There's no need to go with a pistol-caliber specific AR lower on your next pistol-caliber carbine build. With the Stern Defense AR-15 9mm Conversion Adapter you have the ability to utilize popular pistol magazines which you may already have a supply of. Stern Defense make two differ models of their Conversion Adapter, one which uses Glock® magazines, and one which uses either Smith & Wesson M&P or Sig 320/250 magazines. The Stern Defense AR-15 9mm Conversion Adapter is easily installed into any mil-spec AR-15 lower receiver within seconds and even incorporates a last-round bolt hold open feature. Each adapter is machined from aluminum and requires the use of a 9mm/.40 S&W barrel and a Glock-cut bolt. Made of aircraft grade aluminum Lightweight, ergonomic design Installs in seconds If you’re considering converting your AR-15 to a 9mm, give the Stern Defense Adapter a thought!
Mer...
Enkelt konvertera din Lower till 9mm
Det finns inget behov av att välja en AR-lower specifikt för pistolkaliber till ditt nästa pistolkaliberkarbinbygge. Med Stern Defense AR-15 9mm Conversion Adapter har du möjligheten att använda populära pistolmagasin som du kanske redan har ett lager av. Stern Defense tillverkar två olika modeller av sin Conversion Adapter, en som använder Glock®-magasin och en som använder antingen Smith & Wesson M&P eller Sig 320/250-magasin. Stern Defense AR-15 9mm Conversion Adapter installeras enkelt i vilken mil-spec AR-15 lower receiver som helst inom några sekunder och har till och med en funktion för hållning av slutvarvet öppen. Varje adapter är maskinbearbetad från aluminium och kräver användning av ett 9mm/.40 S&W-löp och en Glock-skuren bult. Tillverkad av flygplansgradigt aluminium Lätt, ergonomisk design Installeras på sekunder Om du överväger att konvertera din AR-15 till en 9mm, ge Stern Defense Adapter en tanke!
Antal betyg: 6
Från brownells.com: 6
Medelbetyg: 4,7
Great product so far.(2018-06-25)
Product is well machined and well thought out. The bolt hold open design works great as opposed to some others. Magazine release feels natural for both strong and weak side support. The only mod required was removal of the integral feed ramp because the upper is a Taccom ULW upper that already has a barrel ramp. Removing the ramp was easily accomplished with an allen wrench. The customer service rep at Stern was very helpful with this. Specs are as follows:
Taccom ULW complete upper with ramp and bolt mod,
Taccom adjustable buffer system,
Spikes mil spec multi cal lower,
Geissele of some kind
Stern 9mm Adapter(2018-06-26)
I bought this produce so I wouldnât have to but a different lower receiver. I did call Stern because it would not let me cycle the bolt with the adapter fully seated. I had bought a Foxtrot Mike upper. Stern said that for $7.50 they would mill .035 off the bolt plus shipping both ways. It works like a charm now. Very impressed with the product and Sternâs costumer service.
Use those Glock mags for PCC.(2018-06-30)
Works great with my FM upper after the bolt mod. Bolt hold open does not work with the Magpul mags. Works perfectly with glock and ETS
Building a 9mm AR Carbine on a budget can quickly become an expensive endeavor if you buy unreliable parts. The AR-15 9mm Conversion Adapter for Glock® Magazines by STERN DEFENSE Is a reliable way to use Glock magazines in a Mil-spec lower. I use it for USPSA PCC division and Steel Challenge matches to keep the feel of an M-4 and for training. Iâve personally tried other methods and this system is far superior. The feed ramp angle on 9mm is critical for proper function and reliability, with the vast array of projectile profiles. So far Iâve had luck with multiple types of 9mm projectiles I.E. Winchester 124gr FMJ, 145gr RN Bayou, and 147gr FP/HP Berryâs. The last round Bolt hold open is somewhat unnecessary for PCC, however, is great to feel the weight transfer of the bolt carrier group and buffer and have it lock on the last round.
