Varukorgen är tom.

Varukorg

Hjälp och kontakt

Fri frakt på beställningar över 2.999 kr

100 dagars returrätt

Nyhetsbrev

REA

Över 300 000 kunder - vi säger tack!

4,93/5 "Mycket bra" (1400+ recensioner)

40 000+ produkter inom jakt och skytte

MAGPUL
AR-15/16 PMAG RANGER® FLOORPLATE 3 PACK

873750001906 100003501

Fast, Easy Mag Changes In High Stress Situations

Replacement floorplate brings the speed and controllability of the original Magpul Ranger Floorplate to both 20- and 30-round PMAGs for fast, secure tactical magazine changes. Smoothly contoured, easy-to-grasp finger loop and grooved thumb dimple aid in positive extraction from tight mag pouches and help you hang onto the empty magazine with just a finger after a tactical reload. Made from tough, reinforced polymer overmolded with soft, non-slip synthetic rubber that also cushions the magazine from impact if dropped on a hard surface. Includes molded-in para-cord hole for custom loop configurations. Easy, drop-in installation: remove the PMAG’s factory floorplate as you do for cleaning, and replace it with the Ranger Floorplate. Sold in 3-paks and available in Black. Mag212 fits original and M2 PMAG, NOT GEN 3 556 PMAGS.

SPECS: Reinforced polymer, rubber coated. 3 per pak. Mag212 fits original and M2 PMAG, NOT GEN 3 556 PMAGS.

Mer...

Snabba, enkla magasinbyten i högspänningslägen

Ersättningsbottenplattan ger hastigheten och kontrollen från den ursprungliga Magpul Ranger-bottenplattan till både 20- och 30-runders PMAGs för snabba, säkra taktiska magasinbyten. Slätt konturerad, lätt att greppa fingeröglan och den räfflade tumdimplan hjälper till vid positiv extraktion från täta magasinfickor och gör att du kan hålla i det tomma magasinet med bara ett finger efter en taktisk omladdning. Tillverkad av tålig, förstärkt polymer överdragen med mjukt, halkfritt syntetgummi som också skyddar magasinet från stötar om det tappas på en hård yta. Inkluderar formgjuten paracord-hål för anpassade öglor. Enkel, drop-in installation: ta bort PMAG:s fabriksbottenplatta som du gör för rengöring, och ersätt den med Ranger-bottenplattan. Säljs i 3-pack och finns i svart. Mag212 passar original och M2 PMAG, EJ GEN 3 556 PMAGS.

SPECS: Förstärkt polymer, gummibelagd. 3 per förpackning. Mag212 passar original och M2 PMAG, EJ GEN 3 556 PMAGS.

Mer...

Kundernas betyg påMAGPUL RANGER PLATE 5.56X45MM FOR PMAG 30RD AR-15 MAGAZINE BLK 3/PK

Antal betyg: 14
Från brownells.com: 14
Medelbetyg: 4,8

Typical MAGPUL Quality (2010-01-14)

Easy to install and gives you a little something extra to grab

Easy access (2009-12-09)

These were very easy to install and make it much easier to remove the magazine from my Maxpedition pack. They also add a little height when using the magazine as a mono-pod.

Easy to install and use. (2012-12-01)

This is one of the best inovations Magpul had ever done for a magazine. It is easy to put on and take off.

Not for .300 Blk Mags. (2017-09-09)

These work great for Gen 2 5.56 mags, but they DO NOT fit on the .300 BLK mags that I bought them for!

Better than the original (2009-09-11)

I used the original Magpul Ranger plates and they worked fine, just a bit of a pain to install. The new ones are more durable and so easy you can do it blindfolded.

PMAG Ranger plates (2009-10-02)

The Magpul PMAG Ranger plates are a quick an effective solution for not only protecting your mags but also making them more effective. The angle on the bottom of the Ranger plate puts you at nearly the perfect angle for shooting while proned out on the ground. The loop also increases speed of mag exchanges and makes ripping the mag much smoother. I use them on all of my mags!

Should be standard equipment (2009-11-17)

With this on a mag that extends below the grip, you almost don't need a bipod or monopod for support-- works great for that reason alone.

Magpul Plates (2010-12-06)

These worked great. Easy to install.

saves your mag if you drop em a lot (2011-08-08)

gives you a little extra grip and a nice bumper if you drop a loaded mag on the concrete

Quite goood (2013-05-27)

Fits DPMS P-mags. Installation takes 1/2 minute. Protects your mags when dropping it on concrete floor.

Its a great (2016-01-29)

These fit perfectly on the Gen 3 magazines. It actually takes 5 seconds to remove floor plate and install the Ranger plate (unless you let the spring escape). My shooting days with the M16 goes back to the late 1960's and continue thru the present. The MagPul Gen3 with Ranger plate is great.

Correction (2016-07-13)

This is the correct floor plate for the Gen 2 PMAG and won't fit on the Gen 3 Magazine. (Model # MAG561 is the Gen 3 PMAG plate.) It takes all of 5 seconds (unless you let the spring escape) to remove the original plate and install this one. In addition to all the speed elements, this allows for effortless removal of magazines from tightly packed pouches of all types. It is well worth it to equip all your Gen 2 PMAGs with this plate.

