Antal betyg: 9
Från brownells.com: 9
Medelbetyg: 4
Perfect fit on Old model 3 screw XR3-RED(2010-09-02)
I picked up a mint SS Convertible three screw with broken grips, and searched all over online for a definitive answer as to "what" would fit properly on my gun. Ruger wasn't able to offer much help. I tried a set of new model grips, the black hard rubber ones, on at the gun shop...they fit, but not perfectly. I just wanted to be able to shoot my gun! These look beautiful, fit perfectly, and came with new ferrules installed and a new screw. It was a 30 second job to make my gun look great! Highly recommended if you're looking to keep Ruger grips on your classic revolver! Thanks Brownells!
Does NOT fit new model Blackhawk(2011-07-27)
Does not fit New model Ruger Blackhawk with factory XR3 grips frame The indexing pins do not line up and the grips are too large at the top.
Great Fit(2011-12-16)
I just bought a set of these for my New Model Blackhalk Convertable .357/9mm with lock. I was skeptical that they would fit as read on other posts on the internet, but when they arived they fit great. A little tight to align on the internal grip pins, but they don't move. They look good and enhance the revolver over the factory black grips. Thanks Brownells!
Look and fit grate on my N.M.B.H 357(2014-05-07)
BOUGHT A SET FOR MY NEW MODEL BLACK HAWK 357 XRN 3RED PINS LINED RIGHT UP!!!! PUT THE SCREW IN TOOK NOTIME TO PUT THEM ON. LOOK & FIT GRATE.CAN'T SAY ANYTHING THAT'S NOT SO GRATE ABOUT IT SO TIME TO SHOOT!!! GOOD BY & GOOD BUY
Not bad for thirty bucks...(2014-11-13)
Bought two pairs: one for a Blackhawk and one for a Single Six. Both pairs required minor fitting. The grips look great and are much better than the cheesy hard plastic "cheese grater" grips that come from the factory and fill the hand well.
Nice grips(2015-02-05)
Fit my 41 NM Blackhawk with lock like a glove. Much nicer than the factory plastic.
Beautiful BUT Thick and Slippery(2015-03-21)
This is a GORGEOUS replacement to the black stock grip that comes with the Ruger Single-Six BUT:
1) The grip is THICK, while the stock grip is nice and thin (nice and thin, that is - for small hands like mine). / I had to use a coarse wood file to file down the grips so that they would work with my relatively small hands.
2) The grip is SLIPPERY/ SMOOTH - which I do not like. / But, I fixed this problem with the already mentioned filing. After filing, I simply applied some oil to the filed surfaces, and now the grips are neither too thick, nor are they too slippery.
NOW the grips are BOTH GORGEOUS and highly FUNCTIONAL.
Looks good, but (2015-06-26)
Grip looks great, but modifications had to be made in order to fit. Sanding to top of grip and widing of the grip anchor holes had to be made.
Fits my .357 New Model B.H.(2016-02-17)
Got these grips for my New Model Blackhawk chambered for .357 with a conversion 9mm Luger cylinder, they fit tight and look beautiful. Feels good in the hand and yes they come with a screw so you don't have to buy a screw for them. I'm very happy with them overall no complaints here.
Produktnr: 780012073 RUGER GRIP PANELS, LAMINATED ROSEWOOD Tillverkarens produktnummer: 70046736676700462 PASSAR: New Model Blackhawk®; New Model Single-Six®; Old Army™, .45; Vaquero®
Tillverkas i USA
USA: s exportklassificering: 0A501.y.1
Destination Control Statement: Dessa poster styrs av USA: s regering och godkänns endast för export till det land där den slutliga destinationen används av den slutliga mottagaren eller slutanvändaren som identifierats här. De får inte vidareförsäljas, överföras eller på annat sätt kasseras till något annat land eller någon annan än den godkända slutliga mottagaren eller slutanvändaren, antingen i sin ursprungliga form eller efter att ha monterats i andra föremål utan att först få godkännande från den amerikanska regeringen eller som annars är tillåten enligt amerikansk lag och förordningar.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Upptäck våra GRIP PANELS i laminerad rosewood för Ruger! 🌳 Perfekta för Blackhawk och Vaquero, med en slät yta för bästa grepp.
Antal betyg: 9
Från brownells.com: 9
Medelbetyg: 4
Perfect fit on Old model 3 screw XR3-RED(2010-09-02)
I picked up a mint SS Convertible three screw with broken grips, and searched all over online for a definitive answer as to "what" would fit properly on my gun. Ruger wasn't able to offer much help. I tried a set of new model grips, the black hard rubber ones, on at the gun shop...they fit, but not perfectly. I just wanted to be able to shoot my gun! These look beautiful, fit perfectly, and came with new ferrules installed and a new screw. It was a 30 second job to make my gun look great! Highly recommended if you're looking to keep Ruger grips on your classic revolver! Thanks Brownells!
Does NOT fit new model Blackhawk(2011-07-27)
Does not fit New model Ruger Blackhawk with factory XR3 grips frame The indexing pins do not line up and the grips are too large at the top.
Great Fit(2011-12-16)
I just bought a set of these for my New Model Blackhalk Convertable .357/9mm with lock. I was skeptical that they would fit as read on other posts on the internet, but when they arived they fit great. A little tight to align on the internal grip pins, but they don't move. They look good and enhance the revolver over the factory black grips. Thanks Brownells!
Look and fit grate on my N.M.B.H 357(2014-05-07)
BOUGHT A SET FOR MY NEW MODEL BLACK HAWK 357 XRN 3RED PINS LINED RIGHT UP!!!! PUT THE SCREW IN TOOK NOTIME TO PUT THEM ON. LOOK & FIT GRATE.CAN'T SAY ANYTHING THAT'S NOT SO GRATE ABOUT IT SO TIME TO SHOOT!!! GOOD BY & GOOD BUY
Not bad for thirty bucks...(2014-11-13)
Bought two pairs: one for a Blackhawk and one for a Single Six. Both pairs required minor fitting. The grips look great and are much better than the cheesy hard plastic "cheese grater" grips that come from the factory and fill the hand well.
Nice grips(2015-02-05)
Fit my 41 NM Blackhawk with lock like a glove. Much nicer than the factory plastic.
Beautiful BUT Thick and Slippery(2015-03-21)
This is a GORGEOUS replacement to the black stock grip that comes with the Ruger Single-Six BUT:
1) The grip is THICK, while the stock grip is nice and thin (nice and thin, that is - for small hands like mine). / I had to use a coarse wood file to file down the grips so that they would work with my relatively small hands.
2) The grip is SLIPPERY/ SMOOTH - which I do not like. / But, I fixed this problem with the already mentioned filing. After filing, I simply applied some oil to the filed surfaces, and now the grips are neither too thick, nor are they too slippery.
NOW the grips are BOTH GORGEOUS and highly FUNCTIONAL.
Looks good, but (2015-06-26)
Grip looks great, but modifications had to be made in order to fit. Sanding to top of grip and widing of the grip anchor holes had to be made.
Fits my .357 New Model B.H.(2016-02-17)
Got these grips for my New Model Blackhawk chambered for .357 with a conversion 9mm Luger cylinder, they fit tight and look beautiful. Feels good in the hand and yes they come with a screw so you don't have to buy a screw for them. I'm very happy with them overall no complaints here.
Hjälp och kontakt
(0) 
Nyhetsbrev
Klassisk visning
Mobilvisning