Designed to give you the edge over your competition. Patented, proven push-pin design Quickly and easily attaches to and detaches from the magazine tube No specialty tools or devices required for assembly/disassembly One piece design, no small parts to keep track of Fits the USPSA 140mm guage Holds 20+1 rounds of 40S&W Holds 23+1 rounds of 9mm Easy to load into the gun with fully loaded magazine Adds weight to magazine base to help mags drop free easier for faster reloads Made in the USA
SPECS: CNC machined from billet aluminum. Hard Anodized
Designad för att ge dig fördelar över dina konkurrenter. Patenterad, beprövad knappsprintdesign Snabb och enkel att fästa på och ta bort från magasinet Inga specialverktyg eller anordningar behövs för montering/demontering Ett stycke design, inga smådelar att hålla reda på Passar USPSA 140mm mätaren Rymmer 20+1 patroner av 40S&W Rymmer 23+1 patroner av 9mm Enkel att ladda i vapnet med fulladdat magasin Lägger till vikt på magasinets botten för att hjälpa magasin att falla ut lättare för snabbare omladdningar Tillverkad i USA
SPECS: CNC-fräst från massiv aluminium. Hårdanodiserad
Mer...
Kundernas betyg påTARAN TACTICAL INNOVATIONS FIREPOWER BASE PAD KIT FOR GLOCK®, FLAT BLACK
Antal betyg: 10
Från brownells.com: 10
Medelbetyg: 3,3
G17/22 Mags, not G19/23(2018-04-04)
This base pad extension is made for full-size Glock magazines, and will cant Glock 19/23 magazines. The cant can cause malfunctions and/or decrease compacity. The site did not show option for compact or full-size selection, just 9/40 or 45. Luckily, I know someone with an extra base pad for G19 that is going to swap with me. Please offer in the future so other customers do not have the same issue.
Good ideaBUT..(2013-09-11)
Bad if you run a mag well on your glock, the way this secures is by a pin that protrudes up and down which is held in place (barely I might add) by an allen screw and prevents the base pad from sliding back off the mag by using the back of the mag, so this sticks up and hits the magwell first. For 2 more rounds its not worth the chance of this sliding off... I shoot a fair amount of IPSC and 3 gun was hoping for something more solid...
Great Basepads(2013-10-28)
I too am a competitive shooter primarily in USPSA but also compete in 3 gun. I've used the Arredondos previously which are a good design. The TT basepads uses AL vs. plastic (Arredondos) but at the same price. The capacity are the same for the different brands. I use the basepads on a Glock with a Dawson Precision mag well. I have no issues with interference with the retaining pin on the TT basepads. Time will tell how durable the TT basepads are as I just started using them.
Several malfunctions (2014-09-17)
Several malfunctions with this product. I returned the magazines to OEM and the magazines work flawless.
Sold construction for added firepower(2015-07-14)
The other reviews seemed to have issues, so far I have had none. My first try with this +6 base pad was adding it my glock 26 mags. While I needed to use a Glock 17 magazine spring, the product worked flawless and now I have 16+1 in my Glock 26 with the frame length between a G19 and G17 so it is still concealable. I own several more now. Great buy!
Good!(2016-01-28)
I've bought a couple of these and they seem to run fine for me. The construction and the way they attach to the magazine itself is my only complaint. The set screws have stripped out so I have just used the red loctite on the set pin itself and that holds very well. No problem with running these in my Glock in reference to the mag well.
Great Product(2016-05-16)
I read the low reviews and I had to shake my head. Yes, these will not work with some magwells because there are no set standards for a magwell. In terms of malfunctions, I have no experienced any. The included +10% spring works great. What does this base extension do? It adds an extra 6 rounds for your Glock 17 magazines, adds extra weight at the base so it helps ensure the magazine drops away when empty during a reload. I own six of these and they never fail to function. Highly recommend.
Another quality product(2016-06-06)
This is a really solid product. I too have been using Arredondo's for years and quite honestly, never experienced a failure. I saw these displayed at SHOT and was interested. So far after months of hard running these have performed the same, no issues. If installed properly I can't see these ever coming off inadvertently. I check the little set screw pin locker every once in a while, just in case, and it has not budged. A great product made out of AL at the same price point.
