Direct replacement hammers with custom features for all types of shooters. Quality castings, CNC finish machined and hardened for durability. Wide Spur (WS) - Bullseye hammer with an extra-wide, checkered spur for easier cocking.
SPECS: Steel, blued, matte finish.
Mer...
Kvalitetsersättningshammare till överkomliga priser
Direktersättningshammare med anpassade funktioner för alla typer av skyttar. Kvalitetsgjutningar, CNC-finishbearbetade och härdade för hållbarhet. Wide Spur (WS) - Bullseyehammare med en extra bred, räfflad sporre för enklare spänning.
SPECS: Stål, blånerat, matt finish.
Mer...
Kundernas betyg påJOHN MASEN BLUE WS HAMMER
Antal betyg: 9
Från brownells.com: 9
Medelbetyg: 2,3
Worth it to a machinist.(2014-03-08)
I polished out a Para-Ordnance P-12 and wanted the traditional, "hammer-spur" look on the weapon. This casting was an easily machineable piece [I cut off the wide spur plus I wanted to give it the under cut hammer modification]. After machining, lapping the sear contact area and giving it a high polish, it dropped right in making the gun a handsome custom piece. The specs were accurate and it range fires fine. The only draw back is polishing out more casting marks than anticipated but I expected that with the price. A great buy for machinist type gunners.
John Masen Hammer:(2010-02-04)
A cast part. Rough surface, pitting, mold irregularities, uneven seams, deformed hammer hooks that could not be saved. Cost more to return than I paid for it. You get what you pay for. Spend the extra $$$$ and get a quality forged hammer.
ss hammer(2012-05-01)
fits well,looks good ,good price,works well
Pretty good, actually(2017-07-09)
This hammer came, and honestly, I expected an unusable part. This one is of good quality, and very usable. Hammer hooks are good, even the hammer strut hole was slightly bigger making hammer-swapping a little easier, the pin goes in nice and easy. Only gripe I have is the color of the steel is matte, and very dark. Goes OK with a stainless 1911. If you have a mil spec grip safety, you will have to modify, or install a beavertail grip safety.
Smith work required not a drop in part(2009-12-23)
Least expensive on the site. Manufacturer said it was a CNC part. Works great but required a lot of attention to the engaging surfaces. Very rough!
John Masen Hammer(2010-02-04)
Cast part with wide seams, rough finish, hammer hooks not square. Cost more to send it back than I paid for it. Now collecting dust on my bench.
Requires Fitting(2014-09-25)
This hammer works great as a government replacement hammer. The hooks are shaped in the arc of a circle, which looks really strange at first. However, when the hook height is dressed down to .020" and then the hooks faces dressed square, you end up with a nice hammer that works well. I suggest tuning the hammer using the 080-823-000WB Marvel Sear & Hammer Jig. If you want to learn how to do 1911 trigger jobs, this is a great practice hammer.
John Masen Cast Hammers:(2010-02-04)
Very rough casting, uneven seams, core-shift, deformed hammer hooks. Good hammer for a non-firing replica.
Did not function(2011-01-03)
Strut pin hole drilled .030" off so will not allow hammer to rotate when fully cocked.
Produktnr: 555103012 JOHN MASEN BLUE WS HAMMER Tillverkarens produktnummer: 4555B Direktersättningshammare med anpassade funktioner för alla typer av skyttar. Kvalitetsgjutningar, CNC-finishbearbetade och härdade för hållbarhet. Wide Spur (WS) - Bullseyehammare med en extra bred, räfflad sporre för enklare spänning.
Tillverkas i USA
USA: s exportklassificering: 0A501.c
Destination Control Statement: Dessa poster styrs av USA: s regering och godkänns endast för export till det land där den slutliga destinationen används av den slutliga mottagaren eller slutanvändaren som identifierats här. De får inte vidareförsäljas, överföras eller på annat sätt kasseras till något annat land eller någon annan än den godkända slutliga mottagaren eller slutanvändaren, antingen i sin ursprungliga form eller efter att ha monterats i andra föremål utan att först få godkännande från den amerikanska regeringen eller som annars är tillåten enligt amerikansk lag och förordningar.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Upptäck 1911 HAMMER från JOHN MASEN! ✨ En hållbar och anpassad hane för alla skyttar med en extra bred sporre för bättre grepp.
Direct replacement hammers with custom features for all types of shooters. Quality castings, CNC finish machined and hardened for durability. Wide Spur (WS) - Bullseye hammer with an extra-wide, checkered spur for easier cocking.
SPECS: Steel, blued, matte finish.
Mer...
Kvalitetsersättningshammare till överkomliga priser
Direktersättningshammare med anpassade funktioner för alla typer av skyttar. Kvalitetsgjutningar, CNC-finishbearbetade och härdade för hållbarhet. Wide Spur (WS) - Bullseyehammare med en extra bred, räfflad sporre för enklare spänning.
SPECS: Stål, blånerat, matt finish.
Mer...
Kundernas betyg påJOHN MASEN BLUE WS HAMMER
Antal betyg: 9
Från brownells.com: 9
Medelbetyg: 2,3
Worth it to a machinist.(2014-03-08)
I polished out a Para-Ordnance P-12 and wanted the traditional, "hammer-spur" look on the weapon. This casting was an easily machineable piece [I cut off the wide spur plus I wanted to give it the under cut hammer modification]. After machining, lapping the sear contact area and giving it a high polish, it dropped right in making the gun a handsome custom piece. The specs were accurate and it range fires fine. The only draw back is polishing out more casting marks than anticipated but I expected that with the price. A great buy for machinist type gunners.
John Masen Hammer:(2010-02-04)
A cast part. Rough surface, pitting, mold irregularities, uneven seams, deformed hammer hooks that could not be saved. Cost more to return than I paid for it. You get what you pay for. Spend the extra $$$$ and get a quality forged hammer.
ss hammer(2012-05-01)
fits well,looks good ,good price,works well
Pretty good, actually(2017-07-09)
This hammer came, and honestly, I expected an unusable part. This one is of good quality, and very usable. Hammer hooks are good, even the hammer strut hole was slightly bigger making hammer-swapping a little easier, the pin goes in nice and easy. Only gripe I have is the color of the steel is matte, and very dark. Goes OK with a stainless 1911. If you have a mil spec grip safety, you will have to modify, or install a beavertail grip safety.
Smith work required not a drop in part(2009-12-23)
Least expensive on the site. Manufacturer said it was a CNC part. Works great but required a lot of attention to the engaging surfaces. Very rough!
John Masen Hammer(2010-02-04)
Cast part with wide seams, rough finish, hammer hooks not square. Cost more to send it back than I paid for it. Now collecting dust on my bench.
Requires Fitting(2014-09-25)
This hammer works great as a government replacement hammer. The hooks are shaped in the arc of a circle, which looks really strange at first. However, when the hook height is dressed down to .020" and then the hooks faces dressed square, you end up with a nice hammer that works well. I suggest tuning the hammer using the 080-823-000WB Marvel Sear & Hammer Jig. If you want to learn how to do 1911 trigger jobs, this is a great practice hammer.
John Masen Cast Hammers:(2010-02-04)
Very rough casting, uneven seams, core-shift, deformed hammer hooks. Good hammer for a non-firing replica.
Did not function(2011-01-03)
Strut pin hole drilled .030" off so will not allow hammer to rotate when fully cocked.
Hjälp och kontakt
(0) 
Nyhetsbrev
Klassisk visning
Mobilvisning