Easily Removes Broken Cases Without Field Stripping
Case head separation from over-fired or out of spec brass wonât ruin your shooting experience if you keep one of these handy tools in your pocket or field kit. Hardened, steel tool reliably and easily removes broken cases from AR-type or any other firearm chambered for the .223/5.56 NATO or .308/7.62 NATO cartridges. Exclusive, threaded, two-piece design is adjustable for overall length, so the tool completely engages the rim of the case mouth; cannot slip through or strip out. Very simple to use, drop the broken shell extractor into the chamber directly inside the broken case. Allow the bolt to close so the extractor engages the rim of the tool and draw back the bolt to open the chamber. The broken case will eject along with the broken shell extractor.
SPECS: Steel, blue. Models for .223 Remington/5.56 NATO or .308 Winchester/7.62 NATO cartridges.
Mer...
Tar enkelt bort trasiga hylsor utan att demontera pÄ fÀltet
Fallhuvudseparation frÄn övereldad eller specifikationsvidrig mÀssing behöver inte förstöra din skytteupplevelse om du har ett av dessa praktiska verktyg i fickan eller fÀltkitet. Det hÀr hÀrdade, stÄlverktyget tar pÄlitligt och enkelt bort trasiga hylsor frÄn AR-typer eller andra vapen som Àr kammade för .223/5.56 NATO eller .308/7.62 NATO patroner. Den exklusiva, gÀngade tvÄdelade designen Àr justerbar i total lÀngd, sÄ verktyget griper helt runt hylsmynningens kant; det kan inte glida igenom eller stripa ur. Mycket enkelt att anvÀnda, slÀpp ner den trasiga hylsutdragaren i kammaren direkt inuti den trasiga hylsan. LÄt slutstycket stÀnga sÄ att utdragaren griper om verktygets kant och dra tillbaka slutstycket för att öppna kammaren. Den trasiga hylsan kommer att kastas ut tillsammans med den trasiga hylsutdragaren.
SPECS: StÄl, blÄ. Modeller för .223 Remington/5.56 NATO eller .308 Winchester/7.62 NATO patroner.
Antal betyg: 10
FrÄn brownells.com: 10
Medelbetyg: 4,8
A Lifesaver!(2014-10-10)
A lousy TulAmmo steel shell (1st and LAST round of that I'll ever use) separated around the rim in my 7.62 AR. Insert into broken shell with the rifle assembled & @ inspection; you need the bolt to drive it home. It took effort to get the extractor set correctly in the shell (had to drive it in hard and splay the tips out to shoulder the shell properly). The 3rd try finally got it loose, but I had to use a cleaning rod & plastic collet to help it out in the end. The bolt took some edge off of the extractor's rim while driving it in; it is probably only good for a few attempts. A good gunsmith's rod & collet set is likely more effective & durable, but this is a MUST for a field kit. Saved me a trip to the gunsmith!
Perfect(2015-08-25)
Worked absolutely perfectly!
Safe Insurance(2017-07-04)
Works well, don't need a cleaning rod to use.
A MUST FOR AR-15 SHOOTERS(2009-12-12)
IF YOU BREAK THE BACK OFF A SHELL IN YOUR GUN YOUR IN TROUBLE. DONT TRY AND PUSH IT OUT WITH A CLEANING ROD, YOU COULD SCRATCH THE BORE. USE ONE OF THESE EXTRACTORS, JUST PUT IT IN THE RECEIVER LIKE YOU WOULD A LOADED ROUND AND EJECT THE BROKEN CASE. EVERY AR SHOOTER SHOULD HAVE ONE IN THERE KIT.
What a life saver!(2010-05-01)
I just got home from our 3 gun shoot and would have been shut down with a stuck case on the first stage if a friend didn't have one of these in his goodie bag. Took it out of the package and got my case removed without any problems even though I had never even seen one before and was back in the game. I even won my class!! I'll be buying my own directly.
This one works(2010-07-22)
I had a second broken shell to extract. I tried an extractor from another maker that completely failed to remove my first broken shell. When this break happened, I ordered this extractor after seeing its design is quite different.
This one simply works.
The design of the prongs makes it much easier for the tool to engage the shell and they can be spread slightly to engage more authoritatively. Also, this tool actually fit the bolt (unlike the other tool I tried) allowing the bolt to pull the tool from the chamber. I would definitely recommend every AR shooter keep one of these in their range bag.
