Durable Steel Magazines Resist Wear, Maintain Their Shape
Make the most of your 6.8mm chambered AR with long-wearing, extra-tough steel magazines. Hardened steel bodies with tempered feed lips hold their shape and won’t flex, bend, or deform. Tempered steel springs help maintain reliable feeding and function even with the heavier 6.8mm cartridge. Lightweight, Magpul brand, nylon composite followers are marked 6.8 to avoid confusion with AR magazines for other calibers. These magazines also work with the .224 Valkyrie and .22 Nosler Cartrdiges. Available in 10-, 15-, or 25-round capacity.
SPECS: Steel, blue. Fits. AR-15/M16 rifles chambered for 6.8 x 43mm Rem. SPC., .22 Nosler, and .224 Valkyrie
Mer...
Slitstarka stålmagasin motstår slitage, behåller sin form
Få ut mesta möjliga av din 6.8mm kammade AR med slitstarka, extra tåliga stålmagasin. Härdat stål i kropparna med härdade matningsläppar behåller sin form och kommer inte att flexa, böjas eller deformeras. Härdade stålfjädrar hjälper till att upprätthålla pålitlig matning och funktion även med den tyngre 6.8mm patronen. Lätta, Magpul-märkta, nylonkompositföljare är markerade med 6.8 för att undvika förväxling med AR-magasin för andra kalibrar. Dessa magasin fungerar också med .224 Valkyrie och .22 Nosler-patroner. Tillgängliga i kapaciteter om 10, 15 eller 25 patroner.
SPECS: Stål, blått. Passar AR-15/M16 gevär kammade för 6.8 x 43mm Rem. SPC., .22 Nosler och .224 Valkyrie
Antal betyg: 10
Från brownells.com: 10
Medelbetyg: 3,9
Nice, sturdy magazine(2010-04-19)
It was a little bit of a tight fit at first. Several reloads later it was accepted into the magwell perfrectly. Very nice item indeed.
High quality magazine, very well made.(2011-02-25)
I have been using PRI's 10 round mag in my Barrett REC7 on the bench with very good results so thought I would try the 15 round version. The 15 round mag is a nice compromise between the 10 round and the 25 round mag. Still does not protrude too much and works great shooting off of my bench. Also ideal for varmint hunting.
NEVER NEEDS CLEANING ---NOT!!!(2013-06-02)
Bought 2 of these from Brownells. Each functioned well the first time I used them. However, this magazine in NEXT TO IMPOSSIBLE to take apart and clean...even at home much less in the field. I have never seen the bottom plate on a mag SO DIFFICULT to remove. Both were the same. Assembly was just a difficult. I would not trust a gun I could not keep clean and the same applies to a magazine. I plan to use these mags until they become dirty or unserviceable and them I will toss them into the recycle bin.
Solid mag(2010-11-08)
A bit heavier than other 6.8 mags, but of a solid and well designed construction. They require a bit of a "break in" period to fit the full 25 without feeling like you are forcing too many rounds in, just load and fire off a couple of mags and you're good to go.
Best 6.8mm Magazine On Market!(2012-02-12)
This is the best manufactured magazine out on the market. Engineered for proper functions and withstand stress. After review and tests, it is the only one I trust with my rifle when my life depends on it to function properly.
Best You Can Buy - They Never Fail(2012-02-15)
I have only tried one other brand of 6.8 mag; it was supplied with the gun. Not bad but not 100%. I have put 9,000 rounds through 4 of these mags and they just work. If you have an AR in 6.8, these are the mags you need. Don't risk your money on aproduct that is only 98% as good. Guns require 100% reliability and Precision Reflex gives you that.
2 out of 6 didn't work(2012-04-02)
I took six of these magazines to the range four worked ok. One wouldn't seat in the magwell, and one froze with three rounds still in it.
Magazine falls out of rifle(2013-08-03)
I can't recommend this product and will be returning to Brownells. If mag is bumped, it falls out of rifle. If rifle is fired, mag falls out. Mag body is too small for mag well. Never a problem with other mags in this lower. The mag I bought is defective.
Will buy more.(2011-02-23)
I am 100% satisfied with this product. Fits perfectly in my Barrett REC7 6.8. Fits snug yet drops free even empty, you get what you pay for. Will buy more from PRI.
