Designed For Custom Fitting To Provide A Smooth, No-Slop Pull
The same high-quality match-grade triggers Nighthawk fits to all its custom pistols. Choose from solid or skeletonized shoe. All models have crisp serrations on the face for positive, no-slip finger contact, but no sharp edges to abrade the finger pad. Overtravel adjustment screw and hex wrench also included. Solid trigger shoe comes in Short and Medium lengths. Custom model has skeletonized shoe and an extra-wide trigger bow for extra strength.
Designad för anpassad montering för en mjuk, spel-fri dragning
Samma högkvalitativa match-grade triggers som Nighthawk monterar på alla sina anpassade pistoler. Välj mellan solid eller skeletterad sko. Alla modeller har skarpa räfflor på framsidan för säker, halkfri fingerkontakt, men inga vassa kanter som kan skava på fingertoppen. Skruv för överresjustering och insexnyckel ingår också. Solid triggersko finns i korta och medellånga längder. Custom-modellen har en skeletterad sko och en extra bred triggerbygel för extra styrka.
Antal betyg: 11
Från brownells.com: 11
Medelbetyg: 4,8
Stock look, Premium Quality.(2011-02-17)
This has been installed on a Springfield Armory 1911 A1 pattern frame. The bow is a perfect fit in my frame with no wobble or slop. The shoe needed a little stoning but that is to be expected, the shoe is the perfect width as there is no wobble or slop there either. The shoe is crimped to the bow rather than pinned and it is a solid unit. I think finding a better trigger than this for the money would be a difficult task.
Great upgrade(2014-01-22)
Used this as part of an upgrade to my Springfield 1911 Mil Spec. Had to slightly file the shoe to make it fit but that's a plus since I could perfectly fit it to my frame and eliminate all slop. The bow fit perfectly in the frame and pulls as smooth as silk. With the set screw in the trigger I was able to eliminate overtravel as well. Fantastic trigger.
Worth the money!(2009-11-09)
Excellent trigger for the money! Works perfect, looks great! Easy to seat your trigger finger into.
Good product(2010-03-14)
Excellent fit in my Combat Comander. Dropped in, not loose and no binding.
Very Nice for the Money(2010-10-25)
I used this trigger in a SS Essex frame Government Model that I built up from scratch. After the frame's trigger channels were coated with Brownell's Gunkote and lapped, trigger feels as if it is on ball bearings. Bow sides are smooth and burr free inside and out; and have no noticeable contact with magazine (trigger pull is same weight and feel with or without mag). Bow length is a little bit long in my frame (could very well be the iffy frame). Works very well once everything (grip safety, sear, thumb safety, hammer, disconnector) was fit together.
Excellent on a SIG GSR compact(2011-04-20)
My gun smith put this in my sig 1911 compact carry and he seemed surprised that no fitting was required. I noticed that it fit snugger than the original with no vertical or horizontal movement
WOW! AWESOME!!!(2011-07-14)
The fitting was perfect on my Colt Commander after squeezing the bow a tiny bit. Now the trigger is extremely smooth, precise, clean, crisp, light, and the annoying rattle and the wobble is gone. This [$]part pimped my Colt Commander to look like a $2500 gun. Buy it, it is worth every penny and you won't regret it.
Great trigger(2013-01-18)
Installed this in my Springfield Mil-Spec. Had to do minor fitting to get it not to stick. Hardly any play vertically or horizontally.
Easy to fit, looks great(2010-04-27)
I put this trigger in my stainless Springfield Mil Spec as part of a "WWI Look" project. It required a small amount of fitting, maybe 20 light file strokes apiece on the top and bottom of the shoe. I think it's a better fit than the factory trigger.
