Made to original specifications for rebuilding existing guns or assembling new guns built to factory Government or Commander configurations. Heat-treated, recoil spring plug resists wear and battering. Checkered recoil spring plug gives a traditional look - just like the Colt factory part.
Tillverkad enligt originalspecifikationer för att renovera befintliga vapen eller montera nya vapen byggda enligt fabrikens Government eller Commander konfigurationer. Värmebehandlad, rekylfjäderplugg som motstår slitage och stötning. Räfflad rekylfjäderplugg ger ett traditionellt utseende - precis som Colts fabriksdel.
Kundernas betyg påED BROWN COMMANDER RECOIL SPRING PLUG, BLUE
Antal betyg: 8
Från brownells.com: 8
Medelbetyg: 4,5
Commander Recoil Spring Plug(2011-08-06)
The Recoil Spring Plugs work great. [...] Thanks!
ed brown stainless plug(2013-12-01)
i purchased this plug to replace the the plug on a stainless Taurus PT1911. it does not fit. the inside dimensions of this plug will not allow it to be depressed enuf for the barrel bushing to clear it for install. this is not a reflection on the quality of the product, just letting you know it wont fit Taurus.
Does what is says(2009-11-07)
Does what its supposed to do.
Looks great, works great(2011-05-13)
Used this on a full size, stainless gun. Works great and looks great. If your gun has a full length guide rod, don't forget to get a standard lenght unit!
Good Part, Fits well(2012-04-23)
great part. bought it to swap out the full length guide rod in my Taurus PT 1911. Pretty much drop in. only thing that kept it from a perfect rating in my book was that the finish is already going away after about 2 months. Not a big deal as my gun is carried and has a lot of rounds through it, but worth noting either way.
Good fit and color match.(2013-11-01)
I used this to replace a full length guide rod plug in my Rock Island Armory 1911 A-1 FS. Along with an Ed Brown government recoil spring guide and a Wolff 18.5 lb. government model variable power recoil spring, I was able to ditch the FLGR and associated impostor parts. Now it works as it was designed and makes for an easier field strip.
Sufficient but Not as described(2013-11-28)
I honestly cannot give it less than 5 stars because there is nothing wrong with it, but I wanted to point out to any potential buyers that this particular one is BLUED. The picture doesn't look black until its enlarged and juxtaposed against the next one down (which is black) assures your that it is stainless. Had I read the description and not trusted the picture I would have seen. No one to blame but myself, but thought you guys might want to know.
Great, perfect fit with Springer Loaded(2016-12-06)
as previous reviewer mentioned its blued, see 2nd pic, but looks great, especially for the price. perfect fit with my Springer Loaded and the Wilson Flat spring/rod kit i also swapped in.
Produktnr: 087000020 ED BROWN COMMANDER RECOIL SPRING PLUG, BLUE Tillverkarens produktnummer: 881CMDB800732881058 Tillverkad enligt originalspecifikationer för att renovera befintliga vapen eller montera nya vapen byggda enligt fabrikens Government eller Commander konfigurationer. Värmebehandlad, rekylfjäderplugg som motstår slitage och stötning. Räfflad rekylfjäderplugg ger ett traditionellt utseende - precis som Colts fabriksdel.
289SEK0289,00 kr
*
Restorder. Skickas när den finns i lager. Leveranstid ca 4-12 veckor från centrallagret.
Tillverkas i USA
USA: s exportklassificering: 0A501.x
Destination Control Statement: Dessa poster styrs av USA: s regering och godkänns endast för export till det land där den slutliga destinationen används av den slutliga mottagaren eller slutanvändaren som identifierats här. De får inte vidareförsäljas, överföras eller på annat sätt kasseras till något annat land eller någon annan än den godkända slutliga mottagaren eller slutanvändaren, antingen i sin ursprungliga form eller efter att ha monterats i andra föremål utan att först få godkännande från den amerikanska regeringen eller som annars är tillåten enligt amerikansk lag och förordningar.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Produktnr: 087881001 ED BROWN GOVERNMENT RECOIL SPRING PLUG, BLUE Tillverkarens produktnummer: 881-STDB800732881010 Tillverkad enligt originalspecifikationer för att renovera befintliga vapen eller montera nya vapen byggda enligt fabrikens Government eller Commander konfigurationer. Värmebehandlad, rekylfjäderplugg som motstår slitage och stötning. Räfflad rekylfjäderplugg ger ett traditionellt utseende - precis som Colts fabriksdel.
