Varukorgen är tom.

Varukorg

Hjälp och kontakt

Fri frakt på beställningar över 2.999 kr

100 dagars returrätt

Nyhetsbrev

REA

Över 300 000 kunder - vi säger tack!

4,93/5 "Mycket bra" (1400+ recensioner)

40 000+ produkter inom jakt och skytte

BROWNELLS
1" NYLON/BRASS HAMMER

050806023659 818600100

Our Most Popular Gunsmith No-Mar Hammer

This combo is so perfect for so many jobs around the gun shop and on the range, it's impossible to list 'em all. Nylon head resists breaking, won't mar metal. Solid brass is the Basic for gunsmith use with punches and more.

SPECS: 1" (2.5cm) diameter faces. 10½" (26.67cm) hickory handle. Weighs approximately 6 oz. (170.1g).

Mer...

Vår Mest Populära Vapensmeds No-Mar Hammare

Denna kombination är så perfekt för så många jobb runt vapenbutiken och på skjutbanan att det är omöjligt att lista alla. Nylonhuvudet är motståndskraftigt mot att gå sönder och kommer inte att skada metallen. Massiv mässing är grunden för vapensmedsbruk med dornar och mer.

SPECS: 1" (2.5cm) diameter på ansiktena. 10½" (26.67cm) hickoryhandtag. Viktar ungefär 6 oz. (170.1g).

Mer...

Kundernas betyg påBROWNELLS 1" NYLON/BRASS HAMMER

Antal betyg: 10
Från brownells.com: 10
Medelbetyg: 4,6

Works great (2009-09-10)

The little hammer just sits in a rack on my peg board but when needed I have instant access to either a nylon or brass head depending upon the need.

Excellent tool (2009-10-11)

I keep one of these hammers on every bench in the shop. The nylon is perfect when you cannot mar a finish, and the brass works great for when you need a solid hit, but can't deform the part. I have had my original hammer for almost two years, and it is still going strong, all I have done is touched up the nylon side with the disk sander to clean up the edge and keep it looking sharp.

I would buy this product again (2009-10-14)

Very well made,perfect size for most jobs on guns,You get the best of both worlds brass and nylon..

Quality hammer (2011-05-02)

Great balance, perfect weight and size for gun smithing. Its the hammer I reach for the most.

Best Hammer (2011-10-05)

What great purchase. I found this hammer to be perfect for most jobs. Extremely durable and strong.

Great hammer! (2013-01-21)

This hammer is perfect. Well made, the perfect size for gunsmithing, and the head is firmly attached to the handle. This is definitely a keeper.

Good Paperweight (2013-08-24)

First the good side. Its the right size and weight. Now the bad side. The heads do NOT screw flush with the base. The brass head leaves a 1/8" gap with the base. Same with the Nylon head. Also the Nylon head has a Big "O" mark the size of a dime marked on. I am sending this one back to Brownells because as it is it can only be used a paperweight.

Good gunsmithing hammer (2013-12-05)

As a former auto mechanic, I have hammers. I have a lot of hammers. This one is well-suited for working on guns though. The weight is right for the tap-tap that you need every now and then for a sticky pin or dovetail sight. With a nylon side and a brass side, it provides two options for non-marking, smacking power. Put your 32-oz smith hammer down and use this one on your handgun or rifle.

Very nice hammer. Glad I got this tool. (2014-02-05)

It's a very nice tool. I had a small brass hammer and wanted one a little bigger with a plastic head. It fits the bill.

Brownells is tops for gunsmithing tools.

brass and poly...perfect hammer heads (2015-02-09)

I thought I was going to buy an 8oz. ball peen hammer, but found that this hammer is much better. Bronze for non-marring the steel parts of the job (in case you miss a hit), and even doens't mar or wear the head of pin punches as brass is much inferior/softer than steel. The polymer head is good for light smacks for job fitting and ensuring a good mate of parts.

Best of all, the hammer heads are replaceable and could be bought again from Brownells.

Läs 10 fler betyg på brownells.com

549 549 1 SEK

Produktnr: 818600100
BROWNELLS 1" NYLON/BRASS HAMMER
Tillverkarens produktnummer: 156001 050806023659 Denna kombination är så perfekt för så många jobb runt vapenbutiken och på skjutbanan att det är omöjligt att lista alla. Nylonhuvudet är motståndskraftigt mot att gå sönder och kommer inte att skada metallen. Massiv mässing är grunden för vapensmedsbruk med dornar och mer.

549 SEK 82 549,00 kr *

Levernastid ca. 14-21 dagar.
Mer än 10 st. i centrallagret.

Funktioner: Stil: Brass, Nylon Storlek: 1 Vikt: 6.0 oz

Lägg till i inköpslista

Fråga om produkt

Information

Lägg till i inköpslista

Fråga om produkt

Top takeaways

Kombinationsverktyg med både nylon- och mässingshuvud, perfekt för många jobb runt vapenbutiken och på skjutbanan.
Nylonhuvudet är hållbart och skadar inte metallen, medan mässingshuvudet är idealiskt för vapensmedsbruk.
Specifikationer: 1" diameter på ansiktena, 10½" hickoryhandtag, viktar ungefär 6 oz.

Produktinformation

Stil: Brass,Nylon Storlek: 1 Vikt: 6.0 oz Leveransvikt: 0,204kg Leveranshöjd: 20mm Leveransbredd: 69mm Leveranslängd: 259mm UPC : 050806023659

Produkt detaljer

Tillverkas i USA

Ansvarig ekonomisk aktör enligt EU-förordningen

Brownells Sverige AB
Box 99
793 22 Leksand
Sverige
info@brownells.se

Upptäck BROWNELLS 1" Nylon/Brass Hammer – perfekt för vapenbutiken och skjutbanan! ✨ Hållbart och skonsamt mot metallen.

Our Most Popular Gunsmith No-Mar Hammer

SPECS: 1" (2.5cm) diameter faces. 10½" (26.67cm) hickory handle. Weighs approximately 6 oz. (170.1g).

Mer...

Vår Mest Populära Vapensmeds No-Mar Hammare

SPECS: 1" (2.5cm) diameter på ansiktena. 10½" (26.67cm) hickoryhandtag. Viktar ungefär 6 oz. (170.1g).

Mer...

Kundernas betyg påBROWNELLS 1" NYLON/BRASS HAMMER

Antal betyg: 10
Från brownells.com: 10
Medelbetyg: 4,6

Works great (2009-09-10)

The little hammer just sits in a rack on my peg board but when needed I have instant access to either a nylon or brass head depending upon the need.

Excellent tool (2009-10-11)

I would buy this product again (2009-10-14)

Very well made,perfect size for most jobs on guns,You get the best of both worlds brass and nylon..

Quality hammer (2011-05-02)

Great balance, perfect weight and size for gun smithing. Its the hammer I reach for the most.

Best Hammer (2011-10-05)

What great purchase. I found this hammer to be perfect for most jobs. Extremely durable and strong.

Great hammer! (2013-01-21)

This hammer is perfect. Well made, the perfect size for gunsmithing, and the head is firmly attached to the handle. This is definitely a keeper.

Good Paperweight (2013-08-24)

Good gunsmithing hammer (2013-12-05)

Very nice hammer. Glad I got this tool. (2014-02-05)

It's a very nice tool. I had a small brass hammer and wanted one a little bigger with a plastic head. It fits the bill.

Brownells is tops for gunsmithing tools.

brass and poly...perfect hammer heads (2015-02-09)

Läs 10 fler betyg på brownells.com