Awesome Product (2017-09-24)

These Ranger Floorplates make it easy to grab and change magazines if you're wearing body armor or a plate carrier. Perfect fit and very functional!

DO NOT WORK W/10 RD PMAGS (2018-03-03)

Itâs a good solid product, but I bought these for some 10 round hunting mags and they donât fit. They work just fine on my 30 and 40 round mags. The way the 10 rounders are molded at the rail for the base plate doesnât line up with the Rangers and the way theyâre molded at the rail. I didnât see anywhere clearly stating they would not work with 10 round Pmags, and these are the 3rd Gen mags too. If I missed it, my fault, but it is certainly not clearly stated anywhere obvious. For that reason this product gets 4/5 stars. If youâre buying them for bigger mags, you should consider this a 5/5.

Disappointed and considering returning them as they arenât working out for what I wanted them for, but Iâll probably just put them on some 40 round mags.

Läs 14 fler betyg på brownells.com

419 419 1 SEK

Produktnr: 100003501
MAGPUL RANGER PLATE 5.56X45MM FOR PMAG 30RD AR-15 MAGAZINE BLK 3/PK
Tillverkarens produktnummer: MAG212-BLK 873750001906 Ersättningsbottenplattan ger hastigheten och kontrollen från den ursprungliga Magpul Ranger-bottenplattan till både 20- och 30-runders PMAGs för snabba, säkra taktiska magasinbyten. Slätt konturerad, lätt att greppa fingeröglan och den räfflade tumdimplan hjälper till vid positiv extraktion från täta magasinfickor och gör att du kan hålla i det tomma magasinet med bara ett finger efter en taktisk omladdning. Tillverkad av tålig, förstärkt polymer överdragen med mjukt, halkfritt syntetgummi som också skyddar magasinet från stötar om det tappas på en hård yta. Inkluderar formgjuten paracord-hål för anpassade öglor. Enkel, drop-in installation: ta bort PMAG:s fabriksbottenplatta som du gör för rengöring, och ersätt den med Ranger-bottenplattan. Säljs i 3-pack och finns i svart. Mag212 passar original och M2 PMAG, EJ GEN 3 556 PMAGS.

419 SEK 23 419,00 kr *

Levernastid ca. 14-21 dagar.
Mer än 10 st. i centrallagret.

Funktioner: Färg: Svart Make: AR-15

Lägg till i inköpslista

Fråga om produkt

Information

Lägg till i inköpslista

Fråga om produkt

Top takeaways

Ersättningsbottenplattan ger snabbare och säkrare taktiska magasinbyten för både 20- och 30-runders PMAGs.
Tillverkad av förstärkt polymer med mjukt, halkfritt syntetgummi för extra hållbarhet och skydd.
Enkel drop-in installation och säljs i 3-pack, kompatibel med original och M2 PMAG, EJ GEN 3 556 PMAGS.

Produktinformation

Färg: Svart Make: AR-15 Leveransvikt: 0,077kg Leveranshöjd: 32mm Leveransbredd: 140mm Leveranslängd: 210mm UPC : 873750001906

Produkt detaljer

Tillverkas i USA

Ansvarig ekonomisk aktör enligt EU-förordningen

Brownells Sverige AB
Box 99
793 22 Leksand
Sverige
info@brownells.se

Uppgradera dina PMAGs med AR-15/16 PMAG RANGER® FLOORPLATE 3-pack! 🛠️ Snabb installation och bättre grepp för taktiska byten.

Fast, Easy Mag Changes In High Stress Situations

SPECS: Reinforced polymer, rubber coated. 3 per pak. Mag212 fits original and M2 PMAG, NOT GEN 3 556 PMAGS.

Mer...

Snabba, enkla magasinbyten i högspänningslägen

SPECS: Förstärkt polymer, gummibelagd. 3 per förpackning. Mag212 passar original och M2 PMAG, EJ GEN 3 556 PMAGS.

Mer...

Kundernas betyg påMAGPUL RANGER PLATE 5.56X45MM FOR PMAG 30RD AR-15 MAGAZINE BLK 3/PK

Antal betyg: 14
Från brownells.com: 14
Medelbetyg: 4,8

Typical MAGPUL Quality (2010-01-14)

Easy to install and gives you a little something extra to grab

Easy access (2009-12-09)

These were very easy to install and make it much easier to remove the magazine from my Maxpedition pack. They also add a little height when using the magazine as a mono-pod.

Easy to install and use. (2012-12-01)

This is one of the best inovations Magpul had ever done for a magazine. It is easy to put on and take off.

Not for .300 Blk Mags. (2017-09-09)

These work great for Gen 2 5.56 mags, but they DO NOT fit on the .300 BLK mags that I bought them for!

Better than the original (2009-09-11)

I used the original Magpul Ranger plates and they worked fine, just a bit of a pain to install. The new ones are more durable and so easy you can do it blindfolded.

PMAG Ranger plates (2009-10-02)