Varukorgen är tom.

Varukorg

Hjälp och kontakt

Fri frakt på beställningar över 2.999 kr

100 dagars returrätt

Nyhetsbrev

REA

Över 300 000 kunder - vi säger tack!

4,93/5 "Mycket bra" (1400+ recensioner)

40 000+ produkter inom jakt och skytte

POWER CUSTOM
AK47 CAMPY BOB SIGHT TOOL

713000121

For AK-47 and SKS rifles with standard sights Precision made for ease of use Rear sight installation and removal tool One tool per packageJust try to install or remove the rear sight on an AK-47 rifle without making your thumb bleed. The next time you install or remove the AK-47 rear sight, do it with the Power Custom AK47 Campy Bob Sight Tool. Each tool is manufactured out of the finest materials for a long working life and for ease of use. It makes rear sight changes to your AK-47 rifle painless.

SPECS: For AK-47 and SKS rifles.

Mer...

För AK-47 och SKS-gevär med standard sikten Precisionstillverkad för enkel användning Verktyg för montering och borttagning av bakre sikte Ett verktyg per förpackningFörsök bara att montera eller ta bort det bakre siktet på ett AK-47-gevär utan att göra tummen blodig. Nästa gång du installerar eller tar bort det bakre siktet på din AK-47, gör det med Power Custom AK47 Campy Bob Sight Tool. Varje verktyg är tillverkat av de finaste materialen för en lång livslängd och för enkel användning. Det gör ändringar av det bakre siktet på ditt AK-47-gevär smärtfria.

SPECS: För AK-47 och SKS-gevär.

Mer...

Kundernas betyg påPOWER CUSTOM AK47 CAMPY BOB SIGHT TOOL

Antal betyg: 5
Från brownells.com: 5
Medelbetyg: 3,2

Limited Applications (2012-02-02)

This may be a great tool if you happen to have the specific brand AK that it is suited for. The problem is it will not work on a Saiga, or Arsenal, and I'm sure other brands/types of AKs. It was a total waste of my money. I'm very disappointed since I had planned to begin my project today, but will have to wait until I can find another way to safely remove the sight leaf on my Saiga and Arsenal AKs. I expected more from Brownells.

2nd Thoughts (2014-02-17)

After a little more research and education on how to use this tool i have to re- rate it.

Best for AK builders

Works Great As Well On The M64 RPK! (2014-05-13)

My M64 RPK from Century came with a slightly buggered rear sight leaf, so I replaced it with a N.O.S. Soviet RPK rear sight leaf. The Campy Bob Sight Tool made it quick and easy.

IMPORTANT TIP: The Gas Tube/Upper Hand Guard Assembly needs to be removed so that you have enough room for your hand to manuver the tool, and most importantly, the locking lever for the Upper Hand Guard/Gas Tube Assembly has to be free to move the attached pressure wedge that holds down on the back/top of the gas-tube, moved out of the way, so that the lower hook part of the tool can fit under the front cross member of the rear sight assembly.

The tool works brilliantly, like an old-school beer can opener before even pull tabs, which would hold under the lip/edge of the top of the can, then pivot from that hold-point and press down cutting an opening into the top of the can.

With the Campy Bob Tool positioned with the hook under the forward cross member of the rear sight, have the rear sight leaf in a vertical position, and as you engage the front tab of the LEAF SPRING that presses up on the sight from below, begin pulling up on the rear of the tool and pressing down on the top/front of the tool (like a beer-can opener in progress)allowing the sight itself to fall foward as you apply more pressure to the spring, then you'll be able to remove the old sight out the tracks to the rear, and slide the new sight forward into the tracks, hold it vertical and begin releasing pressure from the tool, allowing the leaf spring below to engage and press the sight fully home into the tops of it's holes.

Once you've done it, it all becomes so clear!

Does not fit (2016-02-08)

I have an IO AK47 and a Saiga AK74. This tool will not fit to leverage sight off of spring. Will need to find another way to do it with these rifles.

