The MOE-K2 is a drop in upgrade for AR15/M4 pistol grips with a more vertical grip angle optimized for short LOP weapons, such as PDW (Personal Defense Weapons) configurations. It has an aggressive texture for positive weapon control and is compatible with Magpul Grip Cores for storage customization. This grip will function properly with 7.62 NATO AR10/SR25 style of rifles but, depending on the make of the rifle, may or may not leave a gap between the 'beaver tail' and the receiver. This gap is purely aesthetic and will not affect function.
Mer...
MOE-K2 Àr en uppgradering för AR15/M4 pistolgrepp med en mer vertikal greppvinkel som Àr optimerad för korta LOP-vapen, sÄsom PDW (Personal Defense Weapons) konfigurationer. Det har en aggressiv textur för positiv vapenkontroll och Àr kompatibelt med Magpul Grip Cores för anpassad förvaring. Detta grepp kommer att fungera korrekt med 7.62 NATO AR10/SR25-stil av gevÀr men, beroende pÄ tillverkaren av gevÀret, kan det uppstÄ ett gap mellan 'beaver tail' och mottagaren. Detta gap Àr rent estetiskt och pÄverkar inte funktionen.
Mer...
Kundernas betyg pÄMAGPUL MOE-K2 GRIP POLYMER FOR AR-15/M4 STEALTH GRAY
Antal betyg: 8
FrÄn brownells.com: 8
Medelbetyg: 4,5
Best SBR grip(2017-03-12)
Best AR grip, have replaced it on all my SBR and AR.
Perfect(2014-03-30)
Used on a Bushmaster AR with a LWRC Ultra Compact collapsible buttstock system for CQB work.
Greatly improves ergonomics with the short stock which reduces wrist pain while holding the rifle on target for extended periods of time.
Great for those who like to keep the butt stock collapsed all the way.
I did not like this grip(2014-10-01)
I thought this grip would be different then the regular AR grips out there. It ended up being big, bulky, and did not feel comfortable in my hand. Due to the angle of the grip, the rifle was heavier when doing a magazine change or using my support hand to manipulate the rifle. I never had this issue when using the regular AR grip angle. I can see were you might need s grip like this on an AR. This grip might be good if you have large of extra-large hands.
Good Grip for Intended Role(2014-10-11)
This grip appears to be designed to be used primarily in SBR AR15's and a shorter LOP. It has a more vertical grip angle than other grips. To compensate for the change in angle a larger beavertail has been added as well as a grip swell to help keep the trigger finger in proper alignment with the trigger.
This feels incredibly awkward if you approach this from a traditional grip angle grip. However, if you approach this from a short LOP front-facing weapon stance/grip, this grip is actually very accommodating.
I find this grip extremely useful on two MK18 clone AR15s I use. I shoot them with the stock almost completely closed because primarily they are deployed from a vehicle.
Grips are personal things and should be chosen so. They are also not one size fits all. They serve a purpose and should be approached that way. This grip works very well on shorter LOP rifles and an aggressive forward facing shooting stance.
It's a good choice for the role it is meant to serve.
Better than the BCM for bigger hands (2017-05-16)
I have the BCM but felt I needed more meat on the grip, the K2 is perfect and blows the BCM away in every aspect. The BCM has a too shallow spring hole that tensions the safety too much, the K2's however is perfect and allows for easier safety actuation! Best PDW style grip out there! Is perfectly matched to the MOE SL-K on my 14.5 pinned AR.
Thank you Magpul(2017-05-27)
I'm using this on a fixed very short length of pull rig.
The grip angle is great for that short length of pull.
I also own the K grip, I have that on another gun, I prefer the feel of the K2. Both have great texture for gloves or bare naked hands.
The mag release button would be hard to press for my finger if my button was not over sized. (Not at all an issue with the K).
My hands are just over 8" long.
Favorite short length of pull grip.
Excellent Ergonomics for AR Pistols(2017-07-14)
Bought for a 10.5" AR pistol with KAK Shockwave Blade brace.
This K2 replaced an A2 style grip that was universally (even by a newbie who'd never touched an AR before) disliked by everyone who tried the pistol. Makes a significant difference on a pistol with a brace or on and SBR with shorter LOP.
Ordering more for all my AR pistols.
BTW, perfect fit on an Anderson receiver.
Someone with an average hand (8.5")(2018-08-03)
I have this on a carbine and I have been using it with Magpul's fixed length stock (100-011-569WB) and Extended buttpad (100-010-588WB). I have tried many grips including the Magpul K Grip, I have a lot of experience with the standard A2 grip also and the K2 Grip angle really does make a short length of pull gun more comfortable on the wrist, that slight angle change does change your leverage on the gun though and the muzzle is more prone to drooping than a traditionally angled grip if your not wrapping all your fingers around it in a positive way. I find that the K2 is easier to hold durring mag changes or any other single hand holding due to the extra grip meat, the K Grip is a little more squirrely and it's mostly noticeable while checking the mag seat after a mag change (the old push pull) . The mag release button needs to be an oversize kind for me to manipulate without moving my hand around this grip, but it gives me a perfect trigger finger position. I usually shoot with gloves and this grip has an excellent surface for gripping, never felt like it was going to slide out of my hand.
