Varukorgen är tom.

Varukorg

Hjälp och kontakt

Fri frakt på beställningar över 2.999 kr

100 dagars returrätt

Nyhetsbrev

REA

Över 300 000 kunder - vi säger tack!

4,93/5 "Mycket bra" (1400+ recensioner)

40 000+ produkter inom jakt och skytte

BROWNELLS
1911 TRIGGER STIRRUP DIE

050806104143 080710045

Forms Stirrup For Precise Trigger Pull

Makes it easy to smooth out the bends and bumps found in production triggers and match-fit them for precise, no-wobble travel. Slide a trigger over the die and tap lightly around it with a small hammer. Maintains correct shape and angles. Dual use, lets you save dinged and damaged ones too.

SPECS: Hardened Steel. Single-Stack - 1-15⁄16" (23.8mm) long, 5⁄8" (15.9mm) thick, 1½" (3.8cm) high.

Mer...

Formar Stirrup för Exakt Triggerdragning

Gör det enkelt att jämna ut böjningar och ojämnheter som finns i produktionstriggers och anpassa dem för exakt, spel-fri rörelse. Trä en trigger över stansen och knacka lätt runtomkring med en liten hammare. Bibehåller korrekt form och vinklar. Dubbel användning, låter dig även rädda nerslagna och skadade triggers.

SPECS: Härdat stål. Single-Stack - 1-15⁄16" (23.8mm) lång, 5⁄8" (15.9mm) tjock, 1½" (3.8cm) hög.

Mer...

Kundernas betyg påBROWNELLS 1911 SINGLE-STACK TRIGGER STIRRUP DIE

Antal betyg: 5
Från brownells.com: 5
Medelbetyg: 4

Worth the price (2009-12-18)

I tried for a few trigger jobs to place my fingers inside the stirrup to perform the stone work. Each time I ended up with a less than perfect stirrup, which I had to tweak to straighten back for a uniform contact to the trigger track. All of that changed when I bought this jig. It has enough length to fit in your vise, and the best part about this jig is that it will work with any range of LOP. If you do get a trigger that has a bowed/narrowed stirrup the die is solid steel so a few taps from the plastic coated hammer fixes it with no problem. While you are at it, take a look at the track. If it is not smooth, all the stirrup work you did will be for nothing if the track is rough. Brownells has a track stone that is worth looking at.
Hope this helps, that's my $.02

Simple, effective, easy to use (2011-05-21)

Got this to fix a less then perfect trigger job and it worked great. A few taps with a nylon hammer and the little waves that ran through my trigger bow were gone. Great for touch ups or if planning to drop in a new trigger.

A great paperweight (2012-04-04)

On paper, this tool seems like a great idea - the ability to re-shape a trigger bow. The problem is that if a trigger has been damaged or bent, it is almost impossible to restore it to its original shape. The hard trigger bow steel is springy and does not simply re-form itself to the die with a few hammer taps. In fact, hammering the trigger bow will stretch the metal and distort it even further. No two 1911 frames are alike. That's why you have to fit each trigger separately. If you have a damaged trigger bow, the only real solution is to replace the trigger.

excellent product amazing!!! awesome!!!! (2012-06-21)

I tried the stirrup on a oem norinco trigger bow. I had to tap it down to conform to the stirrup and tapped it with a brass hammer. It is so easy to use and gets your trigger bow back in line I didn' have any problems of any sort using this stirrup. I should have gotten this stirrup long ago. Excellent is all I have to say about this stirrup.

Does the job! (2012-11-22)

Just follow instructions and you're in the ball park; use trigger track stone to smooth frame. Polish bow and you're done. Without this die, you're in for a lot of work, if not impossible!

Läs 5 fler betyg på brownells.com

549 549 1 SEK

Produktnr: 080710045
BROWNELLS 1911 SINGLE-STACK TRIGGER STIRRUP DIE 050806104143 Gör det enkelt att jämna ut böjningar och ojämnheter som finns i produktionstriggers och anpassa dem för exakt, spel-fri rörelse. Trä en trigger över stansen och knacka lätt runtomkring med en liten hammare. Bibehåller korrekt form och vinklar. Dubbel användning, låter dig även rädda nerslagna och skadade triggers.

549 SEK 17 549,00 kr *

Levernastid ca. 14-21 dagar.
Mer än 10 st. i centrallagret.

Funktioner: Make: 1911 Modell: Government, Commander, Officers

Lägg till i inköpslista

Fråga om produkt

Information

Lägg till i inköpslista

Fråga om produkt

Top takeaways

Enkelt att jämna ut böjningar och ojämnheter i produktionstriggers för exakt, spel-fri rörelse.
Dubbel användning: kan även rädda nerslagna och skadade triggers.
Specifikationer: Härdat stål, Single-Stack, 1-15⁄16" lång, 5⁄8" tjock, 1½" hög.

Produktinformation

Make: 1911 Modell: Commander,Government,Officers Leveransvikt: 0,159kg Leveranshöjd: 15mm Leveransbredd: 69mm Leveranslängd: 140mm UPC : 050806104143

Produkt detaljer

Tillverkas i USA

Jämna ut och anpassa din 1911 trigger med BROWNELLS Trigger Stirrup Die. 🛠️ Perfekt för exakt, spel-fri rörelse och reparation av skadade triggers.

Forms Stirrup For Precise Trigger Pull

SPECS: Hardened Steel. Single-Stack - 1-15⁄16" (23.8mm) long, 5⁄8" (15.9mm) thick, 1½" (3.8cm) high.

Mer...

Formar Stirrup för Exakt Triggerdragning

SPECS: Härdat stål. Single-Stack - 1-15⁄16" (23.8mm) lång, 5⁄8" (15.9mm) tjock, 1½" (3.8cm) hög.

Mer...

Kundernas betyg påBROWNELLS 1911 SINGLE-STACK TRIGGER STIRRUP DIE

Antal betyg: 5
Från brownells.com: 5
Medelbetyg: 4

Worth the price (2009-12-18)

Simple, effective, easy to use (2011-05-21)

A great paperweight (2012-04-04)

excellent product amazing!!! awesome!!!! (2012-06-21)

Does the job! (2012-11-22)

Just follow instructions and you're in the ball park; use trigger track stone to smooth frame. Polish bow and you're done. Without this die, you're in for a lot of work, if not impossible!

Läs 5 fler betyg på brownells.com