Design Enhancements For Superior Performance; Standard & Ambidextrous Models
Novak takes the 1911 safety a step further with streamlined styling and several operating enhancements. A re-designed detent enables extremely positive engagement and helps hold the plunger tube against the frame to keep it from working loose. The right-hand paddle on the ambidextrous model is keyed and pinned to the shaft to prevent flex and eliminate the need for the grip to hold the right lever in place. It also permits a much slimmer paddle that works with any grip, including LaserGrips. Completely âcarry beveledâ with all sharp edges removed for shooter comfort and control.
SPECS: Carbon steel, blued, or stainless steel, natural finish. Fitting required for installation. Gunsmith installation recommended.
Novak tar 1911-sÀkerheten ett steg lÀngre med strömlinjeformad stil och flera funktionsförbÀttringar. En omkonstruerad spÀrr möjliggör extremt positivt engagemang och hjÀlper till att hÄlla plungröret mot ramen för att förhindra att det lossnar. Paddeln pÄ höger sida pÄ den ambidextra modellen Àr försedd med nyckel och stiftad till axeln för att förhindra flex och eliminera behovet av att greppet hÄller den högra spaken pÄ plats. Det tillÄter ocksÄ en mycket smalare paddel som fungerar med alla grepp, inklusive LaserGrips. Helt "carry beveled" med alla vassa kanter borttagna för skyttens komfort och kontroll.
SPECS: KolstÄl, blÄnerat, eller rostfritt stÄl, naturlig finish. Passning krÀvs för installation. Installation av en busskytt rekommenderas.
Antal betyg: 8
FrÄn brownells.com: 8
Medelbetyg: 3,4
Novak NXT ambi excellent(2015-04-27)
Excellent product however the description works with laser grips is not 100% accurate. Some grips have the laser module reduced but I found it necessary to trim the right side lever to clear the laser on my older CT laser grips.
It does not say in the product description, but you will need a 1/16" roll pin starter and a 1/16" roll pin punch to secure the right side lever. Only one roll pin ships with the package 1/16x 0.270, not a size listed in the roll pin section of the catalog. Order some spare roll pins.
The ambi safety functions just fine as a single side and I suggest that you fit and used the safety for a while before pinning the final assembly. I could have saved a lot of money if I'd bought the Novak safety before a less expensive ambi safety.
instrutions should be included.(2013-04-27)
just like a kid, i was so excited to get my package today. it looked even better than expected. i mean, man, great part. this was the most expensive one yet, and i would rate a 5 easily if some one had included a how to get the tiny little pin in the tiny little hole to fasten the right side! what a pain! finally had it launch so far off the table i dont think i will EVER find it. so one nice pistole in my collection is gonna be out of commishion till i find a replacement and a clue on how to get finished. i mean come on! could they make one end slightly smaller so we can get it started?
uncomfortable for lefties(2016-09-08)
If you are lefthanded and shoot with your thumb on the safety this is not the safety for you. It is very uncomfortable. My gunsmith fit it to my 1911 so I can not send it back.
matte not stainless(2012-11-01)
in the description it states stainless steel but it is powered coat a dull grey. did not fit kimber custom II
This extended safety is a winner.(2012-11-10)
This extended thumb safety fills the niche for tactical or competition shooting. It requires gunsmith fitting as the sear contact ledge is oversized to fit to your specific gun. The dimensions and specs are absolutely precise with the contact points and pin axis aligned perfectly. After fitting, there was no slack or bounce while gripping the pistol.
Some tips: You might need to lightly bevel the safety's lug corner radius at the channel - so it won't shave your frame cutout. You can blend the corners of the safety with your Dremel to match your frame and beavertail. The polished surfaces contrast nicely with the matte finish.
Ambidextrous safeties are okay for many shooters, but this single side safety fits my shooting grip with better ergonomics. It allows a lower bore axis and more solid shooting platform without that weak-side safety lever pressing into your metacarpo-phalangeal joint.
The precision of manufacture is impressive. This part is even better than the King's Safety of years past.
Bravo, Novak.