Works as advertised, if... (2016-07-30)

This tool works as advertised, IF you understand how to hook the lower hook and use it as a fulcrum lever to push down on the leaf spring. As another reviewer explained, the image of the old school can opener is a good example of how this tool works. The old openers that punched a triangular hole in the beer can, that is... You have to remove the gas tube first & foremost, that is a must in order to use this tool properly!! The lower hook on the tool looks to be too short to hook into the gas tube channel, but this is the point at which you need push hard to compress the leaf spring downward. This will allow the hook part of the tool to move more inside the gas tube channel and the hook will actually catch the channel of the gas tube. After that, it's as simple as it gets and you just push down on the leaf spring using the tool as a fulcrum. I give this tool four stars as it works as advertised, but I wish it came with some kind of instructions that included pictures so one can actually see how it works. The tool just came in a heat sealed plastic bag, and that's it. Hope this review helps out everyone!!

Läs 5 fler betyg på brownells.com

599 599 1 SEK

Produktnr: 713000121
POWER CUSTOM AK47 CAMPY BOB SIGHT TOOL
Tillverkarens produktnummer: PC-AKST För AK-47 och SKS-gevär med standard sikten Precisionstillverkad för enkel användning Verktyg för montering och borttagning av bakre sikte Ett verktyg per förpackningFörsök bara att montera eller ta bort det bakre siktet på ett AK-47-gevär utan att göra tummen blodig. Nästa gång du installerar eller tar bort det bakre siktet på din AK-47, gör det med Power Custom AK47 Campy Bob Sight Tool. Varje verktyg är tillverkat av de finaste materialen för en lång livslängd och för enkel användning. Det gör ändringar av det bakre siktet på ditt AK-47-gevär smärtfria.

599 SEK 5 599,00 kr *

Levernastid ca. 14-21 dagar.
5 st. i centrallagret.

Funktioner: Make: AK-47

Lägg till i inköpslista

Fråga om produkt

Information

Lägg till i inköpslista

Fråga om produkt

Top takeaways

Verktyg för enkel montering och borttagning av bakre sikte på AK-47 och SKS-gevär.
Precisionstillverkat av högkvalitativa material för lång livslängd och smärtfri användning.
Förhindrar skador vid justering av siktet på ditt AK-47-gevär.

Produktinformation

Make: AK-47 Leveransvikt: 0,068kg Leveranshöjd: 5mm Leveransbredd: 69mm Leveranslängd: 102mm

Produkt detaljer

Tillverkas i USA

Gör justeringar av ditt AK-47 bakre sikte smärtfria med Power Custom AK47 Campy Bob Sight Tool. 🛠️ Perfekt för enkel användning och lång livslängd!

SPECS: For AK-47 and SKS rifles.

Mer...

SPECS: För AK-47 och SKS-gevär.

Mer...

Kundernas betyg påPOWER CUSTOM AK47 CAMPY BOB SIGHT TOOL

Antal betyg: 5
Från brownells.com: 5
Medelbetyg: 3,2

Limited Applications (2012-02-02)

2nd Thoughts (2014-02-17)

After a little more research and education on how to use this tool i have to re- rate it.

Best for AK builders

Works Great As Well On The M64 RPK! (2014-05-13)

Does not fit (2016-02-08)

I have an IO AK47 and a Saiga AK74. This tool will not fit to leverage sight off of spring. Will need to find another way to do it with these rifles.

Works as advertised, if... (2016-07-30)

Läs 5 fler betyg på brownells.com

POWER CUSTOM
AK47 CAMPY BOB SIGHT TOOL

Kundernas betyg påPOWER CUSTOM AK47 CAMPY BOB SIGHT TOOL

Top takeaways

Produktinformation

Produkt detaljer

Kundernas betyg påPOWER CUSTOM AK47 CAMPY BOB SIGHT TOOL

Anslut

Säkra betalningsmetoder

Branschorganisationer

Välkommen till oss!