Low-profile, all-steel, detachable sling mount is designed for use with standard KeyMod mounting holes and rails. Bearing cups are cut near the bottom edge of the mount, letting the swivel set as deeply as possible through the KeyMod holes. Streamlined mount helps increase mobility while decreasing the "snag" factor. Mount accepts standard push button QD sling swivels. Requires three KeyMod attachment hole mounting points. Includes Torx wrench for installation.
Lågprofils, helt i stål, avtagbar remfäste är designad för användning med standard KeyMod-monteringshål och skenor. Lagerkopparna är skurna nära den nedre kanten av fästet, vilket låter sviveln sätta sig så djupt som möjligt genom KeyMod-hålen. Den strömlinjeformade monteringen bidrar till ökad rörlighet samtidigt som den minskar "fasthaknings"-faktorn. Fästet accepterar standard tryckknapps QD-remfästen. Kräver tre KeyMod-monteringspunkter. Inkluderar Torxnyckel för installation.
Kundernas betyg påBRAVO COMPANY AR-15/M16 KEYMOD SLING MOUNT
Antal betyg: 7
Från brownells.com: 7
Medelbetyg: 3,9
Doesn't fit(2016-07-21)
This did not fit into keymod slots on three different guns I tried. One was a Chinese knock off, one was a Samson free float rail and the other was a made in USA forend. Problem appears to be that the diameter of the lock screws is too large. Since the screw itself has to rotate in the slot to lock it, there is no practical way to reduce the diameter and I didn't want to grind on the slots since then other keymod accessories would be a sloppy fit.
Lo-Profile - High Quality(2016-08-08)
Anti-Rotational, Low-Profile & Excellent Quality.
Zero Issues and would buy again.
The best keymod quick attachment mount(2016-08-19)
This attachment locks up perfect on my KMR rail! It's a high-quality Bravo Company parts that will not fail you! Perfect for your one to two point convertible sling! Maybe the guy they gave this item a 1 star review should quit buying cheap Chinese knockoff keymod rails! I guarantee you would have no problem mounting this quickly and easily to a Noveske, to a KMR or to a Midwest Industries keymod rail!
Ignore genius Jim. Companies still mess up 1913 rails, and keymod is more complex so What makes you think it's going to fit some out of spec BS? Chinese knock off? Why is that even counted as a factor? Put it on a rail from a known quality manufacturer, and it'll work. Unless you're struggling with the concept of proper usage but they even put an arrow on it to help with installation. QD mounts only have to check a few blocks. It has to fit on the rail - check (get an in spec rail and it will). It has to retain the QD - check. That's all it has to do. Limited rotation is an added bonus that most people will agree should be incorporated - check. The best part though, is that it uses the actual keymod slot for the QD so it has literally the lowest profile possible. There is no better QD mount, period.
Sleek QD Mount(2016-11-09)
This is an awesome addition to any Keymod rail. The first time I tried to mount it, it didn't fit, but that was my inexperience with the system. It fits using 3 spaces, not 2 as I originally thought. I think the guy who gave a 1 star rating isn't putting it on correctly. Can't go wrong with BCM!
Disappointed(2017-09-16)
Purchased 3 of these. One was so far off spec,it would not fit. The other two, I did eventually get installed.
Put a Mic on them and they varied by over .01 inch
.
The ones from Daniel Defense installed easily, fast, etc.
(guess you get what you pay for)!
Superior fit, locks up attached swivel(2017-11-15)
I was ready to order additional swivel mounts after tightening this one down. Tight fit, easy to install.
The mount is designed to limit travel of the swivel to 8 specific points and it does just that. No more tangled slings!
It is very low profile and will not budge once mounted. I have been testing this mount by simply yanking on it, twisting it by hand to see if it would slip out of any of the limiting holes. Every angle that you could possibly use is available thanks to the limiting holes of the mount.
Produktnr: 100015296 BRAVO COMPANY AR-15/M16 KEYMOD SLING MOUNT Tillverkarens produktnummer: BCM-KMSM855877004695 Lågprofils, helt i stål, avtagbar remfäste är designad för användning med standard KeyMod-monteringshål och skenor. Lagerkopparna är skurna nära den nedre kanten av fästet, vilket låter sviveln sätta sig så djupt som möjligt genom KeyMod-hålen. Den strömlinjeformade monteringen bidrar till ökad rörlighet samtidigt som den minskar "fasthaknings"-faktorn. Fästet accepterar standard tryckknapps QD-remfästen. Kräver tre KeyMod-monteringspunkter. Inkluderar Torxnyckel för installation.