Why did I order two?? (2016-03-21)
That was a mistake. First, my "stainless" safety came with a powder coated dark gray paint on it which took an hour to sand off with #320 paper. The sear lug had enough meat on it for proper fitting so that was OK. The problem with this unit is the profile at the front edge just below the detent for the plunger. It is cut back too far allowing the tip of the plunger to extend out of the plunger tube too far. Comparing it to my safeties from Colt, Dan Wesson and EGW the difference is obvious. In time, the over-extended plunger will oval out the end of the plunger tube. Not a problem if you have spare plunger tubes and a staking tool. But why bother. I'll stick with the EGW.
Perfect(2012-10-25)
Switched out an ambi safety on my Springfield duty gun. I had also ordered an Ed Brown tactical safety which paled in comparison, both in finish and function. Paddle is a nice medium size. Design keeps the safety from rubbing the frame. Detent is is secure; I polished the plunger for smooth movement. Finish perfect for a parkerized pistol, would be dull on a blued one.
Novak NXT Safety(2018-03-31)
I installed this safety in a Springfield Mil-Spec that I am tinkering with. I bought it because its a Novak part and I've had good luck with Novak's stuff. I am impressed with the attention to detail. No rough edges or points, no tooling marks or seams and the finish is even and smooth. The thumb pad is very comfortable with a thumb over safety grip. And the best part is the detents at the "off" and "on" position are very positive. No extra movement at all. It "snicks" like an old Colt safety. Finding all these plusses together is often a hard thing to do. So far, the only drawback I can see is that I now have a bunch of 1911s that are in need of one of these.
Produktnr: 662000105 NOVAK AMBIDEXTROUS NXT SAFETY, BLUED Tillverkarens produktnummer: N1911TS-AMB-B Novak tar 1911-sÀkerheten ett steg lÀngre med strömlinjeformad stil och flera funktionsförbÀttringar. En omkonstruerad spÀrr möjliggör extremt positivt engagemang och hjÀlper till att hÄlla plungröret mot ramen för att förhindra att det lossnar. Paddeln pÄ höger sida pÄ den ambidextra modellen Àr försedd med nyckel och stiftad till axeln för att förhindra flex och eliminera behovet av att greppet hÄller den högra spaken pÄ plats. Det tillÄter ocksÄ en mycket smalare paddel som fungerar med alla grepp, inklusive LaserGrips. Helt "carry beveled" med alla vassa kanter borttagna för skyttens komfort och kontroll.
1849SEK21 849,00 kr
*
Levernastid ca. 14-21 dagar. 2 st. i centrallagret.
Funktioner:Finish: BlÄneradHand: AmbidextrousMake: 1911Modell: Government, Commander, OfficersStil: Thumb
Novak 1911 NXT Extended Thumb Safeties erbjuder en strömlinjeformad design med förbÀttrad funktionalitet och extremt positivt engagemang.
Den ambidextra modellen har en nyckel och stiftad paddel pÄ höger sida för att förhindra flex och eliminera behovet av grepp för att hÄlla spaken pÄ plats.
Alla vassa kanter Àr borttagna för skyttens komfort och kontroll, och produkten Àr tillgÀnglig i kolstÄl, blÄnerad, eller rostfritt stÄl.
Tillverkas i USA
USA: s exportklassificering: 0A501.x
Destination Control Statement: Dessa poster styrs av USA: s regering och godkÀnns endast för export till det land dÀr den slutliga destinationen anvÀnds av den slutliga mottagaren eller slutanvÀndaren som identifierats hÀr. De fÄr inte vidareförsÀljas, överföras eller pÄ annat sÀtt kasseras till nÄgot annat land eller nÄgon annan Àn den godkÀnda slutliga mottagaren eller slutanvÀndaren, antingen i sin ursprungliga form eller efter att ha monterats i andra föremÄl utan att först fÄ godkÀnnande frÄn den amerikanska regeringen eller som annars Àr tillÄten enligt amerikansk lag och förordningar.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Produktnr: 662000104 NOVAK NXT SAFETY, STAINLESS Tillverkarens produktnummer: N1911TS-SS Novak tar 1911-sÀkerheten ett steg lÀngre med strömlinjeformad stil och flera funktionsförbÀttringar. En omkonstruerad spÀrr möjliggör extremt positivt engagemang och hjÀlper till att hÄlla plungröret mot ramen för att förhindra att det lossnar. Paddeln pÄ höger sida pÄ den ambidextra modellen Àr försedd med nyckel och stiftad till axeln för att förhindra flex och eliminera behovet av att greppet hÄller den högra spaken pÄ plats. Det tillÄter ocksÄ en mycket smalare paddel som fungerar med alla grepp, inklusive LaserGrips. Helt "carry beveled" med alla vassa kanter borttagna för skyttens komfort och kontroll.
