Varukorgen är tom.

Varukorg

Hjälp och kontakt

Fri frakt på beställningar över 2.999 kr

100 dagars returrätt

Nyhetsbrev

REA

Över 300 000 kunder - vi säger tack!

4,93/5 "Mycket bra" (1400+ recensioner)

40 000+ produkter inom jakt och skytte

CYLINDER & SLIDE
COLT .380 ALUMINUM TRIGGER

000000003117 206000020

Replaces The Plastic Factory Part For Better Wear, Improved "Feel"

Long-wearing, CNC-machined, aluminum trigger easily replaces the Colt factory nylon/plastic trigger for increased durability and a more solid feeling trigger pull. Use as a standalone enhancement or part of a complete trigger job. Installation may require slight modification; completely eliminates premature trigger wear breakage at the trigger pivot pin hole.

SPECS: Aluminum, matte silver. Fits Colt .380 Government and Mustang models.

Mer...

Ersätter den plastiga fabriksdelen för bättre hållbarhet, förbättrad "känsla"

Långlivad, CNC-bearbetad, aluminiumavtryckare ersätter enkelt Colts fabrikstillverkade nylon/plastavtryckare för ökad hållbarhet och en mer solid känsla vid avtryck. Använd som en enskild förbättring eller som en del av ett komplett avtryckarjobb. Installationen kan kräva mindre modifieringar; eliminerar helt för tidigt slitage och brott på avtryckarens pivotstifthål.

SPECS: Aluminium, matt silver. Passar till Colt .380 Government och Mustang modeller.

Mer...

Kundernas betyg påCYLINDER & SLIDE ALUMINUM COLT .380 TRIGGER

Antal betyg: 8
Från brownells.com: 8
Medelbetyg: 4,1

I would and did buy this product again (2010-04-21)

Fits perfect in my Sig P238. A great improvement to the factory nylon trigger.

THIS WILL FIT THE SIG P238! nice piece! (2012-03-07)

I had asked the question about whether or not this would fit the new Sig P238, but the response was NO. I decided that my curiousity would not let that deter me from trying it out... After all the Wolff springs will fit both the Colt and the Sig. This went in without a problem and worked out very well. The only thing that I would add to this part (and I am surprised that it was not added) would be an overtravel screw at the bottom. I installed my own and it makes a huge difference. Also, one in a parkerized black would be sweet as well. If Cylinder and Slide decide to machine one in, please send one to me !! and Brownells, advertise this for the Sig P238 also.

A lot better (2012-04-02)

Much better than the factory plastic junk trigger that brakes.

If you have a Colt 380 buy this now. (2012-04-06)

If you have a Colt 380 buy this now. The cheap plastic trigger that comes in the gun will brake some day. You do not what that to be the day you need it.

Works ok in a government pocketlight. (2012-07-27)

mine had some metal shavings in the nooks and the mounting pin holes shifted the trigger lever back a few mils causing it to get stuck on the ejector clip preventing the trigger from resetting. It only happened when you fired it with live rounds too. Work just fine dry firing. Took me a while to find that one. I fixed that by rounding the corners on the trigger bar bracket. I hit it with some 1100 grit sandpaper to shine it up a bit and get it to slide in a little easier when installing

P938 (2012-09-10)

I read some things about possible using this in the Sig p938. I took the chance and replaced the plastic trigger in the P938 and this one works great. I have also read you can use this in the p238 as well.

Worsened the trigger in P238 (2014-11-08)

I think My upgraded trigger must have been overbored where the trigger spring goes, it seems to have slightly increased the amount of slop and creep, giving the P238 slightly more spongy feeling, and not as crisp as the stock plastic trigger.

I can hear the spring grating on the inside of the trigger as well, none of this happened with the stock plastic piece.

I'm leaving it in for now, to see how this performs at the range.

On a positive side note, trigger breaks at slightly lower weight now, but I didnt put up the trigger gauge pre or post.

Edit: removed the trigger, lubed up the spring and cleaned out the trigger spring area, seems to have improved the trigger and decreased sponginess, still not as crisp as stock though.

My Colt Mustang pocketlite serial no PL1147XX comes with anodized aluminum trigger and did not need to be replaced

Needs to be fit. (2017-08-11)

This is the third trigger that I have installed in a Mustang made by Cylinder and Slide.This one was the worst.The trigger bar slot had to be fit, the Spring hole had to be fit and the pivot hole had to be fit. I think their tooling has to be replaced.

