Redding Competition Bushing Neck Die Set includes a Competition Bushing Neck Sizing Die, a Body Die, and a Competition Bullet Seater. Neck Sizing Die and Seater feature micrometer adjustments. Bushings and Shellholder sold separately. Competition Bushing Neck Die - With this die, the cartridge case is completely supported and aligned with the sizing bushing before the sizing process begins. As the sizing process starts, the cartridge case remains supported in the tightly chambered, sliding sleeve as it moves upward while the resizing bushing self-centers on the case neck. The decapping rod is maintained in precise alignment by using the internal parts of the die as a linear support much like that of a firing pin. Meanwhile, the micrometer adjustment of the bushing position delivers precise control to the desired amount of neck length to be sized. Body Die -designed to full length resize the case body and bump the shoulder position for proper chambering without disturbing the case neck. Competition Bullet Seater - Tighter manufacturing tolerances have been made possible due to the details of the floating seating stem system. The bullet guide to seating stem fit is so precise that the seating stem can actually be demonstrated to "float"
Redding Competition Bushing Neck Die Set inkluderar en Competition Bushing Neck Sizing Die, en Body Die och en Competition Bullet Seater. Neck Sizing Die och Seater har mikrometerjusteringar. Bushings och Shellholder säljs separat. Competition Bushing Neck Die - Med denna die stöds och justeras patronhylsan helt med sizing bushing innan storleksprocessen börjar. När storleksprocessen inleds förblir patronhylsan stödd i den tätt chamberade, glidande ärmen medan den rör sig uppåt, samtidigt som resizing bushing självcentrerar på hylsans nacke. Decapping-stången hålls i exakt linje genom att använda de interna delarna av die som ett linjärt stöd, mycket likt en tändstift. Under tiden ger mikrometerjusteringen av bushingens position exakt kontroll över den önskade mängden nacklängd som ska storleksjusteras. Body Die - designad för att fullängdsjustera hylsans kropp och flytta axelpositionen för korrekt chambering utan att störa hylsnackdelen. Competition Bullet Seater - Strängare tillverkningsstandarder har blivit möjliga tack vare detaljerna i det flytande seating stem-systemet. Passformen mellan bullet guide och seating stem är så exakt att seating stem faktiskt kan demonstreras att "flyta".