The only feature that I dislike is the magazine release is located at the bottom of the unit which is not a big deal if your state allows âstandard capacityâ magazines. However, Iâd like index the same magazine release in the same configuration of an AR series firearm, which would be difficult without permanently modifying the magazine. Overall a great product the moment you open the package you can see that a lot of thought went into its development and manufacturer.
Awesome(2018-08-21)
Been looking for a reliable 9mm conversion for almost a year and after tons of researches (forum and YT), I decided to bite the bullet and purchase Stern Defense.
I have to say this thing is amazing, I installed this to my Anderson lower and it fits perfectly no play and nothing. To be on the safe side, I purchased Stern Defense Upper (from their website) paired with their H3 Buffer.
Went to the range today and shot 1000rounds and ZERO hiccup! I ran all kinds of ammo (freedommunitions 115/147gn, Fiocchi 115gn, and Sellier&Bellot 115gn)
All and all, I'm very satisfied with the product!
Not perfect but close(2018-10-06)
This adapter is fantastic. The pistol I used fed reliably from all the Glock mags that fit in the well, including 40 S&W and 357 SIG magazines. Installation and adjustment is a matter of turning in one screw to set it, and then two more for standoffs so it doesn't move around when you seat a new magazine.
The only reason I took off a star is because the mag release is a little awkward to use, the thing was very sticky with an aftermarket 9mm drum magazine, and the bolt hold open was a little hyper aggressive and held the bolt open with one still in the magazine.
Produktnr: 100027483 STERN DEFENSE AR-15 9MM CONVERSION ADAPTER FOR GLOCK® MAGAZINES Tillverkarens produktnummer: 001-SD MAG-AD9-860141001508 Det finns inget behov av att välja en AR-lower specifikt för pistolkaliber till ditt nästa pistolkaliberkarbinbygge. Med Stern Defense AR-15 9mm Conversion Adapter har du möjligheten att använda populära pistolmagasin som du kanske redan har ett lager av. Stern Defense tillverkar två olika modeller av sin Conversion Adapter, en som använder Glock®-magasin och en som använder antingen Smith & Wesson M&P eller Sig 320/250-magasin. Stern Defense AR-15 9mm Conversion Adapter installeras enkelt i vilken mil-spec AR-15 lower receiver som helst inom några sekunder och har till och med en funktion för hållning av slutvarvet öppen. Varje adapter är maskinbearbetad från aluminium och kräver användning av ett 9mm/.40 S&W-löp och en Glock-skuren bult. Tillverkad av flygplansgradigt aluminium Lätt, ergonomisk design Installeras på sekunder Om du överväger att konvertera din AR-15 till en 9mm, ge Stern Defense Adapter en tanke!
3649SEK03 649,00 kr
*
Restorder. Skickas när den finns i lager. Leveranstid ca 4-12 veckor från centrallagret.
Tillverkas i USA
USA: s exportklassificering: 0A501.x
Destination Control Statement: Dessa poster styrs av USA: s regering och godkänns endast för export till det land där den slutliga destinationen används av den slutliga mottagaren eller slutanvändaren som identifierats här. De får inte vidareförsäljas, överföras eller på annat sätt kasseras till något annat land eller någon annan än den godkända slutliga mottagaren eller slutanvändaren, antingen i sin ursprungliga form eller efter att ha monterats i andra föremål utan att först få godkännande från den amerikanska regeringen eller som annars är tillåten enligt amerikansk lag och förordningar.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Ansvarig ekonomisk aktör enligt EU-förordningen
Brownells Sverige AB
Box 99
793 22 Leksand
Sverige
info@brownells.se
Produktnr: 100039214 STERN DEFENSE AR-15 9MM COVERSION ADAPTER FOR BERETTA 92 MAGAZINES Tillverkarens produktnummer: 001SDMAGADB929M860141001591 Det finns inget behov av att välja en AR-lower specifikt för pistolkaliber till ditt nästa pistolkaliberkarbinbygge. Med Stern Defense AR-15 9mm Conversion Adapter har du möjligheten att använda populära pistolmagasin som du kanske redan har ett lager av. Stern Defense tillverkar två olika modeller av sin Conversion Adapter, en som använder Glock®-magasin och en som använder antingen Smith & Wesson M&P eller Sig 320/250-magasin. Stern Defense AR-15 9mm Conversion Adapter installeras enkelt i vilken mil-spec AR-15 lower receiver som helst inom några sekunder och har till och med en funktion för hållning av slutvarvet öppen. Varje adapter är maskinbearbetad från aluminium och kräver användning av ett 9mm/.40 S&W-löp och en Glock-skuren bult. Tillverkad av flygplansgradigt aluminium Lätt, ergonomisk design Installeras på sekunder Om du överväger att konvertera din AR-15 till en 9mm, ge Stern Defense Adapter en tanke!
