Varukorgen är tom.

Varukorg

Hjälp och kontakt

Fri frakt på beställningar över 2.999 kr

100 dagars returrätt

Nyhetsbrev

REA

Över 300 000 kunder - vi säger tack!

4,93/5 "Mycket bra" (1400+ recensioner)

40 000+ produkter inom jakt och skytte

D&H INDUSTRIES
AR 308 MAGAZINES

850012639183 100023925

SR25 Pattern 308 Magazine chambered in .308. The magazine body is made from steel and available in either 10 (Orange Follower) or 20 (Green Follower) rounds.

Mer...

SR25-mönstrad 308-magasin kalibrerad för .308. Magasinkroppen är tillverkad av stål och finns tillgänglig antingen med 10 (med orange markör) eller 20 (med grön markör) skotts kapacitet.

Mer...

Kundernas betyg påD&H INDUSTRIES SR25 PATTERN 308 STEEL MAGAZINE 20RD BLACK

Antal betyg: 8
Från brownells.com: 8
Medelbetyg: 3,8

Works fine in my PA-10 gen2 (2017-12-28)

Bought one to give it a go in my newest toy (Palmeto State Armory gen 2 PA-10). So far zero issues, boring like its suppose to be in other words. It drops free and the bolt holds open on last round. Finish is actually rather nice. Who knows how it holds up long term but so far so good. The thing seems solid in a brick like fashion. The only draw back for me is that it is noticeably heavier than say, a 20 round Pmag while at the same time taking up way less vertical space.

Bottom line.... Good looking, functional mag that seems tough, while weighing a couple ounces more than the biggest plastic competitor. Ya, I'm buying more for my PA-10.

works in Galil ACE and PSA G2 in 7.62x51 (2018-03-17)

If you want steel feed lips the D&H 20rd mag is 7 oz and Lancer LWM 20rd is 6 oz.

D&H has functioned fine and is half the cost of a Lancer mag.

awesome mags ! (2018-04-09)

These mags are burly , they DO hold 20 and they DO load on a closed bolt when loaded with 20 rounds. Orange follower is easy to see in the dark recesses of the upper receiver . Just shy of 9 ounces.....labeled viewing holes cut in the body of the mag ...10,15 and 20........what is not to like ?

<img width="500" src='/userdocs/reviewimages/d7fe7d87-b073-4fac-8f04-ca75eac8b326.jpg' alt=''>

Great but with a hitch (2018-04-25)

This magazines issue isn't the magazines fault, I have an Armalite AR-10A and the magazines are TIGHT in the mag well, as in non-dropfree tight. Again, not the fault of the magazine, just the variation of different rifle manufacturers.

Does Not Fit DPMS RFLR G2B24 (2018-04-28)

I have a DPMS RFLR G2B24. I bought one of these to evaluate since the ones with the light green follower are no longer available; those fit the rifle without any problems. This one requires too much force to insert it into the magazine well; itâs just too tight. Removal is very difficult; it does not fall free.

I should mention that I bought one of the 10 round versions of the magazine and that one fits the rifle without any problems. It inserts easily and falls free when the magazine release is pressed.

The overall construction is excellent. It has an orange, anti-tilt follower and holes to view the approximate number of cartridges. The magazine is 3/8â longer than the previous model with the light green follower. Unfortunately, the magazine I received is missing the right forward follower stop, i.e. broken off. The stop is about half the size of the model with the light green follower and may be an indication of a design flaw that makes it too fragile and subject to failure.

Returned for credit.

They fall out (2018-10-07)

I bought 3 of these mags FOR AN AR-10. My advice...DON'T BUY THEM!!!

Your wasting your money. When the rifle is fired they just fall out. Happens every time I pull the trigger. Then I found that I can just pull them out of the weapon without pressing the release button. At first I thought just one had the problem but after testing all 3 they all pull out with only slight effort. They all seat and the catch settles into the retaining hole but with a little pull and a wiggle they just come right out. I thought that the mag retainer had a problem so I tested all my PMAGS. Not one of them failed.

DON'T PURCHASE THEM!!!!

Solid Construction (2017-02-15)

I love this solid steel construction!!!

Satisfied (2018-08-07)

Fits great in my anodize Noreen lower. Freely drops out when called to do so. Holds bolt back on last round fires. When filled to capacity, I can push it in on a closed bolt. Good bench shooting mag. Dependable so far.

Läs 8 fler betyg på brownells.com

469 479 2 SEK

Produktnr: 100023925
D&H INDUSTRIES SR25 PATTERN 308 STEEL MAGAZINE 20RD BLACK
Tillverkarens produktnummer: DHT-11848-RT 850012639183 SR25-mönstrad 308-magasin kalibrerad för .308. Magasinkroppen är tillverkad av stål och finns tillgänglig antingen med 10 (med orange markör) eller 20 (med grön markör) skotts kapacitet.

469 SEK 371 469,00 kr *

Leveranstid ca. 14-21 dagar.
Mer än 10 st. i centrallagret.

Funktioner: Finish: Svart Kapacitet: 20-Round Make: AR .308 Material: Stål Patron: 308 Winchester Mängd: 1

Lägg till i inköpslista

Fråga om produkt

Information

Lägg till i inköpslista

Fråga om produkt

Köpinformation

Tillstånd Krävs (Vid köp av högkapacitetsmagasin krävs licenskontroll. E-posta eller posta en kopia på din licens (båda sidor) och ID-handling.

Vid köp av licenspliktiga vapendelar krävs tillstånd - Handlartillstånd eller Inköpstillstånd (Handlartillstånd eller Inköpstillstånd från polisen måste postas till oss. Licenspliktiga vapendelar skickas inte förrän vi har erhållit tillståndet.))

Produktinformation

Finish: Svart Kapacitet: 20-Round Make: AR .308 Material: Stål Patron: 308 Winchester Leveransvikt: 0,236kg Leveranshöjd: 25mm Leveransbredd: 76mm Leveranslängd: 140mm UPC : 850012639183

Produkt detaljer

Tillverkas i USA
USA: s exportklassificering: 0A501.d

Ansvarig ekonomisk aktör enligt EU-förordningen

Brownells Sverige AB
Box 99
793 22 Leksand
Sverige
info@brownells.se

Produktnr: 100022696
D&H INDUSTRIES 6.5 CREEDMOOR/.308 MAGAZINE 10-RD STEEL BLACK
Tillverkarens produktnummer: DHT-12132-RT 766897411304 SR25-mönstrad 308-magasin kalibrerad för .308. Magasinkroppen är tillverkad av stål och finns tillgänglig antingen med 10 (med orange markör) eller 20 (med grön markör) skotts kapacitet.

479 SEK 95 479,00 kr *

Levernastid ca. 14-21 dagar.
Mer än 10 st. i centrallagret.

Funktioner: Finish: Svart Kapacitet: 10-Round Make: AR .308 Material: Stål Patron: 308 Winchester Mängd: 1

Lägg till i inköpslista

Fråga om produkt

Information

Lägg till i inköpslista

Fråga om produkt

Upptäck D&H Industries SR25-mönstrad 308-magasin med 20 skott. 🛠️ Hållbar stålbyggnad för pålitlig prestanda!

SR25 Pattern 308 Magazine chambered in .308. The magazine body is made from steel and available in either 10 (Orange Follower) or 20 (Green Follower) rounds.

Mer...

SR25-mönstrad 308-magasin kalibrerad för .308. Magasinkroppen är tillverkad av stål och finns tillgänglig antingen med 10 (med orange markör) eller 20 (med grön markör) skotts kapacitet.

Mer...