Welded into one piece(2011-09-16)
I was getting along with C-mags which are folded over and tack welded. These PRI magazines are welded into one piece without any overlapping folds. So you have a little more room for a longer COL and they have no sheet metal edges. The bottoms are much more solid as well.
Produktnr: 714000002 PRECISION REFLEX AR-15 MAG 6.8 SPC, 22 NOSLER, 224 VALKYRIE 10RD STEEL BLK Tillverkarens produktnummer: NONE090222553156 Få ut mesta möjliga av din 6.8mm kammade AR med slitstarka, extra tåliga stålmagasin. Härdat stål i kropparna med härdade matningsläppar behåller sin form och kommer inte att flexa, böjas eller deformeras. Härdade stålfjädrar hjälper till att upprätthålla pålitlig matning och funktion även med den tyngre 6.8mm patronen. Lätta, Magpul-märkta, nylonkompositföljare är markerade med 6.8 för att undvika förväxling med AR-magasin för andra kalibrar. Dessa magasin fungerar också med .224 Valkyrie och .22 Nosler-patroner. Tillgängliga i kapaciteter om 10, 15 eller 25 patroner.
749SEK2749,00 kr
*
Levernastid ca. 14-21 dagar. 2 st. i centrallagret.
Tillverkas i USA
USA: s exportklassificering: 0A501.x
Destination Control Statement: Dessa poster styrs av USA: s regering och godkänns endast för export till det land där den slutliga destinationen används av den slutliga mottagaren eller slutanvändaren som identifierats här. De får inte vidareförsäljas, överföras eller på annat sätt kasseras till något annat land eller någon annan än den godkända slutliga mottagaren eller slutanvändaren, antingen i sin ursprungliga form eller efter att ha monterats i andra föremål utan att först få godkännande från den amerikanska regeringen eller som annars är tillåten enligt amerikansk lag och förordningar.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Produktnr: 714000001 PRECISION REFLEX AR-15 MAG 6.8 SPC, 22 NOSLER, 224 VALKYRIE 25RD STEEL BLK Tillverkarens produktnummer: NONE Få ut mesta möjliga av din 6.8mm kammade AR med slitstarka, extra tåliga stålmagasin. Härdat stål i kropparna med härdade matningsläppar behåller sin form och kommer inte att flexa, böjas eller deformeras. Härdade stålfjädrar hjälper till att upprätthålla pålitlig matning och funktion även med den tyngre 6.8mm patronen. Lätta, Magpul-märkta, nylonkompositföljare är markerade med 6.8 för att undvika förväxling med AR-magasin för andra kalibrar. Dessa magasin fungerar också med .224 Valkyrie och .22 Nosler-patroner. Tillgängliga i kapaciteter om 10, 15 eller 25 patroner.
949SEK2949,00 kr
*
Leveranstid ca. 14-21 dagar. 2 st. i centrallagret.
Produktnr: 714000010 PRECISION REFLEX AR-15 MAG 6.8 SPC, 22 NOSLER, 224 VALKYRIE 15RD STEEL BLK Tillverkarens produktnummer: 056806090222553149 Få ut mesta möjliga av din 6.8mm kammade AR med slitstarka, extra tåliga stålmagasin. Härdat stål i kropparna med härdade matningsläppar behåller sin form och kommer inte att flexa, böjas eller deformeras. Härdade stålfjädrar hjälper till att upprätthålla pålitlig matning och funktion även med den tyngre 6.8mm patronen. Lätta, Magpul-märkta, nylonkompositföljare är markerade med 6.8 för att undvika förväxling med AR-magasin för andra kalibrar. Dessa magasin fungerar också med .224 Valkyrie och .22 Nosler-patroner. Tillgängliga i kapaciteter om 10, 15 eller 25 patroner.
799SEK0799,00 kr
*
Restorder. Skickas när den finns i lager. Leveranstid ca 4-12 veckor från centrallagret.