389SEK77389,00 kr
*
Levernastid ca. 14-21 dagar. Mer än 10 st. i centrallagret.
Low-profile, all-steel, detachable sling mount is designed for use with standard KeyMod mounting holes and rails. Bearing cups are cut near the bottom edge of the mount, letting the swivel set as deeply as possible through the KeyMod holes. Streamlined mount helps increase mobility while decreasing the "snag" factor. Mount accepts standard push button QD sling swivels. Requires three KeyMod attachment hole mounting points. Includes Torx wrench for installation.
Lågprofils, helt i stål, avtagbar remfäste är designad för användning med standard KeyMod-monteringshål och skenor. Lagerkopparna är skurna nära den nedre kanten av fästet, vilket låter sviveln sätta sig så djupt som möjligt genom KeyMod-hålen. Den strömlinjeformade monteringen bidrar till ökad rörlighet samtidigt som den minskar "fasthaknings"-faktorn. Fästet accepterar standard tryckknapps QD-remfästen. Kräver tre KeyMod-monteringspunkter. Inkluderar Torxnyckel för installation.
Kundernas betyg påBRAVO COMPANY AR-15/M16 KEYMOD SLING MOUNT
Antal betyg: 7
Från brownells.com: 7
Medelbetyg: 3,9
Doesn't fit(2016-07-21)
This did not fit into keymod slots on three different guns I tried. One was a Chinese knock off, one was a Samson free float rail and the other was a made in USA forend. Problem appears to be that the diameter of the lock screws is too large. Since the screw itself has to rotate in the slot to lock it, there is no practical way to reduce the diameter and I didn't want to grind on the slots since then other keymod accessories would be a sloppy fit.
Lo-Profile - High Quality(2016-08-08)
Anti-Rotational, Low-Profile & Excellent Quality.
Zero Issues and would buy again.
The best keymod quick attachment mount(2016-08-19)
This attachment locks up perfect on my KMR rail! It's a high-quality Bravo Company parts that will not fail you! Perfect for your one to two point convertible sling! Maybe the guy they gave this item a 1 star review should quit buying cheap Chinese knockoff keymod rails! I guarantee you would have no problem mounting this quickly and easily to a Noveske, to a KMR or to a Midwest Industries keymod rail!
Ignore genius Jim. Companies still mess up 1913 rails, and keymod is more complex so What makes you think it's going to fit some out of spec BS? Chinese knock off? Why is that even counted as a factor? Put it on a rail from a known quality manufacturer, and it'll work. Unless you're struggling with the concept of proper usage but they even put an arrow on it to help with installation. QD mounts only have to check a few blocks. It has to fit on the rail - check (get an in spec rail and it will). It has to retain the QD - check. That's all it has to do. Limited rotation is an added bonus that most people will agree should be incorporated - check. The best part though, is that it uses the actual keymod slot for the QD so it has literally the lowest profile possible. There is no better QD mount, period.
Sleek QD Mount(2016-11-09)
This is an awesome addition to any Keymod rail. The first time I tried to mount it, it didn't fit, but that was my inexperience with the system. It fits using 3 spaces, not 2 as I originally thought. I think the guy who gave a 1 star rating isn't putting it on correctly. Can't go wrong with BCM!
Disappointed(2017-09-16)
Purchased 3 of these. One was so far off spec,it would not fit. The other two, I did eventually get installed.
Put a Mic on them and they varied by over .01 inch
.
The ones from Daniel Defense installed easily, fast, etc.
(guess you get what you pay for)!
Superior fit, locks up attached swivel(2017-11-15)
I was ready to order additional swivel mounts after tightening this one down. Tight fit, easy to install.
The mount is designed to limit travel of the swivel to 8 specific points and it does just that. No more tangled slings!
It is very low profile and will not budge once mounted. I have been testing this mount by simply yanking on it, twisting it by hand to see if it would slip out of any of the limiting holes. Every angle that you could possibly use is available thanks to the limiting holes of the mount.