1199SEK21 199,00 kr
*
Levernastid ca. 14-21 dagar. 2 st. i centrallagret.
Funktioner:Finish: Rostfritt stÄlHand: HögerMake: 1911Modell: Government, Commander, OfficersStil: Thumb
Produktnr: 662000106 NOVAK AMBIDEXTROUS NXT SAFETY, STAINLESS Tillverkarens produktnummer: N1911TSAMBSS Novak tar 1911-sÀkerheten ett steg lÀngre med strömlinjeformad stil och flera funktionsförbÀttringar. En omkonstruerad spÀrr möjliggör extremt positivt engagemang och hjÀlper till att hÄlla plungröret mot ramen för att förhindra att det lossnar. Paddeln pÄ höger sida pÄ den ambidextra modellen Àr försedd med nyckel och stiftad till axeln för att förhindra flex och eliminera behovet av att greppet hÄller den högra spaken pÄ plats. Det tillÄter ocksÄ en mycket smalare paddel som fungerar med alla grepp, inklusive LaserGrips. Helt "carry beveled" med alla vassa kanter borttagna för skyttens komfort och kontroll.
1599SEK51 599,00 kr
*
Levernastid ca. 14-21 dagar. 5 st. i centrallagret.
Funktioner:Finish: Rostfritt stÄlHand: AmbidextrousMake: 1911Modell: Government, Commander, OfficersStil: Thumb
Produktnr: 662000103 NOVAK NXT SAFETY, BLUED Tillverkarens produktnummer: N1911TSBN1911TS-BLUE Novak tar 1911-sÀkerheten ett steg lÀngre med strömlinjeformad stil och flera funktionsförbÀttringar. En omkonstruerad spÀrr möjliggör extremt positivt engagemang och hjÀlper till att hÄlla plungröret mot ramen för att förhindra att det lossnar. Paddeln pÄ höger sida pÄ den ambidextra modellen Àr försedd med nyckel och stiftad till axeln för att förhindra flex och eliminera behovet av att greppet hÄller den högra spaken pÄ plats. Det tillÄter ocksÄ en mycket smalare paddel som fungerar med alla grepp, inklusive LaserGrips. Helt "carry beveled" med alla vassa kanter borttagna för skyttens komfort och kontroll.
949SEK0949,00 kr
*
Restorder. Skickas nÀr den finns i lager. Leveranstid ca 4-12 veckor frÄn centrallagret.
Funktioner:Finish: BlÄneradHand: HögerMake: 1911Modell: Government, Commander, OfficersStil: Thumb
Design Enhancements For Superior Performance; Standard & Ambidextrous Models
Novak takes the 1911 safety a step further with streamlined styling and several operating enhancements. A re-designed detent enables extremely positive engagement and helps hold the plunger tube against the frame to keep it from working loose. The right-hand paddle on the ambidextrous model is keyed and pinned to the shaft to prevent flex and eliminate the need for the grip to hold the right lever in place. It also permits a much slimmer paddle that works with any grip, including LaserGrips. Completely âcarry beveledâ with all sharp edges removed for shooter comfort and control.
SPECS: Carbon steel, blued, or stainless steel, natural finish. Fitting required for installation. Gunsmith installation recommended.
Novak tar 1911-sÀkerheten ett steg lÀngre med strömlinjeformad stil och flera funktionsförbÀttringar. En omkonstruerad spÀrr möjliggör extremt positivt engagemang och hjÀlper till att hÄlla plungröret mot ramen för att förhindra att det lossnar. Paddeln pÄ höger sida pÄ den ambidextra modellen Àr försedd med nyckel och stiftad till axeln för att förhindra flex och eliminera behovet av att greppet hÄller den högra spaken pÄ plats. Det tillÄter ocksÄ en mycket smalare paddel som fungerar med alla grepp, inklusive LaserGrips. Helt "carry beveled" med alla vassa kanter borttagna för skyttens komfort och kontroll.