Sweet trigger!!(2011-05-25)
i'm not a gunsmith and this was my first 1911 project that I did the fitting of parts. took me about an hour to figure out what was wrong and how to fix it. its not a drop in for sure on my springfield champion with ed brown beaver tail and safety. trigger bow was too long and had to be filed and polished. grip safety wouldn't work and was blocking the trigger so it would get stuck. had to shorten and polish it also. it looks great and took a lot of play out of the trigger. didn't really effect the trigger job i already had done. can't get over how good it looks. serations on face are done perfect, not too sharp. bow came mirror polished
Quality Item(2011-06-12)
I put this trigger on my SA Mil Spec. The bow was just the right length and I ended up with very little vertical play. Very happy.
Produktnr: 100003270 NIGHTHAWK CUSTOM CUSTOM TRIGGER Tillverkarens produktnummer: SP0463080683000641 Samma högkvalitativa match-grade triggers som Nighthawk monterar på alla sina anpassade pistoler. Välj mellan solid eller skeletterad sko. Alla modeller har skarpa räfflor på framsidan för säker, halkfri fingerkontakt, men inga vassa kanter som kan skava på fingertoppen. Skruv för överresjustering och insexnyckel ingår också. Solid triggersko finns i korta och medellånga längder. Custom-modellen har en skeletterad sko och en extra bred triggerbygel för extra styrka.
599SEK2599,00 kr
*
Levernastid ca. 14-21 dagar. 2 st. i centrallagret.
Tillverkas i USA
USA: s exportklassificering: 0A501.c
Destination Control Statement: Dessa poster styrs av USA: s regering och godkänns endast för export till det land där den slutliga destinationen används av den slutliga mottagaren eller slutanvändaren som identifierats här. De får inte vidareförsäljas, överföras eller på annat sätt kasseras till något annat land eller någon annan än den godkända slutliga mottagaren eller slutanvändaren, antingen i sin ursprungliga form eller efter att ha monterats i andra föremål utan att först få godkännande från den amerikanska regeringen eller som annars är tillåten enligt amerikansk lag och förordningar.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Produktnr: 100003273 NIGHTHAWK CUSTOM SOLID TRIGGER, SHORT Tillverkarens produktnummer: SP0464080683000658 Samma högkvalitativa match-grade triggers som Nighthawk monterar på alla sina anpassade pistoler. Välj mellan solid eller skeletterad sko. Alla modeller har skarpa räfflor på framsidan för säker, halkfri fingerkontakt, men inga vassa kanter som kan skava på fingertoppen. Skruv för överresjustering och insexnyckel ingår också. Solid triggersko finns i korta och medellånga längder. Custom-modellen har en skeletterad sko och en extra bred triggerbygel för extra styrka.
599SEK4599,00 kr
*
Levernastid ca. 14-21 dagar. 4 st. i centrallagret.
Funktioner:Finish: UnfinishedMake: 1911Modell: Government, Commander, OfficersStil: Curved, Solid, Short
Produktnr: 100003272 NIGHTHAWK CUSTOM SOLID TRIGGER, MEDIUM Tillverkarens produktnummer: SP0462080683001662 Samma högkvalitativa match-grade triggers som Nighthawk monterar på alla sina anpassade pistoler. Välj mellan solid eller skeletterad sko. Alla modeller har skarpa räfflor på framsidan för säker, halkfri fingerkontakt, men inga vassa kanter som kan skava på fingertoppen. Skruv för överresjustering och insexnyckel ingår också. Solid triggersko finns i korta och medellånga längder. Custom-modellen har en skeletterad sko och en extra bred triggerbygel för extra styrka.
599SEK0599,00 kr
*
Restorder. Skickas när den finns i lager. Leveranstid ca 4-12 veckor från centrallagret.
Funktioner:Finish: UnfinishedMake: 1911Modell: Government, Commander, OfficersStil: Competition, Curved, Solid, Medium
Designed For Custom Fitting To Provide A Smooth, No-Slop Pull
The same high-quality match-grade triggers Nighthawk fits to all its custom pistols. Choose from solid or skeletonized shoe. All models have crisp serrations on the face for positive, no-slip finger contact, but no sharp edges to abrade the finger pad. Overtravel adjustment screw and hex wrench also included. Solid trigger shoe comes in Short and Medium lengths. Custom model has skeletonized shoe and an extra-wide trigger bow for extra strength.