Well worth the money(2017-07-16)
I've been running these for a couple years now and they are still as solid as the day I received them. You have to check prior to buying if they are compatible with your magwell. An extra 6 rounds is always appreciated whether you're working the streets or gunning in a competition.
Failure to feed from plus 2 capacity. (2017-08-04)
Have had multiple failures to feed from the spring binding up in the extension. Will replace with tried and true Dawson precision. Wish I had never wasted the money. If you're going for "tactic-cool" this is all you. If your match, or more iumportantly, your life depends on your tools then do not buy this!
Produktnr: 100017992 TARAN TACTICAL INNOVATIONS FIREPOWER BASE PAD KIT FOR GLOCK®, FLAT BLACK Tillverkarens produktnummer: GBP940-00 Designad för att ge dig fördelar över dina konkurrenter. Patenterad, beprövad knappsprintdesign Snabb och enkel att fästa på och ta bort från magasinet Inga specialverktyg eller anordningar behövs för montering/demontering Ett stycke design, inga smådelar att hålla reda på Passar USPSA 140mm mätaren Rymmer 20+1 patroner av 40S&W Rymmer 23+1 patroner av 9mm Enkel att ladda i vapnet med fulladdat magasin Lägger till vikt på magasinets botten för att hjälpa magasin att falla ut lättare för snabbare omladdningar Tillverkad i USA
1199SEK01 199,00 kr
*
Restorder. Skickas när den finns i lager. Leveranstid ca 4-12 veckor från centrallagret.
Funktioner:Make: GlockModell: 17, 22, 34, 35Stil: Kit, Base Pad
Produktnr: 100012644 TARAN TACTICAL INNOVATIONS FIREPOWER BASE PAD KIT FOR GLOCK®, BLACK Tillverkarens produktnummer: GBP94001S Designad för att ge dig fördelar över dina konkurrenter. Patenterad, beprövad knappsprintdesign Snabb och enkel att fästa på och ta bort från magasinet Inga specialverktyg eller anordningar behövs för montering/demontering Ett stycke design, inga smådelar att hålla reda på Passar USPSA 140mm mätaren Rymmer 20+1 patroner av 40S&W Rymmer 23+1 patroner av 9mm Enkel att ladda i vapnet med fulladdat magasin Lägger till vikt på magasinets botten för att hjälpa magasin att falla ut lättare för snabbare omladdningar Tillverkad i USA
799SEK0799,00 kr
*
Restorder. Skickas när den finns i lager. Leveranstid ca 4-12 veckor från centrallagret.
Funktioner:Make: GlockStil: Base Pads, Magazine Springs
Produktnr: 100017994 TARAN TACTICAL INNOVATIONS FIREPOWER BASE PAD KIT FOR GLOCK®, RED Tillverkarens produktnummer: GBP940-03 Designad för att ge dig fördelar över dina konkurrenter. Patenterad, beprövad knappsprintdesign Snabb och enkel att fästa på och ta bort från magasinet Inga specialverktyg eller anordningar behövs för montering/demontering Ett stycke design, inga smådelar att hålla reda på Passar USPSA 140mm mätaren Rymmer 20+1 patroner av 40S&W Rymmer 23+1 patroner av 9mm Enkel att ladda i vapnet med fulladdat magasin Lägger till vikt på magasinets botten för att hjälpa magasin att falla ut lättare för snabbare omladdningar Tillverkad i USA
1149SEK01 149,00 kr
*
Restorder. Skickas när den finns i lager. Leveranstid ca 4-12 veckor från centrallagret.
Funktioner:Make: GlockModell: 17, 22, 34, 35Stil: Kit, Base Pad
Designed to give you the edge over your competition. Patented, proven push-pin design Quickly and easily attaches to and detaches from the magazine tube No specialty tools or devices required for assembly/disassembly One piece design, no small parts to keep track of Fits the USPSA 140mm guage Holds 20+1 rounds of 40S&W Holds 23+1 rounds of 9mm Easy to load into the gun with fully loaded magazine Adds weight to magazine base to help mags drop free easier for faster reloads Made in the USA
SPECS: CNC machined from billet aluminum. Hard Anodized
Designad för att ge dig fördelar över dina konkurrenter. Patenterad, beprövad knappsprintdesign Snabb och enkel att fästa på och ta bort från magasinet Inga specialverktyg eller anordningar behövs för montering/demontering Ett stycke design, inga smådelar att hålla reda på Passar USPSA 140mm mätaren Rymmer 20+1 patroner av 40S&W Rymmer 23+1 patroner av 9mm Enkel att ladda i vapnet med fulladdat magasin Lägger till vikt på magasinets botten för att hjälpa magasin att falla ut lättare för snabbare omladdningar Tillverkad i USA
SPECS: CNC-fräst från massiv aluminium. Hårdanodiserad
Mer...
