Great for short stroke cleaning applications when using J-B Bore Cleaner and other paste type cleaners. The stops prevent patches from coming out at the muzzle. Many shooters use them when treating a barrel with a bore conditioner. Three sizes available to fit Dewey and most other cleaning rods. Small stop fits 22-6.5mm caliber rods and the X-Large stops fits 35 caliber rods.
Mer...
Perfekt för rengöring med korta drag när du använder J-B Bore Cleaner och andra pastatyp rengöringsmedel. Stopparna förhindrar att lappar kommer ut vid mynningen. Många skyttar använder dem när de behandlar en pipa med ett pipkonditioneringsmedel. Tre storlekar finns tillgängliga för att passa Dewey och de flesta andra rengöringsstänger. Liten stopp passar 22-6,5mm kaliberstänger och den extra stora stoppen passar 35 kaliberstänger.
Mer...
Kundernas betyg påSINCLAIR INTERNATIONAL CLEANING ROD STOP - SMALL
Antal betyg: 2
Från brownells.com: 2
Medelbetyg: 3
Not as helpful as I had hoped(2014-10-18)
I bought the cleaning rod stops about a year or so ago for use with my Dewey 36" 22LR sized cleaning rod to clean my slide action and semi auto rimfire rifles. They're very easy to install, but the problem I've had is being able to keep them from sliding backwards instead of stopping against the muzzle when pushing a tight jag or bronze brush through the bore. These stops are handsomely constructed but it appears the nylon thumb screw just doesn't have enough bite to keep the stop from moving backwards when it's pushed against the muzzle with more than a little force. To counteract this movement I've resorted to cutting a half inch wide strip of duck tape and wrapping it around the rod with around 8 layers just behind where I want to set the stop. This has been helpful in preventing the stop from sliding backwards, especially when using a new and very tight fitting bore brush. Otherwise, I'm still glad I bought them because they're much better than using drill bit stops or trying to eyeball a witness mark on the rod to keep from banging the bronze brush against the bolt face of a Remington Model 12 and similar closed receivers. And I'd still recommend them to a friend with full disclosure of my experience with them, or until a better design comes to market.
Works great on Tipton Cleaning rod.(2014-10-30)
I read the one poor review and still decided to take the risk. I am glad I did. I installed the 30 cal stop on my 30 Cal Tipton Cleaning rod. At first, it did slide a bit when I first used it in my M1 Garand. I then used a little more twist on the set screw. After that, I had no issues. In fact, I was so happy with it that I just ordered 4 more 20 cal stops for my 3 other cleaning rods and one for a friend. I have since used the 30 cal stop in my S&W revolver, 357 lever, and 30-30 lever. One thing to keep in mind... It works GREAT once the length is set right. But be careful you don't set it with the bolt open then close bolt and try to use it. Obviously that won't work. ;)
Produktnr: 749000267 SINCLAIR INTERNATIONAL CLEANING ROD STOP - SMALL Tillverkarens produktnummer: 02-1000 Perfekt för rengöring med korta drag när du använder J-B Bore Cleaner och andra pastatyp rengöringsmedel. Stopparna förhindrar att lappar kommer ut vid mynningen. Många skyttar använder dem när de behandlar en pipa med ett pipkonditioneringsmedel. Tre storlekar finns tillgängliga för att passa Dewey och de flesta andra rengöringsstänger. Liten stopp passar 22-6,5mm kaliberstänger och den extra stora stoppen passar 35 kaliberstänger.
179SEK0179,00 kr
*
Restorder. Skickas när den finns i lager. Leveranstid ca 4-12 veckor från centrallagret.
Perfekt för rengöring med korta drag när du använder J-B Bore Cleaner och andra pastatyp rengöringsmedel.
Stopparna förhindrar att lappar kommer ut vid mynningen och används ofta vid pipkonditionering.
Finns i tre storlekar för att passa Dewey och de flesta andra rengöringsstänger: liten stopp för 22-6,5mm kaliberstänger och extra stor stopp för 35 kaliberstänger.
Brownells Sverige AB
Box 99
793 22 Leksand
Sverige
info@brownells.se
Produktnr: 749000230 SINCLAIR INTERNATIONAL CLEANING ROD STOP - X-LARGE Tillverkarens produktnummer: 02-1030 Perfekt för rengöring med korta drag när du använder J-B Bore Cleaner och andra pastatyp rengöringsmedel. Stopparna förhindrar att lappar kommer ut vid mynningen. Många skyttar använder dem när de behandlar en pipa med ett pipkonditioneringsmedel. Tre storlekar finns tillgängliga för att passa Dewey och de flesta andra rengöringsstänger. Liten stopp passar 22-6,5mm kaliberstänger och den extra stora stoppen passar 35 kaliberstänger.
Great for short stroke cleaning applications when using J-B Bore Cleaner and other paste type cleaners. The stops prevent patches from coming out at the muzzle. Many shooters use them when treating a barrel with a bore conditioner. Three sizes available to fit Dewey and most other cleaning rods. Small stop fits 22-6.5mm caliber rods and the X-Large stops fits 35 caliber rods.
Mer...
Perfekt för rengöring med korta drag när du använder J-B Bore Cleaner och andra pastatyp rengöringsmedel. Stopparna förhindrar att lappar kommer ut vid mynningen. Många skyttar använder dem när de behandlar en pipa med ett pipkonditioneringsmedel. Tre storlekar finns tillgängliga för att passa Dewey och de flesta andra rengöringsstänger. Liten stopp passar 22-6,5mm kaliberstänger och den extra stora stoppen passar 35 kaliberstänger.
Mer...
Kundernas betyg påSINCLAIR INTERNATIONAL CLEANING ROD STOP - SMALL
Antal betyg: 2
Från brownells.com: 2
Medelbetyg: 3
Not as helpful as I had hoped(2014-10-18)
I bought the cleaning rod stops about a year or so ago for use with my Dewey 36" 22LR sized cleaning rod to clean my slide action and semi auto rimfire rifles. They're very easy to install, but the problem I've had is being able to keep them from sliding backwards instead of stopping against the muzzle when pushing a tight jag or bronze brush through the bore. These stops are handsomely constructed but it appears the nylon thumb screw just doesn't have enough bite to keep the stop from moving backwards when it's pushed against the muzzle with more than a little force. To counteract this movement I've resorted to cutting a half inch wide strip of duck tape and wrapping it around the rod with around 8 layers just behind where I want to set the stop. This has been helpful in preventing the stop from sliding backwards, especially when using a new and very tight fitting bore brush. Otherwise, I'm still glad I bought them because they're much better than using drill bit stops or trying to eyeball a witness mark on the rod to keep from banging the bronze brush against the bolt face of a Remington Model 12 and similar closed receivers. And I'd still recommend them to a friend with full disclosure of my experience with them, or until a better design comes to market.
Works great on Tipton Cleaning rod.(2014-10-30)
I read the one poor review and still decided to take the risk. I am glad I did. I installed the 30 cal stop on my 30 Cal Tipton Cleaning rod. At first, it did slide a bit when I first used it in my M1 Garand. I then used a little more twist on the set screw. After that, I had no issues. In fact, I was so happy with it that I just ordered 4 more 20 cal stops for my 3 other cleaning rods and one for a friend. I have since used the 30 cal stop in my S&W revolver, 357 lever, and 30-30 lever. One thing to keep in mind... It works GREAT once the length is set right. But be careful you don't set it with the bolt open then close bolt and try to use it. Obviously that won't work. ;)