3799SEK133 799,00 kr
*
Levernastid ca. 14-21 dagar. Mer än 10 st. i centrallagret.
Produktnr: 100033498 STERN DEFENSE AR-15 9MM CONVERSION ADAPTER FOR S&W M&P/SIG 320 MAGAZINES Tillverkarens produktnummer: 001SDMAGADMP9AN850001176217 Det finns inget behov av att välja en AR-lower specifikt för pistolkaliber till ditt nästa pistolkaliberkarbinbygge. Med Stern Defense AR-15 9mm Conversion Adapter har du möjligheten att använda populära pistolmagasin som du kanske redan har ett lager av. Stern Defense tillverkar två olika modeller av sin Conversion Adapter, en som använder Glock®-magasin och en som använder antingen Smith & Wesson M&P eller Sig 320/250-magasin. Stern Defense AR-15 9mm Conversion Adapter installeras enkelt i vilken mil-spec AR-15 lower receiver som helst inom några sekunder och har till och med en funktion för hållning av slutvarvet öppen. Varje adapter är maskinbearbetad från aluminium och kräver användning av ett 9mm/.40 S&W-löp och en Glock-skuren bult. Tillverkad av flygplansgradigt aluminium Lätt, ergonomisk design Installeras på sekunder Om du överväger att konvertera din AR-15 till en 9mm, ge Stern Defense Adapter en tanke!
3799SEK03 799,00 kr
*
Restorder. Skickas när den finns i lager. Leveranstid ca 4-12 veckor från centrallagret.
There's no need to go with a pistol-caliber specific AR lower on your next pistol-caliber carbine build. With the Stern Defense AR-15 9mm Conversion Adapter you have the ability to utilize popular pistol magazines which you may already have a supply of. Stern Defense make two differ models of their Conversion Adapter, one which uses Glock® magazines, and one which uses either Smith & Wesson M&P or Sig 320/250 magazines. The Stern Defense AR-15 9mm Conversion Adapter is easily installed into any mil-spec AR-15 lower receiver within seconds and even incorporates a last-round bolt hold open feature. Each adapter is machined from aluminum and requires the use of a 9mm/.40 S&W barrel and a Glock-cut bolt. Made of aircraft grade aluminum Lightweight, ergonomic design Installs in seconds If you’re considering converting your AR-15 to a 9mm, give the Stern Defense Adapter a thought!
Mer...
Enkelt konvertera din Lower till 9mm
Det finns inget behov av att välja en AR-lower specifikt för pistolkaliber till ditt nästa pistolkaliberkarbinbygge. Med Stern Defense AR-15 9mm Conversion Adapter har du möjligheten att använda populära pistolmagasin som du kanske redan har ett lager av. Stern Defense tillverkar två olika modeller av sin Conversion Adapter, en som använder Glock®-magasin och en som använder antingen Smith & Wesson M&P eller Sig 320/250-magasin. Stern Defense AR-15 9mm Conversion Adapter installeras enkelt i vilken mil-spec AR-15 lower receiver som helst inom några sekunder och har till och med en funktion för hållning av slutvarvet öppen. Varje adapter är maskinbearbetad från aluminium och kräver användning av ett 9mm/.40 S&W-löp och en Glock-skuren bult. Tillverkad av flygplansgradigt aluminium Lätt, ergonomisk design Installeras på sekunder Om du överväger att konvertera din AR-15 till en 9mm, ge Stern Defense Adapter en tanke!
