Över 300 000 kunder - vi säger tack!

40 000+ produkter inom jakt och skytte

812526023834 430106543
BCM® A/T™ Optic Mounts Capability in the face of the unexpected and catastrophic, the BCM A/T Mount is built in anticipation of a “no fail” shot that will save another human life. PERFORMANCE WITHOUT PEER Improving on Mil-Spec rail interfaces dating back over 30 years, the BCM A/T mount delivers unprecedented zero retention on a properly mounted red dot optic. Low profile and snag-free, BCM A/T Mounts are built with a minimal number of components - delivering a stronger component with less points of failure, ready to take on dynamic and adverse settings. Each A/T Mount features multiple integral recoil lugs to mitigate recoil and counter recoil to preserve your zero and ensure “no fail” shots are placed where intended by the trained rifleman. Starting at 2.15 oz, each 7075T6 billet mount is hard coat anodized per Mil-A-8625F. Additionally, both the steel alloy clamp and nut are hardened with Nitride coating. THE ANGLED TORQUE™ LOCK-UP A/T (Angled Torque) mounts employ angled torque through a patented* clamp which applies triangulating force to create a stronger and more reliable lock up of the mount onto the end user’s rail. To retain the hardware in field conditions, this system uses a serrated locking spring-washer to prevent the loss of torque on the shaft nut. With an equivalent load applied, the A/T Mount delivers approximately twice the clamping force at the picatinny rail, versus a legacy horizontal interface. * US Patent D973.826, and other patents pending THE FLEET The A/T fleet is built optimized for both a variety of missions and proven red dot optics. Aimpoint® T-2, T-1 and CompM5 series: The Marksman lower 1/3 co-witness The Close Combat 1.93” Trijicon® MRO® The Marksman lower 1/3 co-witness The Close Combat 1.93” MADE IN AMERICA All BCM components and accessories unite state of the art manufacturing with lightweight and durable materials to ensure components that last a lifetime, performing far beyond performance requirements established nearly six decades ago. Aimpoint, T-2, T-1, CompM5 trademarks are property of Aimpoint Inc. Trijicon, MRO trademarks are property of Trijicon Inc.
2099 2099 4 SEK
Produktnr: 430106543
BRAVO COMPANY BCM LOWER 1/3 AT OPTIC MOUNT FOR AIMPOINT MICRO T2
Tillverkarens produktnummer: BCM-OM-AT-21 812526023834
2099 SEK 2 2 099,00 kr *
Levernastid ca. 14-21 dagar.
2 st. i centrallagret.
Funktioner: Fits / Used For: Aimpoint Micro T1 Färg: Svart

Produktinformation

Fits / Used For: Aimpoint Micro T1 Färg: Svart Leveransvikt: 0,454kg Leveranshöjd: 70mm Leveransbredd: 95mm Leveranslängd: 114mm UPC : 812526023834

Produkt detaljer

Tillverkas i USA



Produktnr: 430106544
BRAVO COMPANY BCM 1.93" AT OPTIC MOUNT FOR AIMPOINT MICRO T2
Tillverkarens produktnummer: BCM-OM-AT-22 812526023841
2099 SEK 7 2 099,00 kr *
Levernastid ca. 14-21 dagar.
7 st. i centrallagret.
Funktioner: Fits / Used For: Aimpoint Micro T1 Färg: Svart Höjd: 1.93''
Produktnr: 430106545
BRAVO COMPANY BCM LOWER 1/3 AT OPTIC MOUNT FOR TRIJICON MRO
Tillverkarens produktnummer: BCM-OM-AT-271 812526023858
2099 SEK 4 2 099,00 kr *
Levernastid ca. 14-21 dagar.
4 st. i centrallagret.
Funktioner: Fits / Used For: Trijicon MRO Färg: Svart
Produktnr: 430106546
BRAVO COMPANY BCM 1.93" AT OPTIC MOUNT FOR TRIJICON MRO
Tillverkarens produktnummer: BCM-OM-AT-272 812526023865
2099 SEK 8 2 099,00 kr *
Levernastid ca. 14-21 dagar.
8 st. i centrallagret.
Funktioner: Fits / Used For: Trijicon MRO Färg: Svart Höjd: 1.93''
BCM® A/T™ Optic Mounts Capability in the face of the unexpected and catastrophic, the BCM A/T Mount is built in anticipation of a “no fail” shot that will save another human life. PERFORMANCE WITHOUT PEER Improving on Mil-Spec rail interfaces dating back over 30 years, the BCM A/T mount delivers unprecedented zero retention on a properly mounted red dot optic. Low profile and snag-free, BCM A/T Mounts are built with a minimal number of components - delivering a stronger component with less points of failure, ready to take on dynamic and adverse settings. Each A/T Mount features multiple integral recoil lugs to mitigate recoil and counter recoil to preserve your zero and ensure “no fail” shots are placed where intended by the trained rifleman. Starting at 2.15 oz, each 7075T6 billet mount is hard coat anodized per Mil-A-8625F. Additionally, both the steel alloy clamp and nut are hardened with Nitride coating. THE ANGLED TORQUE™ LOCK-UP A/T (Angled Torque) mounts employ angled torque through a patented* clamp which applies triangulating force to create a stronger and more reliable lock up of the mount onto the end user’s rail. To retain the hardware in field conditions, this system uses a serrated locking spring-washer to prevent the loss of torque on the shaft nut. With an equivalent load applied, the A/T Mount delivers approximately twice the clamping force at the picatinny rail, versus a legacy horizontal interface. * US Patent D973.826, and other patents pending THE FLEET The A/T fleet is built optimized for both a variety of missions and proven red dot optics. Aimpoint® T-2, T-1 and CompM5 series: The Marksman lower 1/3 co-witness The Close Combat 1.93” Trijicon® MRO® The Marksman lower 1/3 co-witness The Close Combat 1.93” MADE IN AMERICA All BCM components and accessories unite state of the art manufacturing with lightweight and durable materials to ensure components that last a lifetime, performing far beyond performance requirements established nearly six decades ago. Aimpoint, T-2, T-1, CompM5 trademarks are property of Aimpoint Inc. Trijicon, MRO trademarks are property of Trijicon Inc.
Tillbaka till toppen