279SEK2279,00 kr
*
Levernastid ca. 14-21 dagar. 2 st. i centrallagret.
Produktnr: 087000030 ED BROWN COMMANDER RECOIL SPRING PLUG, STAINLESS Tillverkarens produktnummer: 881CMDS800732881041 Tillverkad enligt originalspecifikationer för att renovera befintliga vapen eller montera nya vapen byggda enligt fabrikens Government eller Commander konfigurationer. Värmebehandlad, rekylfjäderplugg som motstår slitage och stötning. Räfflad rekylfjäderplugg ger ett traditionellt utseende - precis som Colts fabriksdel.
289SEK1289,00 kr
*
Levernastid ca. 14-21 dagar. 1 st. i centrallagret.
Made to original specifications for rebuilding existing guns or assembling new guns built to factory Government or Commander configurations. Heat-treated, recoil spring plug resists wear and battering. Checkered recoil spring plug gives a traditional look - just like the Colt factory part.
Tillverkad enligt originalspecifikationer för att renovera befintliga vapen eller montera nya vapen byggda enligt fabrikens Government eller Commander konfigurationer. Värmebehandlad, rekylfjäderplugg som motstår slitage och stötning. Räfflad rekylfjäderplugg ger ett traditionellt utseende - precis som Colts fabriksdel.
Kundernas betyg påED BROWN COMMANDER RECOIL SPRING PLUG, BLUE
Antal betyg: 8
Från brownells.com: 8
Medelbetyg: 4,5
Commander Recoil Spring Plug(2011-08-06)
The Recoil Spring Plugs work great. [...] Thanks!
ed brown stainless plug(2013-12-01)
i purchased this plug to replace the the plug on a stainless Taurus PT1911. it does not fit. the inside dimensions of this plug will not allow it to be depressed enuf for the barrel bushing to clear it for install. this is not a reflection on the quality of the product, just letting you know it wont fit Taurus.
Does what is says(2009-11-07)
Does what its supposed to do.
Looks great, works great(2011-05-13)
Used this on a full size, stainless gun. Works great and looks great. If your gun has a full length guide rod, don't forget to get a standard lenght unit!
Good Part, Fits well(2012-04-23)
great part. bought it to swap out the full length guide rod in my Taurus PT 1911. Pretty much drop in. only thing that kept it from a perfect rating in my book was that the finish is already going away after about 2 months. Not a big deal as my gun is carried and has a lot of rounds through it, but worth noting either way.
Good fit and color match.(2013-11-01)
I used this to replace a full length guide rod plug in my Rock Island Armory 1911 A-1 FS. Along with an Ed Brown government recoil spring guide and a Wolff 18.5 lb. government model variable power recoil spring, I was able to ditch the FLGR and associated impostor parts. Now it works as it was designed and makes for an easier field strip.
Sufficient but Not as described(2013-11-28)
I honestly cannot give it less than 5 stars because there is nothing wrong with it, but I wanted to point out to any potential buyers that this particular one is BLUED. The picture doesn't look black until its enlarged and juxtaposed against the next one down (which is black) assures your that it is stainless. Had I read the description and not trusted the picture I would have seen. No one to blame but myself, but thought you guys might want to know.
Great, perfect fit with Springer Loaded(2016-12-06)
as previous reviewer mentioned its blued, see 2nd pic, but looks great, especially for the price. perfect fit with my Springer Loaded and the Wilson Flat spring/rod kit i also swapped in.