Kundernas betyg påTARAN TACTICAL INNOVATIONS FIREPOWER BASE PAD KIT FOR GLOCK®, FLAT BLACK
Antal betyg: 10
Från brownells.com: 10
Medelbetyg: 3,3
G17/22 Mags, not G19/23(2018-04-04)
This base pad extension is made for full-size Glock magazines, and will cant Glock 19/23 magazines. The cant can cause malfunctions and/or decrease compacity. The site did not show option for compact or full-size selection, just 9/40 or 45. Luckily, I know someone with an extra base pad for G19 that is going to swap with me. Please offer in the future so other customers do not have the same issue.
Good ideaBUT..(2013-09-11)
Bad if you run a mag well on your glock, the way this secures is by a pin that protrudes up and down which is held in place (barely I might add) by an allen screw and prevents the base pad from sliding back off the mag by using the back of the mag, so this sticks up and hits the magwell first. For 2 more rounds its not worth the chance of this sliding off... I shoot a fair amount of IPSC and 3 gun was hoping for something more solid...
Great Basepads(2013-10-28)
I too am a competitive shooter primarily in USPSA but also compete in 3 gun. I've used the Arredondos previously which are a good design. The TT basepads uses AL vs. plastic (Arredondos) but at the same price. The capacity are the same for the different brands. I use the basepads on a Glock with a Dawson Precision mag well. I have no issues with interference with the retaining pin on the TT basepads. Time will tell how durable the TT basepads are as I just started using them.
Several malfunctions (2014-09-17)
Several malfunctions with this product. I returned the magazines to OEM and the magazines work flawless.
Sold construction for added firepower(2015-07-14)
The other reviews seemed to have issues, so far I have had none. My first try with this +6 base pad was adding it my glock 26 mags. While I needed to use a Glock 17 magazine spring, the product worked flawless and now I have 16+1 in my Glock 26 with the frame length between a G19 and G17 so it is still concealable. I own several more now. Great buy!
Good!(2016-01-28)
I've bought a couple of these and they seem to run fine for me. The construction and the way they attach to the magazine itself is my only complaint. The set screws have stripped out so I have just used the red loctite on the set pin itself and that holds very well. No problem with running these in my Glock in reference to the mag well.
Great Product(2016-05-16)
I read the low reviews and I had to shake my head. Yes, these will not work with some magwells because there are no set standards for a magwell. In terms of malfunctions, I have no experienced any. The included +10% spring works great. What does this base extension do? It adds an extra 6 rounds for your Glock 17 magazines, adds extra weight at the base so it helps ensure the magazine drops away when empty during a reload. I own six of these and they never fail to function. Highly recommend.
Another quality product(2016-06-06)
This is a really solid product. I too have been using Arredondo's for years and quite honestly, never experienced a failure. I saw these displayed at SHOT and was interested. So far after months of hard running these have performed the same, no issues. If installed properly I can't see these ever coming off inadvertently. I check the little set screw pin locker every once in a while, just in case, and it has not budged. A great product made out of AL at the same price point.
Well worth the money(2017-07-16)
I've been running these for a couple years now and they are still as solid as the day I received them. You have to check prior to buying if they are compatible with your magwell. An extra 6 rounds is always appreciated whether you're working the streets or gunning in a competition.
Failure to feed from plus 2 capacity. (2017-08-04)
Have had multiple failures to feed from the spring binding up in the extension. Will replace with tried and true Dawson precision. Wish I had never wasted the money. If you're going for "tactic-cool" this is all you. If your match, or more iumportantly, your life depends on your tools then do not buy this!