Produktnr: 100011682 MAGPUL MOE-K2 GRIP POLYMER FOR AR-15/M4 STEALTH GRAY Tillverkarens produktnummer: MAG522-GRY873750011011 MOE-K2 Àr en uppgradering för AR15/M4 pistolgrepp med en mer vertikal greppvinkel som Àr optimerad för korta LOP-vapen, sÄsom PDW (Personal Defense Weapons) konfigurationer. Det har en aggressiv textur för positiv vapenkontroll och Àr kompatibelt med Magpul Grip Cores för anpassad förvaring. Detta grepp kommer att fungera korrekt med 7.62 NATO AR10/SR25-stil av gevÀr men, beroende pÄ tillverkaren av gevÀret, kan det uppstÄ ett gap mellan 'beaver tail' och mottagaren. Detta gap Àr rent estetiskt och pÄverkar inte funktionen.
379SEK114379,00 kr
*
Levernastid ca. 14-21 dagar. Mer Àn 10 st. i centrallagret.
Tillverkas i USA
USA: s exportklassificering: 0A501.y.1
Destination Control Statement: Dessa poster styrs av USA: s regering och godkÀnns endast för export till det land dÀr den slutliga destinationen anvÀnds av den slutliga mottagaren eller slutanvÀndaren som identifierats hÀr. De fÄr inte vidareförsÀljas, överföras eller pÄ annat sÀtt kasseras till nÄgot annat land eller nÄgon annan Àn den godkÀnda slutliga mottagaren eller slutanvÀndaren, antingen i sin ursprungliga form eller efter att ha monterats i andra föremÄl utan att först fÄ godkÀnnande frÄn den amerikanska regeringen eller som annars Àr tillÄten enligt amerikansk lag och förordningar.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Produktnr: 100011679 MAGPUL MOE-K2 GRIP POLYMER FOR AR-15/M4 BLACK Tillverkarens produktnummer: MAG522-BLK873750008103 MOE-K2 Àr en uppgradering för AR15/M4 pistolgrepp med en mer vertikal greppvinkel som Àr optimerad för korta LOP-vapen, sÄsom PDW (Personal Defense Weapons) konfigurationer. Det har en aggressiv textur för positiv vapenkontroll och Àr kompatibelt med Magpul Grip Cores för anpassad förvaring. Detta grepp kommer att fungera korrekt med 7.62 NATO AR10/SR25-stil av gevÀr men, beroende pÄ tillverkaren av gevÀret, kan det uppstÄ ett gap mellan 'beaver tail' och mottagaren. Detta gap Àr rent estetiskt och pÄverkar inte funktionen.
379SEK24379,00 kr
*
Leveranstid ca. 4-10 dagar. Mer Àn 10 st. i lager i Europa.
Produktnr: 100011680 MAGPUL MOE-K2 GRIP POLYMER FOR AR-15/M4 FDE Tillverkarens produktnummer: MAG522-FDE873750008110 MOE-K2 Àr en uppgradering för AR15/M4 pistolgrepp med en mer vertikal greppvinkel som Àr optimerad för korta LOP-vapen, sÄsom PDW (Personal Defense Weapons) konfigurationer. Det har en aggressiv textur för positiv vapenkontroll och Àr kompatibelt med Magpul Grip Cores för anpassad förvaring. Detta grepp kommer att fungera korrekt med 7.62 NATO AR10/SR25-stil av gevÀr men, beroende pÄ tillverkaren av gevÀret, kan det uppstÄ ett gap mellan 'beaver tail' och mottagaren. Detta gap Àr rent estetiskt och pÄverkar inte funktionen.
379SEK136379,00 kr
*
Levernastid ca. 14-21 dagar. Mer Àn 10 st. i centrallagret.
Produktnr: 100011681 MAGPUL MOE-K2 GRIP POLYMER FOR AR-15/M4 ODG Tillverkarens produktnummer: MAG522-ODG873750008134 MOE-K2 Àr en uppgradering för AR15/M4 pistolgrepp med en mer vertikal greppvinkel som Àr optimerad för korta LOP-vapen, sÄsom PDW (Personal Defense Weapons) konfigurationer. Det har en aggressiv textur för positiv vapenkontroll och Àr kompatibelt med Magpul Grip Cores för anpassad förvaring. Detta grepp kommer att fungera korrekt med 7.62 NATO AR10/SR25-stil av gevÀr men, beroende pÄ tillverkaren av gevÀret, kan det uppstÄ ett gap mellan 'beaver tail' och mottagaren. Detta gap Àr rent estetiskt och pÄverkar inte funktionen.
379SEK140379,00 kr
*
Levernastid ca. 14-21 dagar. Mer Àn 10 st. i centrallagret.
