Extra Power For Smoother, Quieter, More Reliable Cycling
Precision centerless ground and polished operating springs offer a smoother and quieter operation in AR buffer tubes. Improved impulse feel results in faster sight recovery and improved reliability. Outer-diameter is ground and polished for smooth, quiet movement in the buffer tube. Rifle fits fixed stock rifles with A1/A2 buffer tube. Carbine fits collapsible M4-type carbine-length buffer tube. 308 Rifle – Fits AR10 and 308 AR fixed stock rifles with an A1/A2 buffer tube. 308 Carbine – fits AR10 and 308 AR carbine buffer tubes. JP Enterprises recommends the use of JP Tuned and Polished 308 Buffer Springs when using the JP 308 Low Mass Bolt Carrier Group
Extra kraft för mjukare, tystare och mer tillförlitlig cykling
Precisionsslipade och polerade driftsfjädrar erbjuder en mjukare och tystare funktion i AR buffer-rör. Förbättrad impulsupplevelse resulterar i snabbare siktesåterhämtning och ökad tillförlitlighet. Yttre diameter är slipad och polerad för en mjuk, tyst rörelse i buffer-röret. Rifle passar fasta stockgevär med A1/A2 buffer-rör. Karbin passar kollapsbara M4-typ karbinlängd buffer-rör. 308 Rifle – Passar AR10 och 308 AR fasta stockgevär med ett A1/A2 buffer-rör. 308 Karbin – passar AR10 och 308 AR karbin buffer-rör. JP Enterprises rekommenderar användning av JP Tuned and Polished 308 Buffer Springs när du använder JP 308 Low Mass Bolt Carrier Group
Kundernas betyg påJ P ENTERPRISES TUNED BUFFER SPRING, RIFLE
Antal betyg: 11
Från brownells.com: 11
Medelbetyg: 4,9
IT WORKS!(2017-04-28)
Built an AR308 with a standard 308 carbine buffer spring in a Magpul CTR stock. Would only lock back the bolt carrier about 50% of the time after the last round. Installed this spring and now get lock back after the last round 100%. Used a standard 3.7oz buffer both times. Problem solved!
308 Rifle Flat-Wire Buffer Spring(2014-03-22)
I replaced the factory round buffer spring in a new Remington R-25, 7MM-08 with this buffer spring because of multiple feeding and extraction problems. I fired 100 rounds, fast and slow, without any malfunctions what-so-ever.
Excellent Product(2012-02-20)
In Canada, we can buy Norinco AR's. Although well built, the finer points are missed. One of those is final fit/finish/quality on some things. Gun worked great, but adding this, smooth consistent cycling, and the brass all went in the same area. It did minimize the buffer tube noise as well.
No more ringing sound at all - amazing(2012-04-03)
Installed this spring with a tiny bit of grease for lubrication, and it works amazing. Just as promised. Gun feels nice and solid when I shoot it, and I don't feel or hear any of the spring action anymore. I ran this with a spikes heavy buffer.
Nice!(2013-11-18)
I've used this spring in multiple carbine builds and a pistol; both in conjunction with standard, H2 and Spike's T2 buffers. Never had any issue with cycling. A top quality upgrade.
Great part(2015-03-26)
Great product, great price. Highly recommended.
Works well, but short life.(2018-07-16)
Very nice part, but low life expectancy. Did not see anything on JP's site or anyone mention on here, but on the card I got with the spring the recommended replacement is only 5,000 rds. I don't consider my self to shoot much, but 5k rds comes quick and was disappointed to see that after I got it. That said it works very comparably to the flat springs I have and have yet to hear any spring noise when firing.
Great Spring(2012-04-04)
I use this spring with the AR-Restor buffer. It has tamed my .50 Beowulf more than I thought possible!
Great buy(2014-02-04)
Excellent spring, takes alot of the "chung" out of the action. The extra power of this spring really drives the bolt home.
These work(2016-01-31)
Have used these springs in my own rifles, installed in customers rifles, never had a complaint. Just ordered a couple more to have them in stock.
Quiet (2016-08-24)
I have liked shooting AR's, but always hated the "boing" and rattle. When I built my own, I decided to eliminate those noises. Between the Spikes Tactical tungsten buffer and a JP Enterprises tuned spring, the only mechanical noise is from the bolt movement. Pure joy!
