECS: Reinforced polymer, black. 6¼” (15.9cm) long with legs retracted. 8½” (21.6cm) high with legs extended. 13⁄8" (3.5cm) diameter. 7 oz. (197g).
Mer...
Vertikalt Framstocksgrepp Med Inbyggd Snabb-Utskjutbar Bipod
Vertikalt grepp med snabbt utskjutbara bipodbens är ett ekonomiskt alternativ för situationer där den ursprungliga GPS-02 Grip Pod-funktionen och fördelarna önskas, men där stålförstärkningarna i benen inte är nödvändiga. GPS-LE (Law Enforcement) fäster på den undre tillbehörsrälsen på din taktiska gevärs framstock, precis som GPS-02, för att erbjuda samma förbättrade kontroll under CQB och en stabil bipodstöd för exakt skjutning på långt håll. Greppets handfyllande konturer och djupa spår ger ett säkert grepp även när händerna är våta. Tryck på den stora, djupt räfflade utlösningsknappen, och en kraftfull fjäder skjuter ut benen omedelbart. Knappen, som är placerad för aktivering med tummen, sitter i nivå med den omgivande ytan för att förhindra oavsiktlig utskjutning. Utskjutna ben ger tillräcklig höjd för att ett standard 30-rundors magasin ska kunna hållas ovanför marken, och kommer inte att fastna i buskage, fordonets interiör eller annan utrustning när de är indragna. Ben och grepp är tillverkade av tålig, formsprutad polymer; stålkorsbult med enkelt greppbar tumskruv låser direkt till alla MIL-STD 1913 Picatinny rälsar för att säkerställa en stenfast passform. Accepterar GPRS1 och GPRS2 påskruvbara tillbehörsrälsar, som säljs separat. Kan användas på många icke-AR gevär och lätta kulsprutor med framstocks tillbehörsrälsar.
SPECS: Förstärkt polymer, svart. 6¼” (15.9cm) lång med indragna ben. 8½” (21.6cm) hög med utsträckta ben. 13⁄8" (3.5cm) diameter. 7 oz. (197g).
Mer...
Kundernas betyg påG.P.S. LE MODEL GRIP POD PICATINNY MOUNT 6.25-8.5" BLACK
Antal betyg: 11
Från brownells.com: 11
Medelbetyg: 4,8
Great Product!(2010-09-09)
I love my Grip Pod. Very quick to deploy and the gun is very stable. I used a Harris bipod before getting the Grip Pod. The gun is just as easy to shoot off of the Grip Pod and it weighs much less than the Harris.
Plus, it looks cool, and that's also important!
quick, easy, and fun!(2010-09-17)
I was first issued the grip pod for a 2008 deployment to Iraq, and have now deployed twice with it. Having a single piece of gear that can fill 2 roles very well is a no brainer for most. The grip pod mounts very easily, requiring no tools, just a simple plastic wing nut that does not protrude to much. the front and back of the grip are ribbes for exrta gripping, while the sides are flat to accomodate pressure pads for light, lasers, ets. The release button for the bipods is idealy located in line with the barrel at the top of the grip, in perfect thumb position. A simple push and the two legs rapidly shoot out and spread (its great fun to "pop" the legs onto a sleeping Marine when boredon sets in!).
Now, be advised, the grip pod is rather large by other verticle for grip standards. I found the extra girth to be comforting on long patrols, and the extra length came in handy too after long hours.
I have never been a fan of bipods on patrol rifles, they always get in the way when deployed, they rattle, and if they are stowed they cannot be rapidly deployed. The grip pod solves all of these problems, as you can easily deploy with the push of a button while dropping to the prone.
As with all gear, the grip pod requires periodic dissasembly and cleaning, or the feet will not fully deploy when in a dusty environment.
All in all, an excellend piece of gear that I will gladly purchase again and would highly recomend to anyone.
It's a trade off(2009-11-09)
This is a very well made product that is durable and locks up tight.
It is a bit fat compared to most forward grips. The bipod is not adjustable. It is nice because you can set your rifle down without laying it on it's side.
While I like mine and have it on a heavv barreled AR I feel that it puts the shooter a bit high. This would create an undesirable silohette if used in a combat situation.
Bottom line it has it's purpose but it's not a real bipod and sort of a clumsy grip
Fantastic Bi-Pod(2010-03-24)
Made Like No Other! First Quality Auto Bi Pod. Very Stable and well made. Love the versatility of this product. Use it with all AR's . Would recommend over folding spring bi pod.
Great Product!(2010-06-18)
This is a well designed and sturdily constructed product. The legs deploy with a push of a button and retract simply by pushing them up into the grip. They lock automatically once they are in place. The bipod legs are steel lined and the hinge is also steel. The legs are stable when deployed, and are the correct height when shooting from the bench. The feet are wide enough to resist sinking into the ground when shooting prone. I like this product.
Combat Proven(2010-07-17)
Unlike the cheaper Knock-Offs this works. The US Army just ordered 250,000. For Police and Military, this provides an excellent shooting platform for rapid engagement from car hoods, or short walls. Not meant to compete with fold down benchrest bipods, so they shouldn't be compared to them. Durable, and sturdy.
Sturdy forward grip/ bipod(2011-11-06)
great for rapid deployment of a bipop, and to rest your rifle on the shooting bemch. it just feels sturdy in your hand, instead of some others that you can tell are just cheap.
love it(2012-02-09)
i have a grip pod on my ruger 1022 with a ATI folding stock it make the gun look and feel tuff
There is nothing like this(2012-05-02)
Only a serious Goof would give this 3 stars! This is an absulte must on a Ar 15 platform. Eliminates the need for both a BiPod and a Grip on the same weapon. Built tough and solid, quick release of BiPod is perfect. abilty to shoot while holding on to the BiPod lends itself more accurate shot, if you ever need it in a standing position this is much more comfortable intsead of grabbing barrel assembly.
A must have for AR-15 Optics(2012-08-26)
If your AR-15 has optics, then you need the Grip Pod. Your have vertical grip for quick movement and muzzle control and you have a bi-pod that allows for excellent mid to long range accuracy. This may be the moderate duty version but it is heavy, well made and very durable. I would not hesitate to take into action.
Very convenient on a tactical(2013-04-12)
This is my second grip pod. They are very ergonomic for a standing shot and work well from a bench rest. The quality is very good with the metal reinforcement.