The MOE-K2 is a drop in upgrade for AR15/M4 pistol grips with a more vertical grip angle optimized for short LOP weapons, such as PDW (Personal Defense Weapons) configurations. It has an aggressive texture for positive weapon control and is compatible with Magpul Grip Cores for storage customization. This grip will function properly with 7.62 NATO AR10/SR25 style of rifles but, depending on the make of the rifle, may or may not leave a gap between the 'beaver tail' and the receiver. This gap is purely aesthetic and will not affect function.
Mer...
MOE-K2 Àr en uppgradering för AR15/M4 pistolgrepp med en mer vertikal greppvinkel som Àr optimerad för korta LOP-vapen, sÄsom PDW (Personal Defense Weapons) konfigurationer. Det har en aggressiv textur för positiv vapenkontroll och Àr kompatibelt med Magpul Grip Cores för anpassad förvaring. Detta grepp kommer att fungera korrekt med 7.62 NATO AR10/SR25-stil av gevÀr men, beroende pÄ tillverkaren av gevÀret, kan det uppstÄ ett gap mellan 'beaver tail' och mottagaren. Detta gap Àr rent estetiskt och pÄverkar inte funktionen.
Mer...
Kundernas betyg pÄMAGPUL MOE-K2 GRIP POLYMER FOR AR-15/M4 STEALTH GRAY
Antal betyg: 8
FrÄn brownells.com: 8
Medelbetyg: 4,5
Best SBR grip(2017-03-12)
Best AR grip, have replaced it on all my SBR and AR.
Perfect(2014-03-30)
Used on a Bushmaster AR with a LWRC Ultra Compact collapsible buttstock system for CQB work.
Greatly improves ergonomics with the short stock which reduces wrist pain while holding the rifle on target for extended periods of time.
Great for those who like to keep the butt stock collapsed all the way.
I did not like this grip(2014-10-01)
I thought this grip would be different then the regular AR grips out there. It ended up being big, bulky, and did not feel comfortable in my hand. Due to the angle of the grip, the rifle was heavier when doing a magazine change or using my support hand to manipulate the rifle. I never had this issue when using the regular AR grip angle. I can see were you might need s grip like this on an AR. This grip might be good if you have large of extra-large hands.
Good Grip for Intended Role(2014-10-11)
This grip appears to be designed to be used primarily in SBR AR15's and a shorter LOP. It has a more vertical grip angle than other grips. To compensate for the change in angle a larger beavertail has been added as well as a grip swell to help keep the trigger finger in proper alignment with the trigger.
This feels incredibly awkward if you approach this from a traditional grip angle grip. However, if you approach this from a short LOP front-facing weapon stance/grip, this grip is actually very accommodating.
I find this grip extremely useful on two MK18 clone AR15s I use. I shoot them with the stock almost completely closed because primarily they are deployed from a vehicle.
Grips are personal things and should be chosen so. They are also not one size fits all. They serve a purpose and should be approached that way. This grip works very well on shorter LOP rifles and an aggressive forward facing shooting stance.
It's a good choice for the role it is meant to serve.
Better than the BCM for bigger hands (2017-05-16)
I have the BCM but felt I needed more meat on the grip, the K2 is perfect and blows the BCM away in every aspect. The BCM has a too shallow spring hole that tensions the safety too much, the K2's however is perfect and allows for easier safety actuation! Best PDW style grip out there! Is perfectly matched to the MOE SL-K on my 14.5 pinned AR.
Thank you Magpul(2017-05-27)
I'm using this on a fixed very short length of pull rig.
The grip angle is great for that short length of pull.
I also own the K grip, I have that on another gun, I prefer the feel of the K2. Both have great texture for gloves or bare naked hands.
The mag release button would be hard to press for my finger if my button was not over sized. (Not at all an issue with the K).
My hands are just over 8" long.
Favorite short length of pull grip.
Excellent Ergonomics for AR Pistols(2017-07-14)
Bought for a 10.5" AR pistol with KAK Shockwave Blade brace.
This K2 replaced an A2 style grip that was universally (even by a newbie who'd never touched an AR before) disliked by everyone who tried the pistol. Makes a significant difference on a pistol with a brace or on and SBR with shorter LOP.
Ordering more for all my AR pistols.
BTW, perfect fit on an Anderson receiver.
Someone with an average hand (8.5")(2018-08-03)
I have this on a carbine and I have been using it with Magpul's fixed length stock (100-011-569WB) and Extended buttpad (100-010-588WB). I have tried many grips including the Magpul K Grip, I have a lot of experience with the standard A2 grip also and the K2 Grip angle really does make a short length of pull gun more comfortable on the wrist, that slight angle change does change your leverage on the gun though and the muzzle is more prone to drooping than a traditionally angled grip if your not wrapping all your fingers around it in a positive way. I find that the K2 is easier to hold durring mag changes or any other single hand holding due to the extra grip meat, the K Grip is a little more squirrely and it's mostly noticeable while checking the mag seat after a mag change (the old push pull) . The mag release button needs to be an oversize kind for me to manipulate without moving my hand around this grip, but it gives me a perfect trigger finger position. I usually shoot with gloves and this grip has an excellent surface for gripping, never felt like it was going to slide out of my hand.