Antal betyg: 6
Från brownells.com: 6
Medelbetyg: 4,7
Great product so far.(2018-06-25)
Product is well machined and well thought out. The bolt hold open design works great as opposed to some others. Magazine release feels natural for both strong and weak side support. The only mod required was removal of the integral feed ramp because the upper is a Taccom ULW upper that already has a barrel ramp. Removing the ramp was easily accomplished with an allen wrench. The customer service rep at Stern was very helpful with this. Specs are as follows:
Taccom ULW complete upper with ramp and bolt mod,
Taccom adjustable buffer system,
Spikes mil spec multi cal lower,
Geissele of some kind
Stern 9mm Adapter(2018-06-26)
I bought this produce so I wouldnât have to but a different lower receiver. I did call Stern because it would not let me cycle the bolt with the adapter fully seated. I had bought a Foxtrot Mike upper. Stern said that for $7.50 they would mill .035 off the bolt plus shipping both ways. It works like a charm now. Very impressed with the product and Sternâs costumer service.
Use those Glock mags for PCC.(2018-06-30)
Works great with my FM upper after the bolt mod. Bolt hold open does not work with the Magpul mags. Works perfectly with glock and ETS
Building a 9mm AR Carbine on a budget can quickly become an expensive endeavor if you buy unreliable parts. The AR-15 9mm Conversion Adapter for Glock® Magazines by STERN DEFENSE Is a reliable way to use Glock magazines in a Mil-spec lower. I use it for USPSA PCC division and Steel Challenge matches to keep the feel of an M-4 and for training. Iâve personally tried other methods and this system is far superior. The feed ramp angle on 9mm is critical for proper function and reliability, with the vast array of projectile profiles. So far Iâve had luck with multiple types of 9mm projectiles I.E. Winchester 124gr FMJ, 145gr RN Bayou, and 147gr FP/HP Berryâs. The last round Bolt hold open is somewhat unnecessary for PCC, however, is great to feel the weight transfer of the bolt carrier group and buffer and have it lock on the last round.
The only feature that I dislike is the magazine release is located at the bottom of the unit which is not a big deal if your state allows âstandard capacityâ magazines. However, Iâd like index the same magazine release in the same configuration of an AR series firearm, which would be difficult without permanently modifying the magazine. Overall a great product the moment you open the package you can see that a lot of thought went into its development and manufacturer.
Awesome(2018-08-21)
Been looking for a reliable 9mm conversion for almost a year and after tons of researches (forum and YT), I decided to bite the bullet and purchase Stern Defense.
I have to say this thing is amazing, I installed this to my Anderson lower and it fits perfectly no play and nothing. To be on the safe side, I purchased Stern Defense Upper (from their website) paired with their H3 Buffer.
Went to the range today and shot 1000rounds and ZERO hiccup! I ran all kinds of ammo (freedommunitions 115/147gn, Fiocchi 115gn, and Sellier&Bellot 115gn)
All and all, I'm very satisfied with the product!
Not perfect but close(2018-10-06)
This adapter is fantastic. The pistol I used fed reliably from all the Glock mags that fit in the well, including 40 S&W and 357 SIG magazines. Installation and adjustment is a matter of turning in one screw to set it, and then two more for standoffs so it doesn't move around when you seat a new magazine.
The only reason I took off a star is because the mag release is a little awkward to use, the thing was very sticky with an aftermarket 9mm drum magazine, and the bolt hold open was a little hyper aggressive and held the bolt open with one still in the magazine.