SPECS: KolstÄl, blÄnerat, eller rostfritt stÄl, naturlig finish. Passning krÀvs för installation. Installation av en busskytt rekommenderas.
Antal betyg: 8
FrÄn brownells.com: 8
Medelbetyg: 3,4
Novak NXT ambi excellent(2015-04-27)
Excellent product however the description works with laser grips is not 100% accurate. Some grips have the laser module reduced but I found it necessary to trim the right side lever to clear the laser on my older CT laser grips.
It does not say in the product description, but you will need a 1/16" roll pin starter and a 1/16" roll pin punch to secure the right side lever. Only one roll pin ships with the package 1/16x 0.270, not a size listed in the roll pin section of the catalog. Order some spare roll pins.
The ambi safety functions just fine as a single side and I suggest that you fit and used the safety for a while before pinning the final assembly. I could have saved a lot of money if I'd bought the Novak safety before a less expensive ambi safety.
instrutions should be included.(2013-04-27)
just like a kid, i was so excited to get my package today. it looked even better than expected. i mean, man, great part. this was the most expensive one yet, and i would rate a 5 easily if some one had included a how to get the tiny little pin in the tiny little hole to fasten the right side! what a pain! finally had it launch so far off the table i dont think i will EVER find it. so one nice pistole in my collection is gonna be out of commishion till i find a replacement and a clue on how to get finished. i mean come on! could they make one end slightly smaller so we can get it started?
uncomfortable for lefties(2016-09-08)
If you are lefthanded and shoot with your thumb on the safety this is not the safety for you. It is very uncomfortable. My gunsmith fit it to my 1911 so I can not send it back.
matte not stainless(2012-11-01)
in the description it states stainless steel but it is powered coat a dull grey. did not fit kimber custom II
This extended safety is a winner.(2012-11-10)
This extended thumb safety fills the niche for tactical or competition shooting. It requires gunsmith fitting as the sear contact ledge is oversized to fit to your specific gun. The dimensions and specs are absolutely precise with the contact points and pin axis aligned perfectly. After fitting, there was no slack or bounce while gripping the pistol.
Some tips: You might need to lightly bevel the safety's lug corner radius at the channel - so it won't shave your frame cutout. You can blend the corners of the safety with your Dremel to match your frame and beavertail. The polished surfaces contrast nicely with the matte finish.
Ambidextrous safeties are okay for many shooters, but this single side safety fits my shooting grip with better ergonomics. It allows a lower bore axis and more solid shooting platform without that weak-side safety lever pressing into your metacarpo-phalangeal joint.
The precision of manufacture is impressive. This part is even better than the King's Safety of years past.
Bravo, Novak.
Why did I order two?? (2016-03-21)
That was a mistake. First, my "stainless" safety came with a powder coated dark gray paint on it which took an hour to sand off with #320 paper. The sear lug had enough meat on it for proper fitting so that was OK. The problem with this unit is the profile at the front edge just below the detent for the plunger. It is cut back too far allowing the tip of the plunger to extend out of the plunger tube too far. Comparing it to my safeties from Colt, Dan Wesson and EGW the difference is obvious. In time, the over-extended plunger will oval out the end of the plunger tube. Not a problem if you have spare plunger tubes and a staking tool. But why bother. I'll stick with the EGW.
Perfect(2012-10-25)
Switched out an ambi safety on my Springfield duty gun. I had also ordered an Ed Brown tactical safety which paled in comparison, both in finish and function. Paddle is a nice medium size. Design keeps the safety from rubbing the frame. Detent is is secure; I polished the plunger for smooth movement. Finish perfect for a parkerized pistol, would be dull on a blued one.
Novak NXT Safety(2018-03-31)
I installed this safety in a Springfield Mil-Spec that I am tinkering with. I bought it because its a Novak part and I've had good luck with Novak's stuff. I am impressed with the attention to detail. No rough edges or points, no tooling marks or seams and the finish is even and smooth. The thumb pad is very comfortable with a thumb over safety grip. And the best part is the detents at the "off" and "on" position are very positive. No extra movement at all. It "snicks" like an old Colt safety. Finding all these plusses together is often a hard thing to do. So far, the only drawback I can see is that I now have a bunch of 1911s that are in need of one of these.