One note: Be sure the rubber O-ring is set in the tool before use. Otherwise the extractor will seat too deeply into the chamber requiring the user to tap it out with a rod rather than have the bolt engage.
Works(2011-06-23)
Easy to use, easy to store in the VDG on your AR15.
Broken Shell Exatractor a must have(2013-07-04)
Any AR shooter will tell you that this item is a must have if you ever shoot Mil Grade ammo or the bargan brands, quick fix and a headache saver!
This item works.(2014-02-08)
Well designed product that removes the shell case as advertised.
Produktnr: 080000530 BROWNELLS .308 BROKEN SHELL EXTRACTOR050806006300 Fallhuvudseparation frÄn övereldad eller specifikationsvidrig mÀssing behöver inte förstöra din skytteupplevelse om du har ett av dessa praktiska verktyg i fickan eller fÀltkitet. Det hÀr hÀrdade, stÄlverktyget tar pÄlitligt och enkelt bort trasiga hylsor frÄn AR-typer eller andra vapen som Àr kammade för .223/5.56 NATO eller .308/7.62 NATO patroner. Den exklusiva, gÀngade tvÄdelade designen Àr justerbar i total lÀngd, sÄ verktyget griper helt runt hylsmynningens kant; det kan inte glida igenom eller stripa ur. Mycket enkelt att anvÀnda, slÀpp ner den trasiga hylsutdragaren i kammaren direkt inuti den trasiga hylsan. LÄt slutstycket stÀnga sÄ att utdragaren griper om verktygets kant och dra tillbaka slutstycket för att öppna kammaren. Den trasiga hylsan kommer att kastas ut tillsammans med den trasiga hylsutdragaren.
699SEK0699,00 kr
*
Restorder. Skickas nÀr den finns i lager. Leveranstid ca 4-12 veckor frÄn centrallagret.
Det hÀrdade stÄlverktyget tar pÄlitligt bort trasiga hylsor frÄn AR-typer eller andra vapen kammade för .223/5.56 NATO eller .308/7.62 NATO patroner.
Den exklusiva, gÀngade tvÄdelade designen Àr justerbar i total lÀngd för att gripa runt hylsmynningens kant utan att glida eller stripa ur.
Mycket enkelt att anvÀnda: SlÀpp ner den trasiga hylsutdragaren i kammaren, lÄt slutstycket stÀnga och dra tillbaka för att kasta ut den trasiga hylsan tillsammans med utdragaren.
Produktnr: 080000441 BROWNELLS .223 BROKEN SHELL EXTRACTOR050806006140 Fallhuvudseparation frÄn övereldad eller specifikationsvidrig mÀssing behöver inte förstöra din skytteupplevelse om du har ett av dessa praktiska verktyg i fickan eller fÀltkitet. Det hÀr hÀrdade, stÄlverktyget tar pÄlitligt och enkelt bort trasiga hylsor frÄn AR-typer eller andra vapen som Àr kammade för .223/5.56 NATO eller .308/7.62 NATO patroner. Den exklusiva, gÀngade tvÄdelade designen Àr justerbar i total lÀngd, sÄ verktyget griper helt runt hylsmynningens kant; det kan inte glida igenom eller stripa ur. Mycket enkelt att anvÀnda, slÀpp ner den trasiga hylsutdragaren i kammaren direkt inuti den trasiga hylsan. LÄt slutstycket stÀnga sÄ att utdragaren griper om verktygets kant och dra tillbaka slutstycket för att öppna kammaren. Den trasiga hylsan kommer att kastas ut tillsammans med den trasiga hylsutdragaren.
419SEK0419,00 kr
*
Restorder. Skickas nÀr den finns i lager. Leveranstid ca 4-12 veckor frÄn centrallagret.
Easily Removes Broken Cases Without Field Stripping
Case head separation from over-fired or out of spec brass wonât ruin your shooting experience if you keep one of these handy tools in your pocket or field kit. Hardened, steel tool reliably and easily removes broken cases from AR-type or any other firearm chambered for the .223/5.56 NATO or .308/7.62 NATO cartridges. Exclusive, threaded, two-piece design is adjustable for overall length, so the tool completely engages the rim of the case mouth; cannot slip through or strip out. Very simple to use, drop the broken shell extractor into the chamber directly inside the broken case. Allow the bolt to close so the extractor engages the rim of the tool and draw back the bolt to open the chamber. The broken case will eject along with the broken shell extractor.