Produktnr: 452000118 J P ENTERPRISES TUNED BUFFER SPRING, RIFLE Tillverkarens produktnummer: JPS-OSR812872020907 Precisionsslipade och polerade driftsfjädrar erbjuder en mjukare och tystare funktion i AR buffer-rör. Förbättrad impulsupplevelse resulterar i snabbare siktesåterhämtning och ökad tillförlitlighet. Yttre diameter är slipad och polerad för en mjuk, tyst rörelse i buffer-röret. Rifle passar fasta stockgevär med A1/A2 buffer-rör. Karbin passar kollapsbara M4-typ karbinlängd buffer-rör. 308 Rifle – Passar AR10 och 308 AR fasta stockgevär med ett A1/A2 buffer-rör. 308 Karbin – passar AR10 och 308 AR karbin buffer-rör. JP Enterprises rekommenderar användning av JP Tuned and Polished 308 Buffer Springs när du använder JP 308 Low Mass Bolt Carrier Group
489SEK5489,00 kr
*
Levernastid ca. 14-21 dagar. 5 st. i centrallagret.
Produktnr: 452000119 J P ENTERPRISES TUNED BUFFER SPRING, CARBINE Tillverkarens produktnummer: JPS-OSC812872020921 Precisionsslipade och polerade driftsfjädrar erbjuder en mjukare och tystare funktion i AR buffer-rör. Förbättrad impulsupplevelse resulterar i snabbare siktesåterhämtning och ökad tillförlitlighet. Yttre diameter är slipad och polerad för en mjuk, tyst rörelse i buffer-röret. Rifle passar fasta stockgevär med A1/A2 buffer-rör. Karbin passar kollapsbara M4-typ karbinlängd buffer-rör. 308 Rifle – Passar AR10 och 308 AR fasta stockgevär med ett A1/A2 buffer-rör. 308 Karbin – passar AR10 och 308 AR karbin buffer-rör. JP Enterprises rekommenderar användning av JP Tuned and Polished 308 Buffer Springs när du använder JP 308 Low Mass Bolt Carrier Group
499SEK10499,00 kr
*
Levernastid ca. 14-21 dagar. Mer än 10 st. i centrallagret.
Produktnr: 452000151 J P ENTERPRISES TUNED AND POLISHED BUFFER SPRING, 308 RIFLE Tillverkarens produktnummer: JPS-OSR.308812872020914 Precisionsslipade och polerade driftsfjädrar erbjuder en mjukare och tystare funktion i AR buffer-rör. Förbättrad impulsupplevelse resulterar i snabbare siktesåterhämtning och ökad tillförlitlighet. Yttre diameter är slipad och polerad för en mjuk, tyst rörelse i buffer-röret. Rifle passar fasta stockgevär med A1/A2 buffer-rör. Karbin passar kollapsbara M4-typ karbinlängd buffer-rör. 308 Rifle – Passar AR10 och 308 AR fasta stockgevär med ett A1/A2 buffer-rör. 308 Karbin – passar AR10 och 308 AR karbin buffer-rör. JP Enterprises rekommenderar användning av JP Tuned and Polished 308 Buffer Springs när du använder JP 308 Low Mass Bolt Carrier Group
549SEK4549,00 kr
*
Levernastid ca. 14-21 dagar. 4 st. i centrallagret.
Produktnr: 452000152 J P ENTERPRISES TUNED AND POLISHED BUFFER SPRING, 308 CARBINE Tillverkarens produktnummer: JPS-OSC.308812872020938 Precisionsslipade och polerade driftsfjädrar erbjuder en mjukare och tystare funktion i AR buffer-rör. Förbättrad impulsupplevelse resulterar i snabbare siktesåterhämtning och ökad tillförlitlighet. Yttre diameter är slipad och polerad för en mjuk, tyst rörelse i buffer-röret. Rifle passar fasta stockgevär med A1/A2 buffer-rör. Karbin passar kollapsbara M4-typ karbinlängd buffer-rör. 308 Rifle – Passar AR10 och 308 AR fasta stockgevär med ett A1/A2 buffer-rör. 308 Karbin – passar AR10 och 308 AR karbin buffer-rör. JP Enterprises rekommenderar användning av JP Tuned and Polished 308 Buffer Springs när du använder JP 308 Low Mass Bolt Carrier Group
549SEK15549,00 kr
*
Levernastid ca. 14-21 dagar. Mer än 10 st. i centrallagret.