Durable Steel Magazines Resist Wear, Maintain Their Shape
Make the most of your 6.8mm chambered AR with long-wearing, extra-tough steel magazines. Hardened steel bodies with tempered feed lips hold their shape and won’t flex, bend, or deform. Tempered steel springs help maintain reliable feeding and function even with the heavier 6.8mm cartridge. Lightweight, Magpul brand, nylon composite followers are marked 6.8 to avoid confusion with AR magazines for other calibers. These magazines also work with the .224 Valkyrie and .22 Nosler Cartrdiges. Available in 10-, 15-, or 25-round capacity.
SPECS: Steel, blue. Fits. AR-15/M16 rifles chambered for 6.8 x 43mm Rem. SPC., .22 Nosler, and .224 Valkyrie
Mer...
Slitstarka stålmagasin motstår slitage, behåller sin form
Få ut mesta möjliga av din 6.8mm kammade AR med slitstarka, extra tåliga stålmagasin. Härdat stål i kropparna med härdade matningsläppar behåller sin form och kommer inte att flexa, böjas eller deformeras. Härdade stålfjädrar hjälper till att upprätthålla pålitlig matning och funktion även med den tyngre 6.8mm patronen. Lätta, Magpul-märkta, nylonkompositföljare är markerade med 6.8 för att undvika förväxling med AR-magasin för andra kalibrar. Dessa magasin fungerar också med .224 Valkyrie och .22 Nosler-patroner. Tillgängliga i kapaciteter om 10, 15 eller 25 patroner.
SPECS: Stål, blått. Passar AR-15/M16 gevär kammade för 6.8 x 43mm Rem. SPC., .22 Nosler och .224 Valkyrie
Antal betyg: 10
Från brownells.com: 10
Medelbetyg: 3,9
Nice, sturdy magazine(2010-04-19)
It was a little bit of a tight fit at first. Several reloads later it was accepted into the magwell perfrectly. Very nice item indeed.
High quality magazine, very well made.(2011-02-25)
I have been using PRI's 10 round mag in my Barrett REC7 on the bench with very good results so thought I would try the 15 round version. The 15 round mag is a nice compromise between the 10 round and the 25 round mag. Still does not protrude too much and works great shooting off of my bench. Also ideal for varmint hunting.
NEVER NEEDS CLEANING ---NOT!!!(2013-06-02)
Bought 2 of these from Brownells. Each functioned well the first time I used them. However, this magazine in NEXT TO IMPOSSIBLE to take apart and clean...even at home much less in the field. I have never seen the bottom plate on a mag SO DIFFICULT to remove. Both were the same. Assembly was just a difficult. I would not trust a gun I could not keep clean and the same applies to a magazine. I plan to use these mags until they become dirty or unserviceable and them I will toss them into the recycle bin.
Solid mag(2010-11-08)
A bit heavier than other 6.8 mags, but of a solid and well designed construction. They require a bit of a "break in" period to fit the full 25 without feeling like you are forcing too many rounds in, just load and fire off a couple of mags and you're good to go.
Best 6.8mm Magazine On Market!(2012-02-12)
This is the best manufactured magazine out on the market. Engineered for proper functions and withstand stress. After review and tests, it is the only one I trust with my rifle when my life depends on it to function properly.
Best You Can Buy - They Never Fail(2012-02-15)
I have only tried one other brand of 6.8 mag; it was supplied with the gun. Not bad but not 100%. I have put 9,000 rounds through 4 of these mags and they just work. If you have an AR in 6.8, these are the mags you need. Don't risk your money on aproduct that is only 98% as good. Guns require 100% reliability and Precision Reflex gives you that.
2 out of 6 didn't work(2012-04-02)
I took six of these magazines to the range four worked ok. One wouldn't seat in the magwell, and one froze with three rounds still in it.
Magazine falls out of rifle(2013-08-03)
I can't recommend this product and will be returning to Brownells. If mag is bumped, it falls out of rifle. If rifle is fired, mag falls out. Mag body is too small for mag well. Never a problem with other mags in this lower. The mag I bought is defective.
Will buy more.(2011-02-23)
I am 100% satisfied with this product. Fits perfectly in my Barrett REC7 6.8. Fits snug yet drops free even empty, you get what you pay for. Will buy more from PRI.
Welded into one piece(2011-09-16)
I was getting along with C-mags which are folded over and tack welded. These PRI magazines are welded into one piece without any overlapping folds. So you have a little more room for a longer COL and they have no sheet metal edges. The bottoms are much more solid as well.