SPECS: Steel, blue. Models for .223 Remington/5.56 NATO or .308 Winchester/7.62 NATO cartridges.
Mer...
Tar enkelt bort trasiga hylsor utan att demontera pÄ fÀltet
Fallhuvudseparation frÄn övereldad eller specifikationsvidrig mÀssing behöver inte förstöra din skytteupplevelse om du har ett av dessa praktiska verktyg i fickan eller fÀltkitet. Det hÀr hÀrdade, stÄlverktyget tar pÄlitligt och enkelt bort trasiga hylsor frÄn AR-typer eller andra vapen som Àr kammade för .223/5.56 NATO eller .308/7.62 NATO patroner. Den exklusiva, gÀngade tvÄdelade designen Àr justerbar i total lÀngd, sÄ verktyget griper helt runt hylsmynningens kant; det kan inte glida igenom eller stripa ur. Mycket enkelt att anvÀnda, slÀpp ner den trasiga hylsutdragaren i kammaren direkt inuti den trasiga hylsan. LÄt slutstycket stÀnga sÄ att utdragaren griper om verktygets kant och dra tillbaka slutstycket för att öppna kammaren. Den trasiga hylsan kommer att kastas ut tillsammans med den trasiga hylsutdragaren.
SPECS: StÄl, blÄ. Modeller för .223 Remington/5.56 NATO eller .308 Winchester/7.62 NATO patroner.
Antal betyg: 10
FrÄn brownells.com: 10
Medelbetyg: 4,8
A Lifesaver!(2014-10-10)
A lousy TulAmmo steel shell (1st and LAST round of that I'll ever use) separated around the rim in my 7.62 AR. Insert into broken shell with the rifle assembled & @ inspection; you need the bolt to drive it home. It took effort to get the extractor set correctly in the shell (had to drive it in hard and splay the tips out to shoulder the shell properly). The 3rd try finally got it loose, but I had to use a cleaning rod & plastic collet to help it out in the end. The bolt took some edge off of the extractor's rim while driving it in; it is probably only good for a few attempts. A good gunsmith's rod & collet set is likely more effective & durable, but this is a MUST for a field kit. Saved me a trip to the gunsmith!
Perfect(2015-08-25)
Worked absolutely perfectly!
Safe Insurance(2017-07-04)
Works well, don't need a cleaning rod to use.
A MUST FOR AR-15 SHOOTERS(2009-12-12)
IF YOU BREAK THE BACK OFF A SHELL IN YOUR GUN YOUR IN TROUBLE. DONT TRY AND PUSH IT OUT WITH A CLEANING ROD, YOU COULD SCRATCH THE BORE. USE ONE OF THESE EXTRACTORS, JUST PUT IT IN THE RECEIVER LIKE YOU WOULD A LOADED ROUND AND EJECT THE BROKEN CASE. EVERY AR SHOOTER SHOULD HAVE ONE IN THERE KIT.
What a life saver!(2010-05-01)
I just got home from our 3 gun shoot and would have been shut down with a stuck case on the first stage if a friend didn't have one of these in his goodie bag. Took it out of the package and got my case removed without any problems even though I had never even seen one before and was back in the game. I even won my class!! I'll be buying my own directly.
This one works(2010-07-22)
I had a second broken shell to extract. I tried an extractor from another maker that completely failed to remove my first broken shell. When this break happened, I ordered this extractor after seeing its design is quite different.
This one simply works.
The design of the prongs makes it much easier for the tool to engage the shell and they can be spread slightly to engage more authoritatively. Also, this tool actually fit the bolt (unlike the other tool I tried) allowing the bolt to pull the tool from the chamber. I would definitely recommend every AR shooter keep one of these in their range bag.
One note: Be sure the rubber O-ring is set in the tool before use. Otherwise the extractor will seat too deeply into the chamber requiring the user to tap it out with a rod rather than have the bolt engage.
Works(2011-06-23)
Easy to use, easy to store in the VDG on your AR15.
Broken Shell Exatractor a must have(2013-07-04)
Any AR shooter will tell you that this item is a must have if you ever shoot Mil Grade ammo or the bargan brands, quick fix and a headache saver!
This item works.(2014-02-08)
Well designed product that removes the shell case as advertised.