Lightweight, aluminum Picatinny rail replaces factory rib/rear sight and lets you mount an optic while retaining the benefit of backup âironâ sights. Eight cross-slots let you position the optic for best eye relief. Integral open rear sight adjusts for windage and elevation. Drilled to fit the factory hole spacing and use the original factory rib/rear sight screws.
SPECS: 6061 T6 aluminum, hardcoat anodized, matte black. Approximately 5" (12.7cm) long, 13⁄16" (21mm) wide, 15⁄32" (12mm) high from top of receiver.
Mer...
Montera ett sikte & BehÄll JÀrnsikten
LÀttvikts, aluminium Picatinny-skena ersÀtter fabriksribban/baksiktet och lÄter dig montera en optik samtidigt som du behÄller fördelen med backup "jÀrnsikten". à tta tvÀrgÄende spÄr lÄter dig positionera optiken för bÀsta ögonavlastning. Integrerat öppet baksikte justerbart för vind och höjd. Borrat för att passa fabrikens hÄlavstÄnd och anvÀnda de ursprungliga fabriksskruvarna för ribban/baksiktet.
Kundernas betyg pÄTACTICAL SOLUTIONS, LLC PICATINNY SCOPE MOUNT
Antal betyg: 3
FrÄn brownells.com: 3
Medelbetyg: 4,7
Buckmark Tactical Solutions Rail(2011-02-24)
Great fit and finish. Works Perfectly. Highly reccomended for adding optic onto Buck Mark.
Awesome Rail(2011-06-02)
I put a Burris Fastfire II on mine and I love it. It is durable and rugged.
great rail, but no fiber optic options(2013-01-30)
I ordered this rail with the intention of adding a pistol scope. For that purpose, it is superb. Great build quality, solid. The built-in rear sight is nice... but that was a problem for me. I wanted to install Williams Fire Sights (Front and Rear) on my Buckmark. The Williams Rear sights will not fit on the TacSol rail. TacSol uses it's own rear sight setup that is not compatible with the original sight. So, my original goal of scoping the Buckmark is accomplished by this rail, but my secondary goal of having fiber optic backup sights was not accomplished. As far as I can tell as of this writing (1/30/13), there are no options for a fiber optic rear sight that will fit on the TacSol rail. Apparently, someone has successfully modified a cheap SunOptics BM rail to accept the Williams rear fiber optic sight. That rail goes for $12, so I may return the TacSol rail and go with the SunOptics rail. Also, I noticed that my rings tend to slide to and fro with the TacSol rail. The rings are tightened very well such that they don't slide side to side, but they do move a tad to and fro. I don't know if that is an issue with the TacSol rail or with my rings. I'm guessing the rings, becuase they were cheap rings. I like the rail a lot, but the proprietary rear sight is a real loser for me (not that it doesn't work, but just because fiber optics are not an option).
Lightweight, aluminum Picatinny rail replaces factory rib/rear sight and lets you mount an optic while retaining the benefit of backup âironâ sights. Eight cross-slots let you position the optic for best eye relief. Integral open rear sight adjusts for windage and elevation. Drilled to fit the factory hole spacing and use the original factory rib/rear sight screws.
SPECS: 6061 T6 aluminum, hardcoat anodized, matte black. Approximately 5" (12.7cm) long, 13⁄16" (21mm) wide, 15⁄32" (12mm) high from top of receiver.
Mer...
Montera ett sikte & BehÄll JÀrnsikten
LÀttvikts, aluminium Picatinny-skena ersÀtter fabriksribban/baksiktet och lÄter dig montera en optik samtidigt som du behÄller fördelen med backup "jÀrnsikten". à tta tvÀrgÄende spÄr lÄter dig positionera optiken för bÀsta ögonavlastning. Integrerat öppet baksikte justerbart för vind och höjd. Borrat för att passa fabrikens hÄlavstÄnd och anvÀnda de ursprungliga fabriksskruvarna för ribban/baksiktet.
Kundernas betyg pÄTACTICAL SOLUTIONS, LLC PICATINNY SCOPE MOUNT
Antal betyg: 3
FrÄn brownells.com: 3
Medelbetyg: 4,7
Buckmark Tactical Solutions Rail(2011-02-24)
Great fit and finish. Works Perfectly. Highly reccomended for adding optic onto Buck Mark.
Awesome Rail(2011-06-02)
I put a Burris Fastfire II on mine and I love it. It is durable and rugged.
great rail, but no fiber optic options(2013-01-30)
I ordered this rail with the intention of adding a pistol scope. For that purpose, it is superb. Great build quality, solid. The built-in rear sight is nice... but that was a problem for me. I wanted to install Williams Fire Sights (Front and Rear) on my Buckmark. The Williams Rear sights will not fit on the TacSol rail. TacSol uses it's own rear sight setup that is not compatible with the original sight. So, my original goal of scoping the Buckmark is accomplished by this rail, but my secondary goal of having fiber optic backup sights was not accomplished. As far as I can tell as of this writing (1/30/13), there are no options for a fiber optic rear sight that will fit on the TacSol rail. Apparently, someone has successfully modified a cheap SunOptics BM rail to accept the Williams rear fiber optic sight. That rail goes for $12, so I may return the TacSol rail and go with the SunOptics rail. Also, I noticed that my rings tend to slide to and fro with the TacSol rail. The rings are tightened very well such that they don't slide side to side, but they do move a tad to and fro. I don't know if that is an issue with the TacSol rail or with my rings. I'm guessing the rings, becuase they were cheap rings. I like the rail a lot, but the proprietary rear sight is a real loser for me (not that it doesn't work, but just because fiber optics are not an option).