Läs 8 fler betyg på brownells.com

649 649 1 SEK

Produktnr: 206000020
CYLINDER & SLIDE ALUMINUM COLT .380 TRIGGER
Tillverkarens produktnummer: CS311 000000003117 Långlivad, CNC-bearbetad, aluminiumavtryckare ersätter enkelt Colts fabrikstillverkade nylon/plastavtryckare för ökad hållbarhet och en mer solid känsla vid avtryck. Använd som en enskild förbättring eller som en del av ett komplett avtryckarjobb. Installationen kan kräva mindre modifieringar; eliminerar helt för tidigt slitage och brott på avtryckarens pivotstifthål.

649 SEK 0 649,00 kr *

Restorder. Skickas när den finns i lager. Leveranstid ca 4-12 veckor från centrallagret.

Funktioner: Finish: Silver Make: Colt Modell: Government, Mustang Stil: Grooved

Lägg till i inköpslista

Fråga om produkt

Information

Lägg till i inköpslista

Fråga om produkt

Top takeaways

Långlivad, CNC-bearbetad aluminiumavtryckare som ersätter Colts fabrikstillverkade nylon/plastavtryckare för ökad hållbarhet och en mer solid känsla vid avtryck.
Passar till Colt .380 Government och Mustang modeller, med en matt silver finish.
Installationen kan kräva mindre modifieringar men eliminerar helt för tidigt slitage och brott på avtryckarens pivotstifthål.

Produktinformation

Finish: Silver Make: Colt Modell: Government,Mustang Stil: Grooved Leveransvikt: 0,005kg Leveranshöjd: 5mm Leveransbredd: 79mm Leveranslängd: 155mm UPC : 000000003117

Produkt detaljer

Tillverkas i USA
USA: s exportklassificering: 0A501.c

Uppgradera din Colt .380 med en hållbar aluminiumavtryckare för bättre känsla och prestanda! ✨ Passar både Government och Mustang modeller.

Replaces The Plastic Factory Part For Better Wear, Improved "Feel"

SPECS: Aluminum, matte silver. Fits Colt .380 Government and Mustang models.

Mer...

Ersätter den plastiga fabriksdelen för bättre hållbarhet, förbättrad "känsla"

SPECS: Aluminium, matt silver. Passar till Colt .380 Government och Mustang modeller.

Mer...

Kundernas betyg påCYLINDER & SLIDE ALUMINUM COLT .380 TRIGGER

Antal betyg: 8
Från brownells.com: 8
Medelbetyg: 4,1

I would and did buy this product again (2010-04-21)

Fits perfect in my Sig P238. A great improvement to the factory nylon trigger.

THIS WILL FIT THE SIG P238! nice piece! (2012-03-07)

A lot better (2012-04-02)

Much better than the factory plastic junk trigger that brakes.

If you have a Colt 380 buy this now. (2012-04-06)

If you have a Colt 380 buy this now. The cheap plastic trigger that comes in the gun will brake some day. You do not what that to be the day you need it.

Works ok in a government pocketlight. (2012-07-27)

P938 (2012-09-10)

Worsened the trigger in P238 (2014-11-08)

Needs to be fit. (2017-08-11)

Läs 8 fler betyg på brownells.com

CYLINDER & SLIDE
COLT .380 ALUMINUM TRIGGER

Kundernas betyg påCYLINDER & SLIDE ALUMINUM COLT .380 TRIGGER

Top takeaways

Produktinformation

Produkt detaljer

Kundernas betyg påCYLINDER & SLIDE ALUMINUM COLT .380 TRIGGER

Anslut

Säkra betalningsmetoder

Branschorganisationer

Välkommen till oss!

CYLINDER & SLIDE COLT .380 ALUMINUM TRIGGER

Kundernas betyg påCYLINDER & SLIDE ALUMINUM COLT .380 TRIGGER

Top takeaways

Produktinformation

Produkt detaljer

Kundernas betyg påCYLINDER & SLIDE ALUMINUM COLT .380 TRIGGER

Anslut

Säkra betalningsmetoder

Branschorganisationer

Välkommen till oss!

CYLINDER & SLIDE
COLT .380 ALUMINUM TRIGGER