The Lee Taper Crimp Die is hardened steel designed to overcome crimp problems caused by poor die design. Jacketed bullets must have a crimp groove.
Mer...
Lee Taper Crimp Die Àr tillverkad i hÀrdat stÄl och Àr designad för att övervinna problem med krimpning som orsakas av dÄlig die-design. Mantlade kulor mÄste ha en krimp-spÄr.
Mer...
Kundernas betyg pÄLEE PRECISION LEE TAPER CRIMP DIE, 9MM
Antal betyg: 1
FrÄn brownells.com: 1
Medelbetyg: 5
Works well at about half the price(2014-04-11)
The only thing I'm not terribly happy with is the O ring adjustment lock. I think it's about 90% as good as the RCBS adjustment lock rings that you lock with an Allen wrench and they STAY locked, however, if I really want, I can order inexpensive RCBS lock rings and use them on my Lee dies. Besides, I didn't have enough crimp on my .45 ACP lead semi-wadcutters, and when I inserted a loaded round into the die and added crimp to where I thought it should be, and tried to tighten the Lee lock ring with a crescent wrench without holding the die with another crescent wrench, the die turned in the 3 die turret until it stopped tightly up against the cartridge case. I looked at the taper crimp on the cartridge in the die, and found it to be perfect. I loaded the rest of my empty cases and found that the press handle "broke over" a little near the end of the stroke assuring as tight a crimp as possible. I have found no problems with this method after loading and firing 5 rounds, and the rest of my reloaded .45's look great!
Produktnr: 100053279 LEE PRECISION LEE TAPER CRIMP DIE, 9MM Tillverkarens produktnummer: 90780734307907808 Lee Taper Crimp Die Àr tillverkad i hÀrdat stÄl och Àr designad för att övervinna problem med krimpning som orsakas av dÄlig die-design. Mantlade kulor mÄste ha en krimp-spÄr.
249SEK0249,00 kr
*
Restorder. Skickas nÀr den finns i lager. Leveranstid ca 4-12 veckor frÄn centrallagret.
Funktioner:Laddverktyg: Taper Crimp DiesPatron: 9 mm Luger
Laddverktygstyp:
Taper Crimp Dies
Patron:
9 mm Luger
Leveransvikt: 0,091kgLeveranshöjd: 10mmLeveransbredd: 30mmLeveranslÀngd: 106mm
UPC
: 734307907808
Produkt detaljer
Tillverkas i USA
Produktnr: 100053275 LEE PRECISION LEE TAPER CRIMP DIE, 40 S&W/ 10MM Tillverkarens produktnummer: 90782734307907822 Lee Taper Crimp Die Àr tillverkad i hÀrdat stÄl och Àr designad för att övervinna problem med krimpning som orsakas av dÄlig die-design. Mantlade kulor mÄste ha en krimp-spÄr.
269SEK1269,00 kr
*
Levernastid ca. 14-21 dagar. 1 st. i centrallagret.
Funktioner:Laddverktyg: Taper Crimp DiesPatron: 10 mm Auto, 40 S&W
Produktnr: 100053278 LEE PRECISION LEE TAPER CRIMP DIE, 45 ACP Tillverkarens produktnummer: 90785734307907853 Lee Taper Crimp Die Àr tillverkad i hÀrdat stÄl och Àr designad för att övervinna problem med krimpning som orsakas av dÄlig die-design. Mantlade kulor mÄste ha en krimp-spÄr.
259SEK2259,00 kr
*
Levernastid ca. 14-21 dagar. 2 st. i centrallagret.
Funktioner:Laddverktyg: Taper Crimp DiesPatron: 45 Auto (ACP)
Produktnr: 100053274 LEE PRECISION LEE TAPER CRIMP DIE, 38 SPECIAL Tillverkarens produktnummer: 90781734307907815 Lee Taper Crimp Die Àr tillverkad i hÀrdat stÄl och Àr designad för att övervinna problem med krimpning som orsakas av dÄlig die-design. Mantlade kulor mÄste ha en krimp-spÄr.
269SEK0269,00 kr
*
Restorder. Skickas nÀr den finns i lager. Leveranstid ca 4-12 veckor frÄn centrallagret.
Funktioner:Laddverktyg: Taper Crimp DiesPatron: 357 Magnum, 38 Special, 357 Maximum
The Lee Taper Crimp Die is hardened steel designed to overcome crimp problems caused by poor die design. Jacketed bullets must have a crimp groove.
Mer...
Lee Taper Crimp Die Àr tillverkad i hÀrdat stÄl och Àr designad för att övervinna problem med krimpning som orsakas av dÄlig die-design. Mantlade kulor mÄste ha en krimp-spÄr.
Mer...
Kundernas betyg pÄLEE PRECISION LEE TAPER CRIMP DIE, 9MM
Antal betyg: 1
FrÄn brownells.com: 1
Medelbetyg: 5
Works well at about half the price(2014-04-11)
The only thing I'm not terribly happy with is the O ring adjustment lock. I think it's about 90% as good as the RCBS adjustment lock rings that you lock with an Allen wrench and they STAY locked, however, if I really want, I can order inexpensive RCBS lock rings and use them on my Lee dies. Besides, I didn't have enough crimp on my .45 ACP lead semi-wadcutters, and when I inserted a loaded round into the die and added crimp to where I thought it should be, and tried to tighten the Lee lock ring with a crescent wrench without holding the die with another crescent wrench, the die turned in the 3 die turret until it stopped tightly up against the cartridge case. I looked at the taper crimp on the cartridge in the die, and found it to be perfect. I loaded the rest of my empty cases and found that the press handle "broke over" a little near the end of the stroke assuring as tight a crimp as possible. I have found no problems with this method after loading and firing 5 rounds, and the rest of my reloaded .45's look great!