Made from a one-piece, 17-4 stainless steel forging, beautifully finished to help you achieve the finest in accuracy. Matching stainless steel bushing supplied. Barrel and bushing are left slightly oversized at lockup areas to allow precise final fitting. Chamber requires finish reaming. Hardened to Rc 40.
SPECS: Machined 17-4 stainless steel, heat treated Rc 40. Fits 1911 Auto. All require finish chambering and gunsmith fitting. .45 ACP models are non-ramped and available in 31⁄2" (8.8cm) Officers ACP, 4.25" (10.7cm) Commander, and 5" (12.7cm) Govt./Gold Cup.
Mer...
Rostfritt stål - Matchkvalitetsbussning ingår
Tillverkad från ett enda stycke smide av 17-4 rostfritt stål, vackert avslutad för att hjälpa dig uppnå den finaste precisionen. Matchande rostfritt stål bussning medföljer. Pipa och bussning är lätt överdimensionerade vid låsningsområden för att möjliggöra exakt slutlig passform. Kammaren kräver slutlig reaming. Härdat till Rc 40.
SPECS: Bearbetad 17-4 rostfritt stål, värmebehandlad till Rc 40. Passar 1911 Auto. Alla kräver slutgiltig kammarring och vapensmedsanpassning. .45 ACP modeller är icke-rampade och finns i 31⁄2" (8.8cm) Officers ACP, 4.25" (10.7cm) Commander, och 5" (12.7cm) Govt./Gold Cup.
Antal betyg: 6
Från brownells.com: 6
Medelbetyg: 4,7
Great barrel(2013-10-27)
I bought this for a custom long slide build. Curiously, the barrel did not require any fitting of the locking lugs at all, just link pin lug and barrel hood fitting. Accuracy of the finished product has been excellent.
My only complaints are that Wilson failed to polish the underside of the chamber area, which they did do for the 5" 45 ACP barrel in my other 1911. Also, the caliber designation is painted on, not stamped. As a result, it has begun to rub off a little.
Be warned that you will have to ream the ID and turn down the OD of the included bushing.
I CAN SHOOT NOW!(2011-04-05)
I target shoot every weekend, now I can reliably put 5 out of 6 in the quarter size bulls eye at 7 yards. This a beautiful Barrel. My Gunsmith had to finish fit the chamber after all, and it cost me extra to have it installed. But with my accurizing job and this new Match Barrel, I can't miss!
The Best Investment I Ever Made!(2011-11-20)
I Own a Springfield Amory 5" 1911, it has always been a pretty accurate gun. But After My Gunsmith Installed my Wilson Combat Match Barrel/Bushing for me I've found the Bullets hit Exactly where I'm Aiming. The Gun is more Accurate than I am now. All I have to do now is Remember all the Basics and the Shot is there. Now I impress everyone at the Range More than Ever. If I could just do it in the Actual Matches I'd be Famous!
Exactly what I needed(2015-06-03)
Bought this barrel to use in a class I was taking on tuning up the 1911. While it did require fitting, I don't consider that a con. After all the measuring, filing and polishing was done I've got a very good shooting barrel that fits perfectly in my 1911. Will definitely order another should the need arise.
Outstanding Product(2011-07-19)
Workmanship and finish were perfect. More importantly, there was sufficient material on the top and bottom lugs, and the hood, to fit with 100 % lockup. The bushing is already fitted to the barrel, but needs to be fitted to the slide. This barrel will require extensive fitting, so don't purchase if you want a drop-in barrel.
Great Barrel(2011-11-23)
Not that an Officers Model needs a match grade barrel but I long ago Magna-Ported my Officers Model back in the mid 1980's and soon came to regret it with the excessive fouling and carbon buildup. Wilson was the first quality manufacturer to offer a 3.5" barrel so I bought one. Required fitting of hood, upper and lower lugs as expected and I fit it tight, I was impressed with the accuracy from a short barreled 45 especially with the ammo and powders available. I still carry this gun some 25 years later.
Produktnr: 965033345 WILSON COMBAT 1911 MATCH .45 ACP 3.5" BBL 1-16 TWIST STAINLESS STEEL Tillverkarens produktnummer: 33-O874218001049 Tillverkad från ett enda stycke smide av 17-4 rostfritt stål, vackert avslutad för att hjälpa dig uppnå den finaste precisionen. Matchande rostfritt stål bussning medföljer. Pipa och bussning är lätt överdimensionerade vid låsningsområden för att möjliggöra exakt slutlig passform. Kammaren kräver slutlig reaming. Härdat till Rc 40.
Tillstånd Krävs(Vid köp av högkapacitetsmagasin krävs licenskontroll. E-posta eller posta en kopia på din licens (båda sidor) och ID-handling.
Vid köp av licenspliktiga vapendelar krävs tillstånd - Handlartillstånd eller Inköpstillstånd (Handlartillstånd eller Inköpstillstånd från polisen måste postas till oss. Licenspliktiga vapendelar skickas inte förrän vi har erhållit tillståndet.))
Top takeaways
Tillverkad av ett enda stycke smide av 17-4 rostfritt stål, värmebehandlad till Rc 40 för hög precision.
Matchande rostfritt stål bussning medföljer, båda är lätt överdimensionerade för exakt passform.
Passar 1911 Auto i .45 ACP, med piplängd på 3.5" (Officers ACP), kräver slutgiltig kammarring och vapensmedsanpassning.
