This 9mm chambered 4.5 inch Modern Series Barrel is machined from 4150 Chrome Moly Vanadium steel with a QPQ Corrosion Resistant Finish and 1/2-28 x .400 full profile threads. Designed to work with both Colt/RR and Glock style AR builds. Compatible with standard mil-spec uppers. There are also numerous dedicated 9mm upper options that work. Requires the use of a unique magwell conversion (Colt/Rock River style) with UZI mags or a dedicated 9mm lower with Glock mags. 9mm on an AR15 platform operates by blowback and does not need a gas block or gas tube. Threaded 1/2x28 or 1/2x36 to give you greater versatility when choosing a suppressor. Integrated feed ramp and barrel extension. Since the “barrel extension” is an integral part of the barrel, the length stated is the true overall length. For example, an 11” 9mm barrel has the same outer dimensions/length as a 10.5” 5.56 barrel. IMPORTANT: A standard 1/2x28 flash hider will not have enough clearance for a 9mm round to pass. Before installing a muzzle device, ensure a 9mm round will drop freely through the muzzle device bore. You may use this barrel with a lower receiver that is a Registered SBR, Machine Gun, or Pistol. Possession of this barrel along with a Non-NFA lower receiver is Prohibited, except when installed on a Pistol configuration firearm. Additional Info Material: 4150 Chrome Moly Vanadium Finish: QPQ Corrosion Resistant Gas System Length: Blowback Gas Block Journal: Blowback Gas System - No Gas Block Twist Rate: 1:10 inches Muzzle: 1/2x28 Threaded
Denna 9mm kamrade 4,5 tum Modern Series-lopp är bearbetad från 4150 Chrome Moly Vanadium-stål med en QPQ korrosionsbeständig finish och 1/2-28 x .400 fullprofiltrådar. Designad för att fungera med både Colt/RR och Glock-stil AR-byggnader. Kompatibel med standard mil-spec övre. Det finns också många dedikerade 9mm övre alternativ som fungerar. Kräver användning av en unik magwell-konvertering (Colt/Rock River-stil) med UZI-magasin eller en dedikerad 9mm underdel med Glock-magasin. 9mm på en AR15-plattform fungerar genom blowback och behöver ingen gasblock eller gasrör. Trådad 1/2x28 eller 1/2x36 för att ge dig större mångsidighet när du väljer en dämpare. Integrerad matarramp och loppförlängning. Eftersom "loppförlängningen" är en integrerad del av loppet, är den angivna längden den verkliga totala längden. Till exempel har ett 11" 9mm lopp samma yttre dimensioner/längd som ett 10,5" 5,56 lopp. VIKTIGT: En standard 1/2x28 flash hider kommer inte att ha tillräckligt med utrymme för att en 9mm patron ska passera. Innan du installerar en mynningstillbehör, se till att en 9mm patron kan falla fritt genom mynningstillbehörens hål. Du kan använda detta lopp med en underdel som är en registrerad SBR, maskinpistoler eller pistol. Innehav av detta lopp tillsammans med en icke-NFA underdel är förbjudet, förutom när det är installerat på ett pistolkonfigurerat vapen. Ytterligare info Material: 4150 Chrome Moly Vanadium Finish: QPQ Korrosionsbeständig Gas System Längd: Blowback Gas Block Journal: Blowback Gas System - Ingen Gas Block Twist Rate: 1:10 tum Mynning: 1/2x28 Trådad