Extra Power For Smoother, Quieter, More Reliable Cycling
Precision centerless ground and polished operating springs offer a smoother and quieter operation in AR buffer tubes. Improved impulse feel results in faster sight recovery and improved reliability. Outer-diameter is ground and polished for smooth, quiet movement in the buffer tube. Rifle fits fixed stock rifles with A1/A2 buffer tube. Carbine fits collapsible M4-type carbine-length buffer tube. 308 Rifle – Fits AR10 and 308 AR fixed stock rifles with an A1/A2 buffer tube. 308 Carbine – fits AR10 and 308 AR carbine buffer tubes. JP Enterprises recommends the use of JP Tuned and Polished 308 Buffer Springs when using the JP 308 Low Mass Bolt Carrier Group
Extra kraft för mjukare, tystare och mer tillförlitlig cykling
Precisionsslipade och polerade driftsfjädrar erbjuder en mjukare och tystare funktion i AR buffer-rör. Förbättrad impulsupplevelse resulterar i snabbare siktesåterhämtning och ökad tillförlitlighet. Yttre diameter är slipad och polerad för en mjuk, tyst rörelse i buffer-röret. Rifle passar fasta stockgevär med A1/A2 buffer-rör. Karbin passar kollapsbara M4-typ karbinlängd buffer-rör. 308 Rifle – Passar AR10 och 308 AR fasta stockgevär med ett A1/A2 buffer-rör. 308 Karbin – passar AR10 och 308 AR karbin buffer-rör. JP Enterprises rekommenderar användning av JP Tuned and Polished 308 Buffer Springs när du använder JP 308 Low Mass Bolt Carrier Group
Kundernas betyg påJ P ENTERPRISES TUNED BUFFER SPRING, RIFLE
Antal betyg: 11
Från brownells.com: 11
Medelbetyg: 4,9
IT WORKS!(2017-04-28)
Built an AR308 with a standard 308 carbine buffer spring in a Magpul CTR stock. Would only lock back the bolt carrier about 50% of the time after the last round. Installed this spring and now get lock back after the last round 100%. Used a standard 3.7oz buffer both times. Problem solved!
308 Rifle Flat-Wire Buffer Spring(2014-03-22)
I replaced the factory round buffer spring in a new Remington R-25, 7MM-08 with this buffer spring because of multiple feeding and extraction problems. I fired 100 rounds, fast and slow, without any malfunctions what-so-ever.
Excellent Product(2012-02-20)
In Canada, we can buy Norinco AR's. Although well built, the finer points are missed. One of those is final fit/finish/quality on some things. Gun worked great, but adding this, smooth consistent cycling, and the brass all went in the same area. It did minimize the buffer tube noise as well.
No more ringing sound at all - amazing(2012-04-03)
Installed this spring with a tiny bit of grease for lubrication, and it works amazing. Just as promised. Gun feels nice and solid when I shoot it, and I don't feel or hear any of the spring action anymore. I ran this with a spikes heavy buffer.
Nice!(2013-11-18)
I've used this spring in multiple carbine builds and a pistol; both in conjunction with standard, H2 and Spike's T2 buffers. Never had any issue with cycling. A top quality upgrade.
Great part(2015-03-26)
Great product, great price. Highly recommended.
Works well, but short life.(2018-07-16)
Very nice part, but low life expectancy. Did not see anything on JP's site or anyone mention on here, but on the card I got with the spring the recommended replacement is only 5,000 rds. I don't consider my self to shoot much, but 5k rds comes quick and was disappointed to see that after I got it. That said it works very comparably to the flat springs I have and have yet to hear any spring noise when firing.
Great Spring(2012-04-04)
I use this spring with the AR-Restor buffer. It has tamed my .50 Beowulf more than I thought possible!
Great buy(2014-02-04)
Excellent spring, takes alot of the "chung" out of the action. The extra power of this spring really drives the bolt home.
These work(2016-01-31)
Have used these springs in my own rifles, installed in customers rifles, never had a complaint. Just ordered a couple more to have them in stock.
Quiet (2016-08-24)
I have liked shooting AR's, but always hated the "boing" and rattle. When I built my own, I decided to eliminate those noises. Between the Spikes Tactical tungsten buffer and a JP Enterprises tuned spring, the only mechanical noise is from the bolt movement. Pure joy!