Varukorgen är tom.

Varukorg

Hjälp och kontakt

Fri frakt på beställningar över 2.999 kr

100 dagars returrätt

Nyhetsbrev

REA

Över 300 000 kunder - vi säger tack!

4,93/5 "Mycket bra" (1400+ recensioner)

40 000+ produkter inom jakt och skytte

BROWNELLS
CAR-15/M4 BUTTSTOCK WRENCH

050806006638 080000670

Solidly Engages The Receiver Extension Nut For Easy Installation & Removal Of Carbine Buttstocks

Dedicated wrench has four precision-machined teeth that ensure full, non-slip engagement of all four notches in an M4-type receiver extension nut for easy removal and installation of collapsible carbine buttstocks. Transfers all the torquing force to the nut for fast tightening or removal without risk of damage to nut, extension tube, or receiver caused by the wrench slipping. Includes the handy add-on features of our universal M4 buttstock tool: pry blade/screwdriver, ½" square torque drive opening, fixed stock receiver extension remover, and a convenient hole in the handle for hanging the wrench on a pegboard. Heavy duty steel construction, machined from a single piece of .312 thick steel, with a durable black oxide finish.

SPECS: Steel, hardened, black oxide finish. 7-1⁄8" (18.1cm) long. Fits current-model M4-type receiver extension nuts with four square notches.

Mer...

Säkert Grepp På Mottagare Förlängningsmuttern För Enkel Installation & Borttagning Av Karbinkolvar

Denna specialnyckel har fyra precisionsbearbetade tänder som säkerställer fullt, halkfritt grepp om alla fyra hacken i en M4-typ mottagare förlängningsmutter för enkel avlägsning och installation av kollapsbara karbin-kolvar. Överför all vridkraft till muttern för snabb åtdragning eller avlägsning utan risk för skador på mutter, förlängningstube eller mottagare orsakad av att nyckeln slinter. Inkluderar de praktiska tilläggsfunktionerna från vårt universella M4-kolvverktyg: brytblad/skruvmejsel, ½" kvadratisk vridmomentöppning, avlägsnare för fast lager mottagare förlängning, och ett bekvämt hål i handtaget för att hänga nyckeln på en verktygstavla. Kraftig stålkonstruktion, bearbetad från ett enda stycke .312 tjockt stål, med en hållbar svartoxiderad finish.

SPECS: Stål, härdad, svartoxiderad finish. 7-1⁄8" (18.1cm) lång. Passar nuvarande modell av M4-typ mottagare förlängningsmuttrar med fyra kvadratiska hack.

Mer...

Kundernas betyg påBROWNELLS M4 BUTTSTOCK WRENCH

Antal betyg: 13
Från brownells.com: 13
Medelbetyg: 4,5

M4 Buttstock Wrench (2009-08-07)

Got one. I work on lots of AR's. I like the four point fit on the stock nut. However, difficult to put on and handle is short. Hard to get leverage.

Full engagement is a big plus (2009-08-19)

Full engagement is a big plus, and Â½ inch torque wrench cut is nice to tighten to spec, easy to stabilize with torque wrench.

Miossi Gun Works LLC

Good wrench with limitations (2010-10-16)

Excellent wrench with 100% engagement on all 4-slots on the castle nut. Limitations are when working on a rifle with a Magpul ASAP on it. The wrench cannot fully engage the castle nut because of interference with the ASAP plate.

I like this wrench to break loose a heavily staked castle nut because it engages all four contact points.

Great Tool Must Have (2011-09-05)

I teach AR-15 armorers classes. Great tool. Handle needs to be longer without the sharp end. Will break staked castle nuts and red loctite loose. A must for an AR-15 Armorer.

Best AR buttstock wrench available... (2012-02-07)

This is the best AR buttstock castle nut wrench available, bar none. Extremely well built, heavy duty, 4 point wrench. Probably overkill for a one time use type of wrench, but if you want the best here it is. Requires removal of the collapsible stock to use the wrench on the castle nut, but that's not a big deal. The open side of the wrench will slide down the buffer tube but not over it, so you have to pull the butt stock off the tube first. If you are a gun builder or just want the best tools in your box this Brownell's wrench is the right wrench for you. If you only need to use the wrench once then one of the cheaper Tapco would probably be enough.
Highly recommended.

