H-S PRECISION
REMINGTON 700 LONG ACTION DETACHABLE MAGAZINE BOTTOM METALS

393000033

Add all the convenience of drop-free, box magazine to your favorite Remington 700 BDL. Spring-loaded finger latch inside the triggerguard drops the box magazine free, speeds loading and unloading. Made from durable stainless steel and finished with bake-on, matte, black Teflon® coating that's self-lubricating and resists scratches and wear. Updated version have positive locking springs on the bottom of both sides of the floor plate (holds the magazine box securely in place without the rubber o-ring), a polymer boot on bottom of box (easier to remove), and a guide slot and larger rear catch on back of box (ensures proper latch). Can be used with multiple long action caliber.

SPECS: Stainless steel, black, matte finish. 9.3 oz.(265 g) approximate wt. Will fit Remington BDL long action stocks. May require gunsmithing/fitting. Magazine Capacity - Three rounds with standard magnum chamberings. Accepts cartridges up to 3.7" in length. The magazine lips can be adjusted for multiple applications/calibers, will not accept RUM cartridges.

Mer...

Lägg till all bekvämlighet av ett fallfritt, lådformat magasin till din favorit Remington 700 BDL. En fjäderbelastad fingerlåsning inuti avtryckarbågen gör att magasinet lossnar fritt, vilket påskyndar laddning och urladdning. Tillverkad av hållbart rostfritt stål och avslutad med en bakad på, matt, svart Teflon®-beläggning som är självsmörjande och motstår repor och slitage. Uppdaterad version har positiva låsfjädrar på botten av båda sidorna av bottenplattan (håller magasinslådan säkert på plats utan gummiringen), en polymerstövel på botten av lådan (lättare att ta bort), och en guidspår samt större bakre fångst på baksidan av lådan (säkerställer korrekt låsning). Kan användas med flera långaktionskalibrar.

SPECS: Rostfritt stål, svart, matt finish. Cirka 265 g vikt. Passar Remington BDL lång aktionskolvar. Kan kräva vapensmedsarbete/anpassning. Magasinkapacitet - Tre patroner med standard magnumkammare. Accepterar patroner upp till 3.7" i längd. Magasinläpparna kan justeras för flera användningsområden/kalibrar, accepterar inte RUM-patroner.

Mer...

Kundernas betyg påH-S PRECISION LONG ACTION MAGNUM BOTTOM METAL WITH 3RD MAGAZINE

Antal betyg: 4
Från brownells.com: 4
Medelbetyg: 4

Great product and will purchase more (2013-01-01)

Everything is quality about this product.

Extremely happy with the look and how it functions. I have installed two of these on Bell and Carlson stocks. Basically a drop in with one minor adjustment. You have to take out a 1/8 by 1/8 spot of the stock where the hinge pivots when releasing the magazine. Easily done with a dremel (I used the router bit- 5 min). Front screw flange sets a little proud but not at all a show stopper. A couple of thousandths is all. Not at all clumsy with all the hanging of the other makers bottom metal.

If converting a ADL grab some longer screws!

Customers love em!

Huge improvement over stock magazine (2015-03-23)

This was exactly what I needed for my Remington 700 Long Range chambered in 7mm Rem Mag. The internal magazine system that Remington produced for my rifle was absolute garbage. The feed lips marked up the brass terrible with deep gouges and the feed ramp is rough which scraped up the bullet during feeding. To top it all off it was a serious challenge even getting the rounds to stay in there without flying out randomly. This fine piece of equipment fixed all of that. Feeding rounds through the magazine leaves no marks or scrapes on the brass, and the bullet now bypasses the rough section of my feed ramp so no scratches on the bullet either. Some extremely minor fitting was required to my Bell and Carlson M40 stock, but it only took about 5 minutes with a file, hammer, and flat tip screwdriver to knock out a small portion for a perfect, snug fit. Overall I am very happy and would recommend this to anyone looking for a detachable mag system. Stock bottom metal screws worked just fine too!

Great DBM system (2016-08-18)

I got one of these for my R-700 Sendero 7mm magnum. Very easy installation. All you do is file a small part of the stock out and it fits well. I have these HS DBM systems for my other rifles too, and they're a big upgrade over the internal box system Remington has. If you have some extra money buy one.

Mag may drop out with recoil (2017-05-21)

I had an HS Precision rifle in .375 RUM (with HS Precision bottom metal, perhaps prior to the design improvements mentioned in the description) which I took to Africa (push-feed action, detachable mag not a good choice for dangerous game, but I was inexperienced). The rifle frequently dropped the mag on the ground with a shot, and I first thought it a problem with the latch. I sent it back to HS P and they assured me the problem was solved. It was not, and I sold the gun to a friend, with full disclosure of my concern. We were later on a safari together when (it continued to drop the mag) we figured out the problem. With a heavy recoil caliber, as the gun recoils, the shooter's finger may contact the latch release, as it is in line with the trigger, rather than below it, as in a Dakota action. Some tape wrapped around the latch release to make it require more pressure to release the mag solved the problem temporarily. A friend recently bought a custom rifle in a .300 mag and it arrived with an HS Precision bottom metal. Shot it off sticks and --- SAME PROBLEM! We are on the Brownell's site to buy a replacement bottom.

You may not have this problem with a light recoil caliber, or if shooting with the mag supported, i.e. bench or over a pack. Beware if you are shooting off-hand or off sticks. If the latch release were moved to the bottom of the trigger guard so as not to be in line with the finger upon recoil, it would solve this issue. Bottom line, I have had experience with this bottom metal twice; both drop the mag on the shot off sticks. I would only consider this bottom for light recoil calibers.

Läs 4 fler betyg på brownells.com

7499 7499 1 SEK

Produktnr: 393000033
H-S PRECISION LONG ACTION MAGNUM BOTTOM METAL WITH 3RD MAGAZINE
Tillverkarens produktnummer: AP308 Lägg till all bekvämlighet av ett fallfritt, lådformat magasin till din favorit Remington 700 BDL. En fjäderbelastad fingerlåsning inuti avtryckarbågen gör att magasinet lossnar fritt, vilket påskyndar laddning och urladdning. Tillverkad av hållbart rostfritt stål och avslutad med en bakad på, matt, svart Teflon®-beläggning som är självsmörjande och motstår repor och slitage. Uppdaterad version har positiva låsfjädrar på botten av båda sidorna av bottenplattan (håller magasinslådan säkert på plats utan gummiringen), en polymerstövel på botten av lådan (lättare att ta bort), och en guidspår samt större bakre fångst på baksidan av lådan (säkerställer korrekt låsning). Kan användas med flera långaktionskalibrar.

7499 SEK 0 7 499,00 kr *

Restorder. Skickas när den finns i lager. Leveranstid ca 4-12 veckor från centrallagret.

Funktioner: Finish: Svart Make: Remington Modell: 700

Lägg till i inköpslista

Fråga om produkt

Information

Lägg till i inköpslista

Fråga om produkt

Top takeaways

Fallfritt, lådformat magasin för Remington 700 BDL med fjäderbelastad fingerlåsning för snabb laddning och urladdning.
Tillverkad av rostfritt stål med svart, matt Teflon®-beläggning som är självsmörjande och motståndskraftig mot repor och slitage.
Uppdaterad design med positiva låsfjädrar, polymerstövel och guidspår för säker och enkel användning, kompatibel med flera långaktionskalibrar.

Produktinformation

Finish: Svart Make: Remington Modell: 700 Leveransvikt: 0,272kg Leveranshöjd: 25mm Leveransbredd: 76mm Leveranslängd: 152mm