Clean your AR-15 from the breech to prevent muzzle or chamber damage. Insert into the upper receiver, replacing the bolt carrier, for safe and easy cleaning. Self-centers in the receiver. O-ring seal at breech and solvent port keeps chemicals out of the action.
SPECS: Machined Delrin. 9½" (24cm) long. Models for AR-15s chambered in .223/5.56mm NATO.
Mer...
Förhindrar Skador pÄ Kammare & Pipa
Rengör din AR-15 frÄn slutstycket för att förhindra skador pÄ mynningen eller kammaren. SÀtt in i övre mottagaren, ersÀtt bÀraren av slutstycket, för sÀker och enkel rengöring. Centrerar sig sjÀlv i mottagaren. O-ringstÀtning vid slutstycket och lösningsmedelsport hÄller kemikalier borta frÄn mekanismen.
Antal betyg: 3
FrÄn brownells.com: 3
Medelbetyg: 2,3
Not the best design(2017-07-24)
This bore guide is a disappointment. There is no o-ring at the chamber end to keep solvent in the barrel. The solvent port is at the ejection port which makes it difficult to put solvent on the patch or brush. The guide barely extends out the back of the upper and is difficult to keep in place. The entire length of the bore guide is bore diameter so a brush must be completely withdrawn from the guide before being reversed. A Sinclair bore guide is overbore diameter in the body so a brush is contained within the guide when the stroke is reversed.
Nice product. in most applications, but.(2013-05-08)
This is a nice product for MOST applications. However, you may encounter it being too large in diameter at the rear O-ring for use in match quality upper receivers...you'll have to remove the rear O-ring if you want to be able to fully insert it into a tight tolerance upper receiver. Also, mine (from another source other than Brownells) did not have the chamber O-ring included in the factory packaging...a trip to the hardware store to buy a suitable O-ring for use at the chamber was required.
end piece broke on first use(2016-06-17)
The end that fits into the bore broke on first use. Disappointed. Bought it quite a while ago and never used it until recently so not sure it can be returned.
Produktnr: 812015002 SATERN .223/5.56 BORE GUIDE Tillverkarens produktnummer: NONE Rengör din AR-15 frÄn slutstycket för att förhindra skador pÄ mynningen eller kammaren. SÀtt in i övre mottagaren, ersÀtt bÀraren av slutstycket, för sÀker och enkel rengöring. Centrerar sig sjÀlv i mottagaren. O-ringstÀtning vid slutstycket och lösningsmedelsport hÄller kemikalier borta frÄn mekanismen.
899SEK4899,00 kr
*
Levernastid ca. 14-21 dagar. 4 st. i centrallagret.
Funktioner:Make: AR-15Patron: 223 Remington, 5.56 mm NATO
AR-15 BORE GUIDE SATERN .223/5.56 BORE GUIDE hjÀlper till att rengöra din AR-15 frÄn slutstycket för att undvika skador pÄ mynningen eller kammaren.
Den centrerar sig sjÀlv i mottagaren och har en O-ringstÀtning vid slutstycket samt en lösningsmedelsport för att hÄlla kemikalier borta frÄn mekanismen.
Tillverkad av maskinbearbetad Delrin och Ă€r 9Âœ" (24 cm) lĂ„ng, designad för AR-15 kammade för .223/5.56mm NATO.
Produktinformation
Make:
AR-15
Patron:
223 Remington,5.56 mm NATO
Leveransvikt: 0,136kgLeveranshöjd: 18mmLeveransbredd: 38mmLeveranslÀngd: 249mm
Produkt detaljer
Tillverkas i USA
Ansvarig ekonomisk aktör enligt EU-förordningen
Brownells Sverige AB
Box 99
793 22 Leksand
Sverige
info@brownells.se
HĂ„ll din AR-15 i toppskick med SATERNs .223/5.56 Bore Guide! đ ïž Enkel rengöring utan skador pĂ„ kammaren. Perfekt passform och O-ringstĂ€tning.
Clean your AR-15 from the breech to prevent muzzle or chamber damage. Insert into the upper receiver, replacing the bolt carrier, for safe and easy cleaning. Self-centers in the receiver. O-ring seal at breech and solvent port keeps chemicals out of the action.
SPECS: Machined Delrin. 9½" (24cm) long. Models for AR-15s chambered in .223/5.56mm NATO.
Mer...
Förhindrar Skador pÄ Kammare & Pipa
Rengör din AR-15 frÄn slutstycket för att förhindra skador pÄ mynningen eller kammaren. SÀtt in i övre mottagaren, ersÀtt bÀraren av slutstycket, för sÀker och enkel rengöring. Centrerar sig sjÀlv i mottagaren. O-ringstÀtning vid slutstycket och lösningsmedelsport hÄller kemikalier borta frÄn mekanismen.
Antal betyg: 3
FrÄn brownells.com: 3
Medelbetyg: 2,3
Not the best design(2017-07-24)
This bore guide is a disappointment. There is no o-ring at the chamber end to keep solvent in the barrel. The solvent port is at the ejection port which makes it difficult to put solvent on the patch or brush. The guide barely extends out the back of the upper and is difficult to keep in place. The entire length of the bore guide is bore diameter so a brush must be completely withdrawn from the guide before being reversed. A Sinclair bore guide is overbore diameter in the body so a brush is contained within the guide when the stroke is reversed.
Nice product. in most applications, but.(2013-05-08)
This is a nice product for MOST applications. However, you may encounter it being too large in diameter at the rear O-ring for use in match quality upper receivers...you'll have to remove the rear O-ring if you want to be able to fully insert it into a tight tolerance upper receiver. Also, mine (from another source other than Brownells) did not have the chamber O-ring included in the factory packaging...a trip to the hardware store to buy a suitable O-ring for use at the chamber was required.
end piece broke on first use(2016-06-17)
The end that fits into the bore broke on first use. Disappointed. Bought it quite a while ago and never used it until recently so not sure it can be returned.