Great tool (2012-07-02)

Great tool. Handle a little short. Works best with an added extention.

Great wrench (2012-08-13)

This Brownells carbine wrench is the best I have ever used. Being an M16/M4 armorer for years I have used a few. This one is strong, and has not failed. I had one I thought would never come off without heat or worse, and my new wrench did the job. Spendy, but worth the one time cost.

Great Tool (2013-09-18)

We work on rifles every day, after wearing out some other tools we came across this one. Wish we would have found it earlier. Makes the job much easier. Only down side is having to take stock off but not a big dea.

Buttstock installation must (2013-12-05)

If you're building ARs, you need this wrench. Put down your crescent wrench and slip-joint pliers and use this instead.

does not work with all buffer tubes (2014-12-23)

This wrench does not fit over all buffer tubes. The phase 5 buffer tube does not allow for the wrench to slide down to the castle nut. This is a nice tool but is a little sharp on the hands. All in all it is well made, just the nature of its construction does not make it very versitile.

Right tool for the job! (2015-01-09)

If you really want to do the job right the first time and not risk damaging the finish to your valuable investment then this is the only product worth looking at. Yes, costs more than 2X the budget wrenches but wow, it is so super-solid you will have no qualms about using this on your firearm. The 4-tooth design locks squarely on the castle nut and make removal of a stubborn castle nut safe and easy. Could use a longer handle, but I fit a length of pipe over the end for leverage on a very tightly locked on nut and voilÃ¡ -- no damage to the nut or tube. Not even a mark on the castle nut where the wrench teeth fit. Glad I bought it and did it right the first time. Thanks Brownells!

3rd time is the charm (2015-08-03)

This is my 3rd wrench. Too bad it wasn't the first. Fits both Stag and DPMS nuts. It's short, but I think that is by design. Longer might lead to over-torquing. By being short, it encourages me to use a torque wrench for leverage.

The right tool for the job (2017-03-01)

Very thick steel. This is what you want to remove those castle nut especially those that were staked by Colt. Can also be used on rifle receiver extension plus what's nice is there's a 1/2" drive for torque wrench. Not all receiver extension wrenches will have it. I really liked the 4 notches of the wrench how thick they were made really extending more on the notches of the castle nut. Get it and you'll be glad you did!

Läs 13 fler betyg på brownells.com

1299 1299 1 SEK

Produktnr: 080000670
BROWNELLS M4 BUTTSTOCK WRENCH
Tillverkarens produktnummer: 100254 050806006638 Denna specialnyckel har fyra precisionsbearbetade tänder som säkerställer fullt, halkfritt grepp om alla fyra hacken i en M4-typ mottagare förlängningsmutter för enkel avlägsning och installation av kollapsbara karbin-kolvar. Överför all vridkraft till muttern för snabb åtdragning eller avlägsning utan risk för skador på mutter, förlängningstube eller mottagare orsakad av att nyckeln slinter. Inkluderar de praktiska tilläggsfunktionerna från vårt universella M4-kolvverktyg: brytblad/skruvmejsel, ½" kvadratisk vridmomentöppning, avlägsnare för fast lager mottagare förlängning, och ett bekvämt hål i handtaget för att hänga nyckeln på en verktygstavla. Kraftig stålkonstruktion, bearbetad från ett enda stycke .312 tjockt stål, med en hållbar svartoxiderad finish.

1299 SEK 75 1 299,00 kr *

Levernastid ca. 14-21 dagar.
Mer än 10 st. i centrallagret.

Funktioner: Make: AR-15

Lägg till i inköpslista

Fråga om produkt

Information

Lägg till i inköpslista

Fråga om produkt

Top takeaways

Specialnyckel med fyra precisionsbearbetade tänder för säkert grepp om M4-typ mottagare förlängningsmutter.
Inkluderar extra funktioner som brytblad/skruvmejsel och ½" kvadratisk vridmomentöppning.
Tillverkad av kraftigt stål med hållbar svartoxiderad finish, bearbetad från ett enda stycke .312 tjockt stål.