Designad för anpassad montering för en mjuk, spel-fri dragning
Samma högkvalitativa match-grade triggers som Nighthawk monterar på alla sina anpassade pistoler. Välj mellan solid eller skeletterad sko. Alla modeller har skarpa räfflor på framsidan för säker, halkfri fingerkontakt, men inga vassa kanter som kan skava på fingertoppen. Skruv för överresjustering och insexnyckel ingår också. Solid triggersko finns i korta och medellånga längder. Custom-modellen har en skeletterad sko och en extra bred triggerbygel för extra styrka.
Antal betyg: 11
Från brownells.com: 11
Medelbetyg: 4,8
Stock look, Premium Quality.(2011-02-17)
This has been installed on a Springfield Armory 1911 A1 pattern frame. The bow is a perfect fit in my frame with no wobble or slop. The shoe needed a little stoning but that is to be expected, the shoe is the perfect width as there is no wobble or slop there either. The shoe is crimped to the bow rather than pinned and it is a solid unit. I think finding a better trigger than this for the money would be a difficult task.
Great upgrade(2014-01-22)
Used this as part of an upgrade to my Springfield 1911 Mil Spec. Had to slightly file the shoe to make it fit but that's a plus since I could perfectly fit it to my frame and eliminate all slop. The bow fit perfectly in the frame and pulls as smooth as silk. With the set screw in the trigger I was able to eliminate overtravel as well. Fantastic trigger.
Worth the money!(2009-11-09)
Excellent trigger for the money! Works perfect, looks great! Easy to seat your trigger finger into.
Good product(2010-03-14)
Excellent fit in my Combat Comander. Dropped in, not loose and no binding.
Very Nice for the Money(2010-10-25)
I used this trigger in a SS Essex frame Government Model that I built up from scratch. After the frame's trigger channels were coated with Brownell's Gunkote and lapped, trigger feels as if it is on ball bearings. Bow sides are smooth and burr free inside and out; and have no noticeable contact with magazine (trigger pull is same weight and feel with or without mag). Bow length is a little bit long in my frame (could very well be the iffy frame). Works very well once everything (grip safety, sear, thumb safety, hammer, disconnector) was fit together.
Excellent on a SIG GSR compact(2011-04-20)
My gun smith put this in my sig 1911 compact carry and he seemed surprised that no fitting was required. I noticed that it fit snugger than the original with no vertical or horizontal movement
WOW! AWESOME!!!(2011-07-14)
The fitting was perfect on my Colt Commander after squeezing the bow a tiny bit. Now the trigger is extremely smooth, precise, clean, crisp, light, and the annoying rattle and the wobble is gone. This [$]part pimped my Colt Commander to look like a $2500 gun. Buy it, it is worth every penny and you won't regret it.
Great trigger(2013-01-18)
Installed this in my Springfield Mil-Spec. Had to do minor fitting to get it not to stick. Hardly any play vertically or horizontally.
Easy to fit, looks great(2010-04-27)
I put this trigger in my stainless Springfield Mil Spec as part of a "WWI Look" project. It required a small amount of fitting, maybe 20 light file strokes apiece on the top and bottom of the shoe. I think it's a better fit than the factory trigger.
Sweet trigger!!(2011-05-25)
i'm not a gunsmith and this was my first 1911 project that I did the fitting of parts. took me about an hour to figure out what was wrong and how to fix it. its not a drop in for sure on my springfield champion with ed brown beaver tail and safety. trigger bow was too long and had to be filed and polished. grip safety wouldn't work and was blocking the trigger so it would get stuck. had to shorten and polish it also. it looks great and took a lot of play out of the trigger. didn't really effect the trigger job i already had done. can't get over how good it looks. serations on face are done perfect, not too sharp. bow came mirror polished
Quality Item(2011-06-12)
I put this trigger on my SA Mil Spec. The bow was just the right length and I ended up with very little vertical play. Very happy.