Varukorgen är tom.

Varukorg

Hjälp och kontakt

Fri frakt på beställningar över 2.999 kr

100 dagars returrätt

Nyhetsbrev

REA

Över 300 000 kunder - vi säger tack!

4,93/5 "Mycket bra" (1400+ recensioner)

40 000+ produkter inom jakt och skytte

HARRIS GUNWORKS
SAKO-STYLE EXTRACTOR KIT

562102001

Convert Remington Bolts For Reliable Extraction

Complete parts kit converts Remington 700 bolts to use a larger, Sako-style extractor which grabs a bigger bite of case rim for increased extractor performance.

SPECS: 17-4 stainless steel extractor. Kit includes extractor, plunger pin and spring. Installation requires machining of bolt. .308 is .234" wide and suitable for cartridges from .308 Win through .505 Gibbs. .223 is .170 wide. Suitable for .223 based and other small rimmed cartridges.

Mer...

Konvertera Remington slutstycken för pålitlig extraktion

Komplett delkit konverterar Remington 700 slutstycken för att använda en större, Sako-stil extraktor som tar ett större grepp om hylskanten för ökad prestanda hos extraktorn.

SPECS: Extraktor i 17-4 rostfritt stål. Kitet inkluderar extraktor, stötplugg och fjäder. Installation kräver bearbetning av slutstycket. .308 är .234" bred och lämplig för patroner från .308 Win till .505 Gibbs. .223 är .170 bred. Lämplig för .223-baserade och andra småkantiga patroner.

Mer...

Kundernas betyg påHARRIS GUNWORKS .223 SAKO-STYLE EXTRACTOR KIT

Antal betyg: 3
Från brownells.com: 3
Medelbetyg: 2,7

arris Sako Style Extractor (2009-10-25)

I have installed several of these, both on std and magnum rifles and have found that the extractor spring seems to be weak. Also, the "tongue" on the exractor plunger, if drilled where indicated, will not put enough force on the top rim of the extractor to hold the cartridge well enough to allow reliable extraction.

I have moved the pluger hole off bottom about .005-.008" and found that helped some. In most cases, I have had to reshape the plunger also to get it to function at all.

The design is great - but it takes a lot of effort to get it to work.

I will be calling the manufacturer for their input.

Harris kit comes with bad instructions (2016-06-14)

These kits have been backordered for ages and now that we've received them we are highly disappointed in the instructions that they came with. The directions clearly indicate drilling with a drill bit smaller than the size of the stud/pin on the extractor. The dimension on the milling slot is wrong. That leads to the placement of the hole being off from their numbers as well.

We have contacted Harris Barrelworks to discuss the issues and get an update on what percent oversized the stud/pin hole is meant to be over the stud dimension. Unfortunately the person who designed them and knows best is out of the shop and will not be able to get back to us for at least a week. All in all, these errors in the written instructions leave us with less faith in the overall product.

The past '09 review by Butch was in line with our past experiences with previously available products, but as of now we don't think an alteration to the extractor to fit will be necessary like it used to be. Of course, until we get the correct numbers lined out we won't know for sure.

I installed it myself. (2016-02-23)

You MUST have a milling machine to install this. You CANNOT do it on a drill press. It is not for the 1st time user. you have to have experience in installing one. if you screw it up, you will need a new bolt. That being said. it works great, better than the Remington style. Gave it 4 stars. just because of the amount of machining and fixtures needed to do it.

<img width="500" src='/userdocs/reviewimages/e07d0c07-a9fa-4b60-83c1-d3d118b30786.jpg' alt=''>

Läs 3 fler betyg på brownells.com

1049 1099 2 SEK

Produktnr: 562102001
HARRIS GUNWORKS .223 SAKO-STYLE EXTRACTOR KIT
Tillverkarens produktnummer: NONE Komplett delkit konverterar Remington 700 slutstycken för att använda en större, Sako-stil extraktor som tar ett större grepp om hylskanten för ökad prestanda hos extraktorn.

1099 SEK 0 1 099,00 kr *

Ej tillgänglig.

Funktioner: Make: Remington Modell: 700

Lägg till i inköpslista

Fråga om produkt

Information

Lägg till i inköpslista

Fråga om produkt

Produktinformation

Make: Remington Modell: 700 Leveransvikt: 0,005kg Leveransbredd: 57mm Leveranslängd: 89mm

Produkt detaljer

Tillverkas i USA
USA: s exportklassificering: 0A501.x

Produktnr: 562102000
HARRIS GUNWORKS .308 SAKO-STYLE EXTRACTOR KIT
Tillverkarens produktnummer: NONE Komplett delkit konverterar Remington 700 slutstycken för att använda en större, Sako-stil extraktor som tar ett större grepp om hylskanten för ökad prestanda hos extraktorn.

1049 SEK 0 1 049,00 kr *

Ej tillgänglig.

Funktioner: Make: Remington Modell: 700

Lägg till i inköpslista

Fråga om produkt

Information

Lägg till i inköpslista

Fråga om produkt

Uppgradera din Remington 700 med SAKO-STYLE EXTRACTOR KIT 🔧 för ökad prestanda och pålitlighet. Passar .223 och mer!

Convert Remington Bolts For Reliable Extraction

Complete parts kit converts Remington 700 bolts to use a larger, Sako-style extractor which grabs a bigger bite of case rim for increased extractor performance.

Mer...

Konvertera Remington slutstycken för pålitlig extraktion

Komplett delkit konverterar Remington 700 slutstycken för att använda en större, Sako-stil extraktor som tar ett större grepp om hylskanten för ökad prestanda hos extraktorn.

Mer...