Produktinformation

Make: AR-15 Leveransvikt: 0,249kg Leveranshöjd: 5mm Leveransbredd: 102mm Leveranslängd: 246mm UPC : 050806006638

Produkt detaljer

Tillverkas i USA

Ansvarig ekonomisk aktör enligt EU-förordningen

Brownells Sverige AB
Box 99
793 22 Leksand
Sverige
info@brownells.se

Upptäck CAR-15/M4 Buttstock Wrench från Brownells! 🔧 Perfekt för enkel installation och avlägsnande av M4-kolvar med precision och hållbarhet.

Solidly Engages The Receiver Extension Nut For Easy Installation & Removal Of Carbine Buttstocks

SPECS: Steel, hardened, black oxide finish. 7-1⁄8" (18.1cm) long. Fits current-model M4-type receiver extension nuts with four square notches.

Mer...

Säkert Grepp På Mottagare Förlängningsmuttern För Enkel Installation & Borttagning Av Karbinkolvar

SPECS: Stål, härdad, svartoxiderad finish. 7-1⁄8" (18.1cm) lång. Passar nuvarande modell av M4-typ mottagare förlängningsmuttrar med fyra kvadratiska hack.

Mer...

Kundernas betyg påBROWNELLS M4 BUTTSTOCK WRENCH

Antal betyg: 13
Från brownells.com: 13
Medelbetyg: 4,5

M4 Buttstock Wrench (2009-08-07)

Got one. I work on lots of AR's. I like the four point fit on the stock nut. However, difficult to put on and handle is short. Hard to get leverage.

Full engagement is a big plus (2009-08-19)

Full engagement is a big plus, and Â½ inch torque wrench cut is nice to tighten to spec, easy to stabilize with torque wrench.

Miossi Gun Works LLC

Good wrench with limitations (2010-10-16)

Great Tool Must Have (2011-09-05)

I teach AR-15 armorers classes. Great tool. Handle needs to be longer without the sharp end. Will break staked castle nuts and red loctite loose. A must for an AR-15 Armorer.

Best AR buttstock wrench available... (2012-02-07)

Great tool (2012-07-02)

Great tool. Handle a little short. Works best with an added extention.

Great wrench (2012-08-13)

Great Tool (2013-09-18)

Buttstock installation must (2013-12-05)

If you're building ARs, you need this wrench. Put down your crescent wrench and slip-joint pliers and use this instead.

does not work with all buffer tubes (2014-12-23)

Right tool for the job! (2015-01-09)

3rd time is the charm (2015-08-03)

The right tool for the job (2017-03-01)

Läs 13 fler betyg på brownells.com

Alternativ

BROWNELLS

BROWNELLS AR-15/M16/M4 BUTTSTOCK TOOL
AR-15/M16/M4 BUTTSTOCK TOOL

Kolv Verktyg

Order kan placeras

999,00 kr

BROWNELLS
CAR-15/M4 BUTTSTOCK WRENCH

Kundernas betyg påBROWNELLS M4 BUTTSTOCK WRENCH

Top takeaways

Produktinformation

Produkt detaljer

Ansvarig ekonomisk aktör enligt EU-förordningen

Kundernas betyg påBROWNELLS M4 BUTTSTOCK WRENCH

Anslut

Säkra betalningsmetoder

Branschorganisationer

Välkommen till oss!

BROWNELLS CAR-15/M4 BUTTSTOCK WRENCH

Kundernas betyg påBROWNELLS M4 BUTTSTOCK WRENCH

Top takeaways

Produktinformation

Produkt detaljer

Ansvarig ekonomisk aktör enligt EU-förordningen

Kundernas betyg påBROWNELLS M4 BUTTSTOCK WRENCH

Anslut

Säkra betalningsmetoder

Branschorganisationer

Välkommen till oss!

BROWNELLS
CAR-15/M4 BUTTSTOCK WRENCH