Tillverkas i USA
USA: s exportklassificering: 0A501.c
Destination Control Statement: Dessa poster styrs av USA: s regering och godkänns endast för export till det land där den slutliga destinationen används av den slutliga mottagaren eller slutanvändaren som identifierats här. De får inte vidareförsäljas, överföras eller på annat sätt kasseras till något annat land eller någon annan än den godkända slutliga mottagaren eller slutanvändaren, antingen i sin ursprungliga form eller efter att ha monterats i andra föremål utan att först få godkännande från den amerikanska regeringen eller som annars är tillåten enligt amerikansk lag och förordningar.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Produktnr: 965033545 WILSON COMBAT 1911 MATCH .45 ACP 5" BBL 1-16 TWIST STAINLESS STEEL Tillverkarens produktnummer: 33G874218001117 Tillverkad från ett enda stycke smide av 17-4 rostfritt stål, vackert avslutad för att hjälpa dig uppnå den finaste precisionen. Matchande rostfritt stål bussning medföljer. Pipa och bussning är lätt överdimensionerade vid låsningsområden för att möjliggöra exakt slutlig passform. Kammaren kräver slutlig reaming. Härdat till Rc 40.
3699SEK23 699,00 kr
*
Leveranstid ca. 14-21 dagar. 2 st. i centrallagret.
Funktioner:Barrel Length: 5''Finish: Rostfritt stålMake: 1911Modell: GovernmentPatron: 45 Auto (ACP)Pipvikt: .25 lbsStil: Match Grade
Produktnr: 965033445 WILSON COMBAT 1911 MATCH .45 ACP 4.25" BBL 1-16 TWIST STAINLESS STEEL Tillverkarens produktnummer: 33C874218001094 Tillverkad från ett enda stycke smide av 17-4 rostfritt stål, vackert avslutad för att hjälpa dig uppnå den finaste precisionen. Matchande rostfritt stål bussning medföljer. Pipa och bussning är lätt överdimensionerade vid låsningsområden för att möjliggöra exakt slutlig passform. Kammaren kräver slutlig reaming. Härdat till Rc 40.
Made from a one-piece, 17-4 stainless steel forging, beautifully finished to help you achieve the finest in accuracy. Matching stainless steel bushing supplied. Barrel and bushing are left slightly oversized at lockup areas to allow precise final fitting. Chamber requires finish reaming. Hardened to Rc 40.
SPECS: Machined 17-4 stainless steel, heat treated Rc 40. Fits 1911 Auto. All require finish chambering and gunsmith fitting. .45 ACP models are non-ramped and available in 31⁄2" (8.8cm) Officers ACP, 4.25" (10.7cm) Commander, and 5" (12.7cm) Govt./Gold Cup.
Mer...
Rostfritt stål - Matchkvalitetsbussning ingår
Tillverkad från ett enda stycke smide av 17-4 rostfritt stål, vackert avslutad för att hjälpa dig uppnå den finaste precisionen. Matchande rostfritt stål bussning medföljer. Pipa och bussning är lätt överdimensionerade vid låsningsområden för att möjliggöra exakt slutlig passform. Kammaren kräver slutlig reaming. Härdat till Rc 40.
SPECS: Bearbetad 17-4 rostfritt stål, värmebehandlad till Rc 40. Passar 1911 Auto. Alla kräver slutgiltig kammarring och vapensmedsanpassning. .45 ACP modeller är icke-rampade och finns i 31⁄2" (8.8cm) Officers ACP, 4.25" (10.7cm) Commander, och 5" (12.7cm) Govt./Gold Cup.
Antal betyg: 6
Från brownells.com: 6
Medelbetyg: 4,7
Great barrel(2013-10-27)
I bought this for a custom long slide build. Curiously, the barrel did not require any fitting of the locking lugs at all, just link pin lug and barrel hood fitting. Accuracy of the finished product has been excellent.
My only complaints are that Wilson failed to polish the underside of the chamber area, which they did do for the 5" 45 ACP barrel in my other 1911. Also, the caliber designation is painted on, not stamped. As a result, it has begun to rub off a little.
Be warned that you will have to ream the ID and turn down the OD of the included bushing.
I CAN SHOOT NOW!(2011-04-05)
I target shoot every weekend, now I can reliably put 5 out of 6 in the quarter size bulls eye at 7 yards. This a beautiful Barrel. My Gunsmith had to finish fit the chamber after all, and it cost me extra to have it installed. But with my accurizing job and this new Match Barrel, I can't miss!
The Best Investment I Ever Made!(2011-11-20)
I Own a Springfield Amory 5" 1911, it has always been a pretty accurate gun. But After My Gunsmith Installed my Wilson Combat Match Barrel/Bushing for me I've found the Bullets hit Exactly where I'm Aiming. The Gun is more Accurate than I am now. All I have to do now is Remember all the Basics and the Shot is there. Now I impress everyone at the Range More than Ever. If I could just do it in the Actual Matches I'd be Famous!
Exactly what I needed(2015-06-03)
Bought this barrel to use in a class I was taking on tuning up the 1911. While it did require fitting, I don't consider that a con. After all the measuring, filing and polishing was done I've got a very good shooting barrel that fits perfectly in my 1911. Will definitely order another should the need arise.
Outstanding Product(2011-07-19)
Workmanship and finish were perfect. More importantly, there was sufficient material on the top and bottom lugs, and the hood, to fit with 100 % lockup. The bushing is already fitted to the barrel, but needs to be fitted to the slide. This barrel will require extensive fitting, so don't purchase if you want a drop-in barrel.
Great Barrel(2011-11-23)
Not that an Officers Model needs a match grade barrel but I long ago Magna-Ported my Officers Model back in the mid 1980's and soon came to regret it with the excessive fouling and carbon buildup. Wilson was the first quality manufacturer to offer a 3.5" barrel so I bought one. Required fitting of hood, upper and lower lugs as expected and I fit it tight, I was impressed with the accuracy from a short barreled 45 especially with the ammo and powders available. I still carry this gun some 25 years later.